Jump to content

Featured Posts

Posted

Hi All,

 

I've got a Pete Nicholls boat built in 1982. She's in really good nick and I've generally had her base plate backed at my local marina. I know many folk do not do this, but I can tell you that the bitumen has always been on there when she's been re-blacked, so it's not always the case of 'don't bother, it will come off on the bottom of the canal'!

 

 I am  by Braunston, heading south on the Oxford Canal. can anyone recommend any boat yards where they will also black the baseplate?

 

Thank you

Posted
2 minutes ago, MaggieA said:

Hi All,

 

I've got a Pete Nicholls boat built in 1982. She's in really good nick and I've generally had her base plate backed at my local marina. I know many folk do not do this, but I can tell you that the bitumen has always been on there when she's been re-blacked, so it's not always the case of 'don't bother, it will come off on the bottom of the canal'!

 

 I am  by Braunston, heading south on the Oxford Canal. can anyone recommend any boat yards where they will also black the baseplate?

 

Thank you

 

 

I'd suggest that unless you find a heated dry dock, you don't even try to get it blacked for another 3 months at least (or you will be doing it again before the end of the year)

Posted

If the blacking isn't getting scrapped off, then go for it. Won't do any harm and might do some good. Just extra time and cost to do. Some combinations of canals and boat scrape their bottoms along for much of the way, so not a lot of point in blacking there.

Posted

Not that close to Braunston, sorry, but the dry-dock in Northwich has high enough bostocks to get underneath and black the bottom. They do DIY (and supply a nifty trolley to lie on a wheel yourself underneath) or full service including collection and delivery if you want. No connection other than a satisfied customer.

 

http://www.northwichdrydock.com/

 

MP.

 

 

Posted
13 minutes ago, matty40s said:

Head to Debdale, purpose built sheds and lifting kit.

^^^ seconded - had our boat done there (including base plate) not that far north of Braunston

Posted
56 minutes ago, matty40s said:

Head to Debdale, purpose built sheds and lifting kit.

Had a big job done there a couple of years ago.

 

Absolutely first class workmanship but really expensive.

Posted (edited)
1 hour ago, MoominPapa said:

Not that close to Braunston, sorry, but the dry-dock in Northwich has high enough bostocks to get underneath and black the bottom. They do DIY (and supply a nifty trolley to lie on a wheel yourself underneath) or full service including collection and delivery if you want. No connection other than a satisfied customer.

 

http://www.northwichdrydock.com/

 

MP.

 

 

 

I  have just noticed looking at that photo where an old anode was removed and the difference in the blacking around it.

 

 

DSCF1412.JPG

Edited by ditchcrawler
Posted (edited)
25 minutes ago, Alan de Enfield said:

 

removed

 

 

 

Yes  , the anodes been  chopped off, you are correct

Edited by matty40s
  • Haha 2
Posted

I'm in Braunston Boats on the 8th of March. So I'm thinking I could black the base plate my self.  I am concerned about the time of year, but I have slipped up before in May, so it's always a gamble in the UK 

Posted

I am certain the Braunston Boats trolley is not high enough to get under the boat.  I also don"t think they accommodate  DIY blacking.

 

N

Posted

That pic. of the area around the anode is interesting. Seems that they don't really do very much unless you use many of them spaced at maybe 2 - 3 m intervals. (I would always use them near propellers and other mixed metals though)  

Posted
38 minutes ago, Bee said:

That pic. of the area around the anode is interesting. Seems that they don't really do very much unless you use many of them spaced at maybe 2 - 3 m intervals. (I would always use them near propellers and other mixed metals though)  

It looks slightly different for an area of about 6 foot by two

  • 2 weeks later...
Posted

Mine desperately needs blacking.  Is it too early in the year? Am thinking a dry dock is always going to be a damp environment any time of year.  Cold temperatures too must make a difference ?

Posted (edited)
16 minutes ago, Norm55 said:

Mine desperately needs blacking.  Is it too early in the year? Am thinking a dry dock is always going to be a damp environment any time of year.  Cold temperatures too must make a difference ?

You could light a bonfire under the boat to keep it nice and dry whilst painting. Or to make sure it's dry while painting wave a hot air gun about just ahead of your paint brush,. If your right handed work towards your left, if your left handed work towards your right so that the hot air gun is always ahead of the paint brush. :closedeyes:

Edited by bizzard
  • Horror 1
Posted
On 01/02/2021 at 11:25, MaggieA said:

Hi All,

 

I've got a Pete Nicholls boat built in 1982. She's in really good nick and I've generally had her base plate backed at my local marina. I know many folk do not do this, but I can tell you that the bitumen has always been on there when she's been re-blacked, so it's not always the case of 'don't bother, it will come off on the bottom of the canal'!

 

 I am  by Braunston, heading south on the Oxford Canal. can anyone recommend any boat yards where they will also black the baseplate?

 

Thank you

Debdale marina just north of foxton locks do the bottom I had mine done and afterwards going along used 200 rpm less for same speed. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.