alan_fincher Posted May 25, 2018 Report Share Posted May 25, 2018 7 minutes ago, RLWP said: What about what they are fitting? I don't know what they are doing, but am highly doubtful they have a spare 1930s Woolwich "bow top" to graft on. I'm genuinely intrigued - which no doubt was the aim of the original posting! Link to comment Share on other sites More sharing options...
RLWP Posted May 25, 2018 Report Share Posted May 25, 2018 So, might even be newer than what was removed... Richard Link to comment Share on other sites More sharing options...
Athy Posted May 25, 2018 Report Share Posted May 25, 2018 The two original photos are perhaps the "after" part of a CanalTime advert. Link to comment Share on other sites More sharing options...
alan_fincher Posted May 25, 2018 Report Share Posted May 25, 2018 Just now, RLWP said: So, might even be newer than what was removed... Richard That is usually the case when you replace any bits of these boats. Noted exception................ When Capricorn was lengthened recently, it used sides that had previously been cut out, and were in storage - though even there, I guess, the bottom would have been new I guess Sextans qualifies as containing bits of a boat that are nominally older than it is, as it has 10 feet of Thea in it, and Thea was originally delivered some months after Sextans, I think. Link to comment Share on other sites More sharing options...
RLWP Posted May 25, 2018 Report Share Posted May 25, 2018 Now, I'd say that started off as trying to remove a whacking great dent in the guard rail, and it has developed onto something more - comprehensive Richard Link to comment Share on other sites More sharing options...
koukouvagia Posted May 25, 2018 Report Share Posted May 25, 2018 (edited) 3 hours ago, mark99 said: I like this picture (post #6)- it's not staged just a snapshot showing just how much sheer work and effort must go into reformation of a historic. The original plan for Hampton was merely to sheath the back cabin in steel. I was soon disabused of this idea. My approach is to trust the real experts to advise and leave them to get on with the job. Each week I went up to WFBCo and each week Graeme discovered more rot and decay. The job turned out to be a full rebuild of the back end and cabin. It took ten months of highly skilled work and anyone interested will be able to see the result at this year's Braunston Show. Edited May 25, 2018 by koukouvagia Link to comment Share on other sites More sharing options...
davidg Posted May 25, 2018 Report Share Posted May 25, 2018 From Brinklow Boat Services: Does anyone have a job lot of white gloss going cheap? 1 Link to comment Share on other sites More sharing options...
RLWP Posted May 25, 2018 Report Share Posted May 25, 2018 13 minutes ago, davidg said: From Brinklow Boat Services: Does anyone have a job lot of white gloss going cheap? I have some day-old chicks 1 Link to comment Share on other sites More sharing options...
70liveaboard Posted May 25, 2018 Report Share Posted May 25, 2018 (edited) When does a restoration, stop being a restoration and just becomes another boat.. Some builders will restore you a boat, from the bow right back to the stern, then say 'there you go, I've restored it to its original glory'. When in fact to others, its just a new boat.. Albeit, probably a very nice boat, built to an old design. We've always been very wary, when it comes to restored boats. It would depend on what was still left, that is original. Then there are the replicas. We've just seen an ad, where the 'rivets' look as though they have been delivered by a machine gun. ? Edited May 25, 2018 by 70liveaboard Link to comment Share on other sites More sharing options...
AMModels Posted May 25, 2018 Report Share Posted May 25, 2018 I think we've all got star in our eyes. 1 Link to comment Share on other sites More sharing options...
Ray T Posted May 25, 2018 Report Share Posted May 25, 2018 3 hours ago, davidg said: From Brinklow Boat Services: Does anyone have a job lot of white gloss going cheap? No I've got a spare bottle of T Cut, that should sort it. Link to comment Share on other sites More sharing options...
roland elsdon Posted May 25, 2018 Report Share Posted May 25, 2018 Job lot of white gloss? You been down in lunun looking at how they ‘modernise’ boats bought from whilton? Link to comment Share on other sites More sharing options...
