Andy_B Posted March 1, 2020 Report Share Posted March 1, 2020 (edited) This could be a case of a little knowledge being a dangerous thing, but wouldn't it be a perfectly sensible thing to do to use a modern multigrade oil in a vintage engine? Say a 5W30 instead of a "classic" SAE30? As I understand, it'll still be as viscous as a hot SAE30 when it's hot, and no less viscous than a hot SAE30 when cold. Don't the advantages of multigrade apply perfectly well to a vintage engine? Thinking of using 5W30 or perhaps just 20W50 in my JP2. Am I a dangerous loon (please those that know me judge this purely on the oil idea)? Edited March 1, 2020 by Andy_B Update Link to comment Share on other sites More sharing options...
BWM Posted March 1, 2020 Report Share Posted March 1, 2020 As a Jp only has rudimentary screen type filters it would not be wise to use anything other than a mineral type oil, they deposit the solids rather than carrying them until they are filtered out. There is more to it than this but i was warned against using modern oils by people i trust as authorities on these engines. Link to comment Share on other sites More sharing options...
GUMPY Posted March 1, 2020 Report Share Posted March 1, 2020 Don't use modern synthetic oils in a JP unless you want to have to pay for a rebuild. Why would you anyway the older oils are half the price of the modern synthetic my car uses. Link to comment Share on other sites More sharing options...
frangar Posted March 1, 2020 Report Share Posted March 1, 2020 Morris make “Golden Film” for a reason....as others have said modern oils in a JP is going to end in tears! The engine simply isn’t made to the right tolerances...or filtration Link to comment Share on other sites More sharing options...
OptedOut Posted March 1, 2020 Report Share Posted March 1, 2020 (edited) Modern oils with friction modifiers are no good for wet clutches in some types of gearbox. Edited March 1, 2020 by OptedOut Added info Link to comment Share on other sites More sharing options...
OldGoat Posted March 1, 2020 Report Share Posted March 1, 2020 One point to bear in mind - as well as the discussions above - is that a multigrade oil (typically) has a base oil (the lower figure in the specification) of xx with chemical improvers that make the oil appear to be as thick as whatever the mono oil would have bee at the higher temperature end. I found this out when I put 20/50 in a motor bike engine where the specification was a straight 50. It siezed after 45 miles... It's a lot more complicated than it seems. I asked Beta if I could put 10/40 (which is a semi synthetic) oil in my B50 - the answer was 'NO' and that's a modern engine. I have a load of 10/40 here... Link to comment Share on other sites More sharing options...
OptedOut Posted March 1, 2020 Report Share Posted March 1, 2020 I used 'modern car oil' in my 40 year old Suzuki, almost wrecked the clutch. IIRC old engines require the old spec of API-CC? Link to comment Share on other sites More sharing options...
Andy_B Posted March 1, 2020 Author Report Share Posted March 1, 2020 That's me told! Any favourite sources for 20-25 l of SAE30? Link to comment Share on other sites More sharing options...
mark99 Posted March 1, 2020 Report Share Posted March 1, 2020 (edited) Try ebay. Also "farm" suppliers via google who do bulk for tractors etc. It's not hard to source. Morris Golden Film is what we use. Edited March 1, 2020 by mark99 Link to comment Share on other sites More sharing options...
TheBiscuits Posted March 1, 2020 Report Share Posted March 1, 2020 6 minutes ago, Andy_B said: That's me told! Any favourite sources for 20-25 l of SAE30? Morris Oils. https://www.morrislubricants.co.uk/products/classsteam/classic-engine-oils/golden-film-sae-30-classic-motor-oil.html Either online, or find a local dealer - my local tractor parts place stock a full range of Morris Oils, but not the Golden Film. They don't mind adding a drum to their next order though, as Morris will be sending a truck up to them twice a month. Link to comment Share on other sites More sharing options...
OptedOut Posted March 1, 2020 Report Share Posted March 1, 2020 Our local motor factors sell API CC in multigrades, seems OK so far in our Lister HA2 Link to comment Share on other sites More sharing options...
David Mack Posted March 1, 2020 Report Share Posted March 1, 2020 When I last looked a couple of websites catering for air cooled VW campervans were the cheapest online source of Morris Classic SAE30 oil. Link to comment Share on other sites More sharing options...
matty40s Posted March 1, 2020 Report Share Posted March 1, 2020 You dont say where you are Andy? Plenty of Morris Goldenfilm 30 out there. I wouldn't stick anything else in my engine. Link to comment Share on other sites More sharing options...
frangar Posted March 1, 2020 Report Share Posted March 1, 2020 Strictly speaking for a temperate UK climate a JP should have SAE20 but given our hotter summers and ease of availability then SAE30 is a good second choice. I’ve always used 20 but due to hotter summers I’m thinking of swapping to 30 this year....still pondering! Link to comment Share on other sites More sharing options...
