Philip Posted April 23, 2021 Report Share Posted April 23, 2021 (edited) I'm looking for a water-resistant plank/bench to fit to the stern rail to make for a bit comfier seating. I'll look to add some waterproof cushion padding afterwards. Does anyone know a good material and website to use for ordering please? I've seen some that appear to be made of wood, with a black plastic/rubber coating around the outside. I'd like to specify my own dimensions because if it is too wide then it'll get in the way of the throttle lever; too deep it'll get in the way of the tiller etc. Edited April 23, 2021 by Philip Link to comment Share on other sites More sharing options...
Athy Posted April 23, 2021 Report Share Posted April 23, 2021 As you will surely be sitting on it only when the boat is moored, getting in the way is perhaps less of an issue. Link to comment Share on other sites More sharing options...
Philip Posted April 23, 2021 Author Report Share Posted April 23, 2021 Just now, Athy said: As you will surely be sitting on it only when the boat is moored, getting in the way is perhaps less of an issue. I'm planning on sitting on it for at least part of the normal 10-12 hour cruising days I'll be doing! Standing/resting on the narrow stern rail after a while will be a bit uncomfortable. 1 Link to comment Share on other sites More sharing options...
David Mack Posted April 23, 2021 Report Share Posted April 23, 2021 Link to comment Share on other sites More sharing options...
Philip Posted April 23, 2021 Author Report Share Posted April 23, 2021 It isn't a tractor seat I'm after, it is just a wider plank to drill onto the top of the stern taff rail, to make sitting down a bit comfier. Many boats have them in some form, it is a cruiser stern I should add. 1 Link to comment Share on other sites More sharing options...
Machpoint005 Posted April 23, 2021 Report Share Posted April 23, 2021 We had one, until it was pinched a few years ago. Steering is much more convenient, and less hazardous to the crew, without it. Link to comment Share on other sites More sharing options...
Philip Posted April 23, 2021 Author Report Share Posted April 23, 2021 https://www.midwayboats.co.uk/boatsforsale-332.html I'm just on about something like this, you can see the wider plank screwed to the taff rail. 1 Link to comment Share on other sites More sharing options...
pete.i Posted April 23, 2021 Report Share Posted April 23, 2021 Those that have them have, usually, made their own from suitable wood. There is a danger if that seat is used when cruising as I am sure you are aware, if the rudder hits something it can swing the tiller and knock anyone sat on that seat into the water very much into the vicinity of that big metal whirly thing, nasty. 2 Link to comment Share on other sites More sharing options...
zenataomm Posted April 23, 2021 Report Share Posted April 23, 2021 It sounds as if OP is intent on a comfy suicide seat. Link to comment Share on other sites More sharing options...
Philip Posted April 23, 2021 Author Report Share Posted April 23, 2021 15 minutes ago, pete.i said: Those that have them have, usually, made their own from suitable wood. There is a danger if that seat is used when cruising as I am sure you are aware, if the rudder hits something it can swing the tiller and knock anyone sat on that seat into the water very much into the vicinity of that big metal whirly thing, nasty. Isn't that the case even if sat on the stern rail though? The swinging tiller could knock a person in sat on that and if anything is more likely because it is narrower and you're sat closer to the edge. Are some storable fold-up chairs better, positioned so that they're forward of the tiller slightly? 1 Link to comment Share on other sites More sharing options...
Popular Post Alan de Enfield Posted April 23, 2021 Popular Post Report Share Posted April 23, 2021 16 minutes ago, Philip said: Isn't that the case even if sat on the stern rail though? The swinging tiller could knock a person in sat on that and if anything is more likely because it is narrower and you're sat closer to the edge. Exactly, thats why you never sit or stand within the arc of the tiller. They are known as suicide seats for a good reason. If you want to sit down whilst steering either buy a trad-stern boat, or convert your steering to a wheel. 5 Link to comment Share on other sites More sharing options...
Kendorr Posted April 23, 2021 Report Share Posted April 23, 2021 Just been working on mine. The wood is Iroko, which is naturally oily, but does require a coat of Danish oil once a year. 2 Link to comment Share on other sites More sharing options...
system 4-50 Posted April 23, 2021 Report Share Posted April 23, 2021 I can sit on my cruiser-stern bench with the tiller full over. Some cruiser-stern benches are riskier than others. Link to comment Share on other sites More sharing options...
Philip Posted April 23, 2021 Author Report Share Posted April 23, 2021 Doing a lot of single-handed boating, it is nice to have something comfy to sit on for a bit, whilst navigating long pounds. 1 Link to comment Share on other sites More sharing options...