Paul H Posted May 25, 2018 Report Share Posted May 25, 2018 (edited) 1 hour ago, roland elsdon said: Job lot of white gloss? You been down in lunun looking at how they ‘modernise’ boats bought from whilton? Or modernise into a luxury 60s cruise boat! Edited May 25, 2018 by Paul H 1 Link to comment Share on other sites More sharing options...
alan_fincher Posted May 25, 2018 Report Share Posted May 25, 2018 7 hours ago, alan_fincher said: That is usually the case when you replace any bits of these boats. Noted exception................ When Capricorn was lengthened recently, it used sides that had previously been cut out, and were in storage - though even there, I guess, the bottom would have been new I guess Sextans qualifies as containing bits of a boat that are nominally older than it is, as it has 10 feet of Thea in it, and Thea was originally delivered some months after Sextans, I think. EDITED to acknowledge that is nonsense as Thea is newer than Sextans not older - Doh! Link to comment Share on other sites More sharing options...
Steve Priest Posted May 25, 2018 Author Report Share Posted May 25, 2018 Damn, wrong boat. I’m sure he pointed at this one, but all little Woolwiches look the same when you’ve had a few. Ah well, never mind, Anyone up for crowdfunding? 3 Link to comment Share on other sites More sharing options...
alan_fincher Posted May 26, 2018 Report Share Posted May 26, 2018 8 hours ago, Steve Priest said: Damn, wrong boat. I’m sure he pointed at this one, but all little Woolwiches look the same when you’ve had a few. Ah well, never mind, Anyone up for crowdfunding? I shall be wary of bringing our boats up to Brinklow if that's the best you lot can do. I don't want to end up with the 40 foot boat as a full length one, and the full length one reduced to a tug! Link to comment Share on other sites More sharing options...
Derek R. Posted May 26, 2018 Report Share Posted May 26, 2018 Don't go doing a "Ratner" Steve! Link to comment Share on other sites More sharing options...
Rose Narrowboats Posted May 26, 2018 Report Share Posted May 26, 2018 They make good push tugs you know, keep cutting! Link to comment Share on other sites More sharing options...
Steve Priest Posted May 27, 2018 Author Report Share Posted May 27, 2018 Ok, it is, as most of you know, the Star, ex Water Rambler. I have been cutting off the top bends which were fitted some years ago and will be replacing them with something hopefully more convincing. I took some photos and thought that we might have some fun with it. The second photo is more or less back to where waterways cut it, I might try to post another photo when the work is finished Steve 2 Link to comment Share on other sites More sharing options...
Bee Posted May 27, 2018 Report Share Posted May 27, 2018 15 minutes ago, Steve Priest said: Ok, it is, as most of you know, the Star, ex Water Rambler. I have been cutting off the top bends which were fitted some years ago and will be replacing them with something hopefully more convincing. I took some photos and thought that we might have some fun with it. The second photo is more or less back to where waterways cut it, I might try to post another photo when the work is finished Steve B******d, had me fooled! 1 Link to comment Share on other sites More sharing options...
alan_fincher Posted May 27, 2018 Report Share Posted May 27, 2018 1 hour ago, Steve Priest said: Ok, it is, as most of you know, the Star, ex Water Rambler. I have been cutting off the top bends which were fitted some years ago and will be replacing them with something hopefully more convincing. I took some photos and thought that we might have some fun with it. The second photo is more or less back to where waterways cut it, I might try to post another photo when the work is finished Steve Thank Gawd for that - it seems that I was OK to stick my neck out on this..... On 25/05/2018 at 10:21, alan_fincher said: Yes, As the photo, (but not Steve's explanation of it!), seems genuine, my best guess is that what is being cut off, (or at least most of it), is not of 1930s origin. It's obvious if you think about it that Star wasn't going to be original in hat department, but I've obviouslmy never looked at it closely enoughto realise that what had been put there wasn't particularly convincing! Link to comment Share on other sites More sharing options...
NB Esk Posted May 27, 2018 Report Share Posted May 27, 2018 1 hour ago, Bee said: B******d, had me fooled! Lol, it only fooled some of us.....good joke though. ? Link to comment Share on other sites More sharing options...
David Schweizer Posted May 27, 2018 Report Share Posted May 27, 2018 I more or less guessed it was a spoof, given away by the support framework tacked to the bow, to stop it dropping when the top bends were removed. Link to comment Share on other sites More sharing options...
alan_fincher Posted May 27, 2018 Report Share Posted May 27, 2018 This may be of interest for those who are not that well acquainted with "Star"http://www.hnbc.org.uk/boats/star Link to comment Share on other sites More sharing options...
David Schweizer Posted May 27, 2018 Report Share Posted May 27, 2018 44 minutes ago, alan_fincher said: This may be of interest for those who are not that well acquainted with "Star"http://www.hnbc.org.uk/boats/star It also appears as if the cabin roof got the same treatment with no upsweep at the back. Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now