BWM Posted March 2, 2020 Report Share Posted March 2, 2020 11 hours ago, Andy_B said: That's me told! Any favourite sources for 20-25 l of SAE30? Last batch i bought was from marine engine services, reasonable price and they ran it out to me (at Lapworth). They supply Rockoil, as did Peter Thompson before he sold the business. If you have a dry sump set up it will need 30 - 35 litres to fill, i normally buy two and the balance goes towards the next change and leaves a bit spare for topping up the cylinder head reserves. 10 hours ago, frangar said: Strictly speaking for a temperate UK climate a JP should have SAE20 but given our hotter summers and ease of availability then SAE30 is a good second choice. I’ve always used 20 but due to hotter summers I’m thinking of swapping to 30 this year....still pondering! I've been toying with the idea of using sae 20 as hand starting is difficult to say the least in winter, do you get much of a drop in pressure in hot spells with 20? Link to comment Share on other sites More sharing options...
frangar Posted March 2, 2020 Report Share Posted March 2, 2020 20 minutes ago, BWM said: I've been toying with the idea of using sae 20 as hand starting is difficult to say the least in winter, do you get much of a drop in pressure in hot spells with 20? I’ve always run on SAE20....from cold I get 20-22psi at tickover....after a days running it’s at about 17-18psi at tickover....rising to 20psi when running at normal canal speed. So if the gauge is accurate then it’s not bad..it’s certainly possible to hand start in winter...usually on the first go. My only real reason for changing is going off the temperature specs in the manual! 1 Link to comment Share on other sites More sharing options...
gbclive Posted March 2, 2020 Report Share Posted March 2, 2020 I’ve just ordered a 25L can of Morris Classic Golden Film SAE 30 for £110.86 inc VAT and free delivery, direct from Morris Lubricants. (Their online quoted prices are without VAT). For me it was the most convenient option. Link to comment Share on other sites More sharing options...
Jon57 Posted March 2, 2020 Report Share Posted March 2, 2020 Just wondering if anyone as used this company for marine oil? https://www.aztecoils.co.uk/products-marine-marineoils.html no connection. Link to comment Share on other sites More sharing options...
Mike Tee Posted March 2, 2020 Report Share Posted March 2, 2020 prices on this site look good, and buy enough and get free delivery https://www.classic-oils.net/Oils-by-Application-and-Type/Four-Stroke-Engine-Oils/SAE-30-Monogrades Link to comment Share on other sites More sharing options...
alan_fincher Posted March 2, 2020 Report Share Posted March 2, 2020 3 hours ago, gbclive said: I’ve just ordered a 25L can of Morris Classic Golden Film SAE 30 for £110.86 inc VAT and free delivery, direct from Morris Lubricants. (Their online quoted prices are without VAT). For me it was the most convenient option. Seldom a good idea to buy direct from Morris. Can usually be found cheaper elsewhere. Without trying too hard, it is £95 from Classic Oils, with free delivery. https://www.classic-oils.net/Morris-Golden-Film-SAE-30 1 Link to comment Share on other sites More sharing options...
gbclive Posted March 2, 2020 Report Share Posted March 2, 2020 1 hour ago, Mike Tee said: prices on this site look good, and buy enough and get free delivery https://www.classic-oils.net/Oils-by-Application-and-Type/Four-Stroke-Engine-Oils/SAE-30-Monogrades 39 minutes ago, alan_fincher said: Seldom a good idea to buy direct from Morris. Can usually be found cheaper elsewhere. Without trying too hard, it is £95 from Classic Oils, with free delivery. https://www.classic-oils.net/Morris-Golden-Film-SAE-30 Thanks Mike and thanks Alan. Classic Oils it is then? Link to comment Share on other sites More sharing options...
BWM Posted March 2, 2020 Report Share Posted March 2, 2020 1 hour ago, alan_fincher said: Seldom a good idea to buy direct from Morris. Can usually be found cheaper elsewhere. Without trying too hard, it is £95 from Classic Oils, with free delivery. https://www.classic-oils.net/Morris-Golden-Film-SAE-30 You could almost think that Morris have included the price of delivery in their 'with free delivery'! Link to comment Share on other sites More sharing options...
Andy_B Posted March 2, 2020 Author Report Share Posted March 2, 2020 VW specialists was a good call - cheaper than Morris direct and free devilry :-) Thanks all for help and advice. Link to comment Share on other sites More sharing options...
Split Pin Posted March 2, 2020 Report Share Posted March 2, 2020 (edited) 6 hours ago, Jon57 said: Just wondering if anyone as used this company for marine oil? https://www.aztecoils.co.uk/products-marine-marineoils.html no connection. Have been using this one from them for over 30 years in my Gardner https://www.aztecoils.co.uk/Topics/commercial_-_monogrades/hdx_30_api_secc_mon007.htm They used to have an agent in West Bromwich which is nearer to me, so able to collect it, about £45.00 for 20lts the last time I brought some, usually around 50% of Morris's for the same spec oil Can still get it through the new owners who also do other manufaturers. Edited March 2, 2020 by Split Pin reword Link to comment Share on other sites More sharing options...
dmr Posted March 2, 2020 Report Share Posted March 2, 2020 4 hours ago, BWM said: You could almost think that Morris have included the price of delivery in their 'with free delivery'! Well of course they do. "There is no such thing as a free lunch" just creative ways of paying for it. eBay and Amazon are good examples, the free postage stuff is always about £1.50 more expensive. I buy from Morris on-line 25 litres at a time. Once you are on the mailing list you get 10% discount offers two or three times each year, so I try to get my drum during these offers. I did ask a local dealer if they could get some in for me but they wanted a lot more than Morris OnLine. and Morris deliver direct to the boat. ................Dave Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now