Philip Posted April 23, 2021 Author Report Share Posted April 23, 2021 (edited) I've seen some cruiser-stern boats with a bench/plank seat located a foot or so below the stern rail, fixed to the stern rail supports. Is this a safer option? Like this example: Edited April 23, 2021 by Philip 1 Link to comment Share on other sites More sharing options...
Athy Posted April 23, 2021 Report Share Posted April 23, 2021 Probably if you sit on the front part of the side bench, which looks as if it would be outside the arc of the tiller. To sit within the arc of the tiller is to invite danger. Couldn't you just stand up? Link to comment Share on other sites More sharing options...
MarkH2159 Posted April 23, 2021 Report Share Posted April 23, 2021 Such doom and gloom in reply to a simple question. I would do exactly as you have suggested, find a picture or a boat with exactly what you want then either buy the wood, Iroko or other, and make it yourself or have a carpenter/joiner/boatbuilder do it to your specs. As you say, sitting on the steel rail or the wooden seat both have their 'dangers' but at least one is more comfortable than the other. 2 1 Link to comment Share on other sites More sharing options...
Athy Posted April 23, 2021 Report Share Posted April 23, 2021 12 minutes ago, MarkH2159 said: Such doom and gloom in reply to a simple question. ...or "prudent advice", as it is more often known. Link to comment Share on other sites More sharing options...
Alan de Enfield Posted April 23, 2021 Report Share Posted April 23, 2021 1 hour ago, Philip said: Doing a lot of single-handed boating, it is nice to have something comfy to sit on for a bit, whilst navigating long pounds. You have been informed of the dangers, you can now make an informed choice, at least the forum has taken the responsibilty of explaining the dangers, you are now free to ignore the advice or follow it. 4 Link to comment Share on other sites More sharing options...
Philip Posted April 23, 2021 Author Report Share Posted April 23, 2021 I can see the point on how sitting on a stern rail or any kind of seat within the arc of the tiller, with no protection behind, is potentially a hazard. I can't understand why you think it is still dangerous even in the latter picture I showed, clearly there is no danger of the tiller knocking you overboard when you have a foot or so of protection behind you from the stern rail and supports up against your back whilst sat down. Where is the hazard here? 1 Link to comment Share on other sites More sharing options...
___ Posted April 23, 2021 Report Share Posted April 23, 2021 2 minutes ago, Philip said: I can see the point on how sitting on a stern rail or any kind of seat within the arc of the tiller, with no protection behind, is potentially a hazard. I can't understand why you think it is still dangerous even in the latter picture I showed, clearly there is no danger of the tiller knocking you overboard when you have a foot or so of protection behind you from the stern rail and supports up against your back whilst sat down. Where is the hazard here? You get pinned between the tiller and the rail and suffer chest injuries. The issue of getting swiped by the tiller is one of low likelihood but high consequence. You make your choice based on your personal view of the risk. There’s no right or wrong. 3 Link to comment Share on other sites More sharing options...
Rob-M Posted April 23, 2021 Report Share Posted April 23, 2021 Check how far your tiller comes round when it is fully over to one side, on some boats the rudder will not the stern of the boat and so the tiller from traveling far enough to either send you flying over the stern or hit you in the chest. I have heard of someone getting broken ribs from being hit by a tiller. Link to comment Share on other sites More sharing options...
Detling Posted April 23, 2021 Report Share Posted April 23, 2021 I have seen recycled plastic bags made into planks which look good and won't rot. Some park benches use them. Link to comment Share on other sites More sharing options...
Phoenix_V Posted April 23, 2021 Report Share Posted April 23, 2021 3 hours ago, Detling said: I have seen recycled plastic bags made into planks which look good and won't rot. Some park benches use them. They are not as stiff as wood and therefore need to be thicker to avoid bending under load I would use iroko Link to comment Share on other sites More sharing options...
dixi188 Posted April 24, 2021 Report Share Posted April 24, 2021 On the subject of being injured by the tiller when going forwards. I have never considered it as a problem. In reverse yes, and I always stand forward of the tiller arc. The amount of rudder forward of the hinge line is very small so if something hits it the lever arm to deflect the rudder is very small compared to the lever arm of the tiller. Also anything hitting the rudder has to get through or round the prop first so I don't think anything very big could hit it. (I have had a log stop the prop though). I can't find a photo of my rudder at the moment. Am I being stupid to be in the tiller arc going forward? (8years of ownership and a number of years of hiring beforethat). 2 Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now