Willber G Posted January 9, 2014 Report Share Posted January 9, 2014 OP AWOL. Link to comment Share on other sites More sharing options...
Dalesman Posted January 10, 2014 Report Share Posted January 10, 2014 Is there an easy way? Looking for a simple paint on solution that removes the tarnish on neglected brass . Something similar to using oxalic acid to remove rust stains. Paint it on leave for a few mins then wash it off Shaun Try this one...http://www.miracleleisureproducts.co.uk/cleaning-products/miracle-brass-brite/prod_11.html Link to comment Share on other sites More sharing options...
Athy Posted May 1, 2016 Report Share Posted May 1, 2016 (edited) Yes shiny sinks, obtainable from some supermarkets, gets really grotty brass shiny with little effort. Just needs a tart up with brasso afterwards. Pursuant to your recommending this in another thread (which I can't find at the moment) I scoured (if you see what I mean) the very large branch of Morrison's at Banbury on Friday for this product, but alas they don't stock it. I could not find any in Tesco today either. I guess that as a Hudsonian you would not deign to patronise a lesser supermarket than Waitrose - is that where you bought it? Edited May 1, 2016 by Athy Link to comment Share on other sites More sharing options...
mark99 Posted May 1, 2016 Report Share Posted May 1, 2016 (edited) Pursuant to your recommending this in another thread (which I can't find at the moment) I scoured (if you see what I mean) the very large branch of Morrison's at Banbury on Friday for this product, but alas they don't stock it. I could not find any in Tesco today either. I guess that as a Hudsonian you would not deign to patronise a lesser supermarket than Waitrose - is that where you bought it? Ask Nicks butler. Nick as a Hudson owner knows the high level but leaves the lower to tradesmen. Edited May 1, 2016 by mark99 Link to comment Share on other sites More sharing options...
dave moore Posted May 1, 2016 Report Share Posted May 1, 2016 Barkeeper's Friend made into a paste easily removes old tarnish with little effort, followed by Brasso. Dave Link to comment Share on other sites More sharing options...
nbfiresprite Posted May 1, 2016 Report Share Posted May 1, 2016 Life is to short to be spent polishing brass, So paint them and use the time to do something less boring instead. 2 Link to comment Share on other sites More sharing options...
furnessvale Posted May 1, 2016 Report Share Posted May 1, 2016 Pursuant to your recommending this in another thread (which I can't find at the moment) I scoured (if you see what I mean) the very large branch of Morrison's at Banbury on Friday for this product, but alas they don't stock it. I could not find any in Tesco today either. I guess that as a Hudsonian you would not deign to patronise a lesser supermarket than Waitrose - is that where you bought it? Shiny Sinks seems to have incurred the displeasure of the big supermarkets who no longer stock it. Now it is normally found in "Village Saver" type shops. George ex nb Alton retired Link to comment Share on other sites More sharing options...
Nightwatch Posted May 1, 2016 Report Share Posted May 1, 2016 How much is a suitable lathe? Link to comment Share on other sites More sharing options...
steven wilkinson Posted May 1, 2016 Report Share Posted May 1, 2016 Life is to short to be spent polishing brass, So paint them and use the time to do something less boring instead. Exactly. Either the same colour, or a contrast, to the roof, and get out cruising. And if you polish your tiller in full view of people, you WILL get some rude comments! Link to comment Share on other sites More sharing options...
DHutch Posted May 1, 2016 Report Share Posted May 1, 2016 Amway Metal Cleaner (www.amway.co.uk/product/112160,l-o-c-metal-cleaner#.Us6O0PNFCUk) is the easiest I have found for use on the boat, but you can't beat a proper mop and polishing soap if the brass is not fitted. Amway is good, as is getting it on a buffing mop if you can. This is what you need, Ive used lots of this stuff, and very intresting to watch too.... http://www.miracleleisureproducts.co.uk/cleaning-products/miracle-brass-brite/prod_11.html Also their paste version. https://www.miracleleisureproducts.co.uk/brass-mate.html Green scouring pads and brass also works, as long as it's a fairly fine and uniform pad else you can get scratches. Also, paint plenty, lacquer odd bits, and allow much of it to got its natural shade. Daniel Link to comment Share on other sites More sharing options...
dave moore Posted May 1, 2016 Report Share Posted May 1, 2016 Polished brass was a measure of the pride taken by working boaters in their craft. I try to maintain those standards, despite not living aboard as they did, along with white rope work and a clear, uncluttered roof. Few modern boaters may understand, Dave Link to comment Share on other sites More sharing options...
bag 'o' bones Posted May 1, 2016 Report Share Posted May 1, 2016 (edited) Polished brass was a measure of the pride taken by working boaters in their craft. I try to maintain those standards, despite not living aboard as they did, along with white rope work and a clear, uncluttered roof. Few modern boaters may understand, Dave Similar to old school signalmen who polished the levers until they shone Edited May 1, 2016 by bag 'o' bones Link to comment Share on other sites More sharing options...
Sea Dog Posted May 1, 2016 Report Share Posted May 1, 2016 Polished brass was a measure of the pride taken by working boaters in their craft. I try to maintain those standards, despite not living aboard as they did, along with white rope work and a clear, uncluttered roof. Few modern boaters may understand, Dave Absolutely. So often it's when you're doing the cleaning or other general husbandry that you notice the little things that need attention before they become bigger things. If you can't be bothered with the details, what else are you neglecting? Link to comment Share on other sites More sharing options...
alan_fincher Posted May 1, 2016 Report Share Posted May 1, 2016 Shiny Sinks seems to have incurred the displeasure of the big supermarkets who no longer stock it. Last place I bought any was Wilkinsons. I've no idea if they still have it, though. Link to comment Share on other sites More sharing options...
Rob-M Posted May 1, 2016 Report Share Posted May 1, 2016 I often polish the tiller and slide runners whilst boating along on a straight bit of cut. Far easier polishing on a butty when on cross straps as generally not much steering required but only a chimney and chain to polish on the butty. Link to comment Share on other sites More sharing options...
furnessvale Posted May 1, 2016 Report Share Posted May 1, 2016 Similar to old school signalmen who polished the levers until they shone I have even visited boxes where the signalman tied dusters around his shoes so he polished the floor as he walked. Needless to say, if you needed to sign the book it was brought to the door for you, you certainly didn't get over the threshold with your dirty boots on! George ex nb Alton retired Link to comment Share on other sites More sharing options...
David Mack Posted May 1, 2016 Report Share Posted May 1, 2016 Last place I bought any was Wilkinsons. I've no idea if they still have it, though. Its on their website: http://www.wilko.com/kitchen-cleaning-products/homecare-shiny-sinks-290ml/invt/0224088 Link to comment Share on other sites More sharing options...
mark99 Posted May 2, 2016 Report Share Posted May 2, 2016 (edited) Talking about signal boxes what were the cloths used for that dangle off the levers? Was that for polishing? Edited May 2, 2016 by mark99 Link to comment Share on other sites More sharing options...
FadeToScarlet Posted May 2, 2016 Report Share Posted May 2, 2016 Talking about signal boxes what were the cloths used for that dangle off the levers? Was that for polishing? I think so you didn't smudge your polished levers when you used them Link to comment Share on other sites More sharing options...
mark99 Posted May 2, 2016 Report Share Posted May 2, 2016 I think polished external brass on a narrowboat looks spiffingly good. It's like a ritual when we are out. Get up, whilst breakfast is cooking quick wipe over with brass cleaner if the weather is set fair. Link to comment Share on other sites More sharing options...
Athy Posted May 2, 2016 Report Share Posted May 2, 2016 Talking about signal boxes what were the cloths used for that dangle off the levers? Was that for polishing? I think there was a cosmetic element to them, yes, but they were also there because some of the levers, if they operated signals a good distance away, were bloody hard to pull, so the cloths or dusters make them less harsh on the signalman's hands. At least, that's what I remember the signalman at Hertford North box telling me when I was allowed into the box circa 1970. We have at least one professional signalman on CWF who will surely know. Link to comment Share on other sites More sharing options...
Sea Dog Posted May 2, 2016 Report Share Posted May 2, 2016 Talking about signal boxes what were the cloths used for that dangle off the levers? Was that for polishing? The moisture on your hands will cause the metal to tarnish if left. So now you've polished all your brightwork Mark.... get your mucky paws off it! Link to comment Share on other sites More sharing options...
mango Posted May 2, 2016 Report Share Posted May 2, 2016 Oxalic acid works on brass as well as rusty steel. Barkeepers friend contains oxalic acid, or did. Nitric acid is good for getting off tarnish, but you really need to take the brass off the boat, and it's hard to get hold of. Amway Metal Cleaner (www.amway.co.uk/product/112160,l-o-c-metal-cleaner#.Us6O0PNFCUk) is the easiest I have found for use on the boat, but you can't beat a proper mop and polishing soap if the brass is not fitted. N Oxalic acid is rather toxic and since a solution is colourless it might be mistaken for water. I suggest it is labelled as poisonous and kept away from children. Link to comment Share on other sites More sharing options...
Harpur Hill Posted May 2, 2016 Report Share Posted May 2, 2016 Oxalic acid is rather toxic and since a solution is colourless it might be mistaken for water. I suggest it is labelled as poisonous and kept away from children. Lots of oxalic acid in rhubarb maybe we could use a stick to clean brass? The leaves are actually a much richer source which is why they are so poisonous; since they are usually slung perhaps they could be scrunched up & used as a cleaner. HH Link to comment Share on other sites More sharing options...
mango Posted May 2, 2016 Report Share Posted May 2, 2016 Lots of oxalic acid in rhubarb maybe we could use a stick to clean brass? The leaves are actually a much richer source which is why they are so poisonous; since they are usually slung perhaps they could be scrunched up & used as a cleaner. HH Coca-Cola contains phosphoric acid, like toilet limescale remover. It removes the tarnish from copper coins, so perhaps Coke would be useful for cleaning mushrooms. I keep meaning to try. I suspect that limescale remover would be a bit too aggressive and it's another toxic chemical to keep away from kids. Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now