W+T Posted July 29, 2016 Author Report Share Posted July 29, 2016 Hi guys, first off, what a crock of you know what Wicks is, i thought BnQ was hard work, only got half what i went for, Anyway quick moan over Oh and i have so much more to bloody moan about with work, not good on the boat funds one bit I was going to buff the rails them back up like i did with the feet, but that will not be easy with the bow rail on a bench grinder buffer, so then i thought,to pickle them. How is it done, just apply the solution then lave for a while before washing off? Once when i was just starting out welding made a small tubular frame/stand as practice, for the life of i could not work not why i couldnt finish the weld, sent me crazy lol, I learned that part the hard way. I drilled 4mm holes in the centre of the feet already, yes a big bigger than needed but i snapped all my smaller bits. Thanks for the offer Steve, but i will have alot to clean up, a bow rail, two long top rails and two small hand rails aswell as the engine mount plate and winch frame, and thats not for the trailer you will see soon enough;) I will PM you Gazza, thanks. Link to comment Share on other sites More sharing options...
gazza Posted July 29, 2016 Report Share Posted July 29, 2016 Hi guys, first off, what a crock of you know what Wicks is, i thought BnQ was hard work, only got half what i went for, Anyway quick moan over Oh and i have so much more to bloody moan about with work, not good on the boat funds one bit I was going to buff the rails them back up like i did with the feet, but that will not be easy with the bow rail on a bench grinder buffer, so then i thought,to pickle them. How is it done, just apply the solution then lave for a while before washing off? Once when i was just starting out welding made a small tubular frame/stand as practice, for the life of i could not work not why i couldnt finish the weld, sent me crazy lol, I learned that part the hard way. I drilled 4mm holes in the centre of the feet already, yes a big bigger than needed but i snapped all my smaller bits. 20160729_165756.jpg Thanks for the offer Steve, but i will have alot to clean up, a bow rail, two long top rails and two small hand rails aswell as the engine mount plate and winch frame, and thats not for the trailer you will see soon enough;) I will PM you Gazza, thanks. No problem mate. Take it easy with the speed of your drill, nice and slow with plenty of lube.... Pickling is done by brushing on with a 1/2" brush, wait a couple of minutes then scrub off with a wet green scotchbrite pad. It will come as a kit.... Link to comment Share on other sites More sharing options...
W+T Posted July 29, 2016 Author Report Share Posted July 29, 2016 No problem mate. Take it easy with the speed of your drill, nice and slow with plenty of lube.... Pickling is done by brushing on with a 1/2" brush, wait a couple of minutes then scrub off with a wet green scotchbrite pad. It will come as a kit.... I actually snapped the bits drilling mild steel, just to bloody heavy handed lol. And i got a pillar drill to kake life easy, cordless are good but only for certain jobs and i didnt want to bust it. Oh i took the naff drill sharpener back and got the jig type, works great. even better than i used to be able to be able to sharpen drill bits So pickling will bring back a mirror finish? if not just remembered that i have a small buffing kit some where to fit a drill. And another OH, i just measured up how much battens i will need for the frame work, i guestimated 45m make the 65m now. i am loosing the knack of DIY i think. Even worried about welding the rails and getting somebody to come and do it for me. Need to be good, but will practice a bi more yet. Link to comment Share on other sites More sharing options...
gazza Posted July 29, 2016 Report Share Posted July 29, 2016 Got your message mate Link to comment Share on other sites More sharing options...
WotEver Posted July 29, 2016 Report Share Posted July 29, 2016 Hi guys, first off, what a crock of you know what Wicks is, i thought BnQ was hard work, only got half what i went for, Anyway quick moan over. Totally agree. Wickes is a couple of miles from my house and B&Q is about 8 miles. 9 times out of 10 I won't even try to find what I want in Wickes 'cos I know they won't have it. There again, Screwfix is only a mile so that's by far my most regular store. I wanted some upholstery pins a couple of days ago - had to drive to B&Q. Link to comment Share on other sites More sharing options...
W+T Posted July 29, 2016 Author Report Share Posted July 29, 2016 Totally agree. Wickes is a couple of miles from my house and B&Q is about 8 miles. 9 times out of 10 I won't even try to find what I want in Wickes 'cos I know they won't have it. There again, Screwfix is only a mile so that's by far my most regular store. I wanted some upholstery pins a couple of days ago - had to drive to B&Q. I get a lot online now, think i will stay that way, easy but it takes days for it to arrive. Just plan ahead and it is fine. Pays to shop around anyway, But still get on my tits that a big DIY store are so bad at the smaller items, i wanted JG fittings from Wicks, very little about. Link to comment Share on other sites More sharing options...
Murflynn Posted July 29, 2016 Report Share Posted July 29, 2016 Totally agree. Wickes is a couple of miles from my house and B&Q is about 8 miles. 9 times out of 10 I won't even try to find what I want in Wickes 'cos I know they won't have it. There again, Screwfix is only a mile so that's by far my most regular store. I wanted some upholstery pins a couple of days ago - had to drive to B&Q. not really fair - Wickes is a builders' merchant and don't really cater for the average DIY-er. Any speciality items, like your upholstery pins, I try to plan ahead and buy on ebay. I'm doing a driveway project at home and I buy all my materials from Wickes because B&Q is just so impersonal and you need to walk miles to find anything. I agree with tools from Screwfix, unless I buy on ebay; bought a heavy concrete breaker a week ago, £90 delivered - did the job I wanted just fine. I was considering hiring, but the price would be about £70 for 2 days plus the cost of sharpening the points and the hassle of collecting from the shop. Link to comment Share on other sites More sharing options...
WotEver Posted July 29, 2016 Report Share Posted July 29, 2016 Yes, with some tools it simply makes no sense to hire. Wickes are marketing themselves as a DIY outlet these days - and as Screwfix competition with a Toolstation in many stores to boot. If I only want a small amount of building material I find B&Q very competitively priced if you have a trade card. Link to comment Share on other sites More sharing options...
cuthound Posted July 29, 2016 Report Share Posted July 29, 2016 My understanding is that B&Q own Screwfix and Wickes own Toolstation. Link to comment Share on other sites More sharing options...
gazza Posted July 29, 2016 Report Share Posted July 29, 2016 My understanding is that B&Q own Screwfix and Wickes own Toolstation. Nearly. Toolstaion and Wickes are owned by Travis Perkins, a fine Northampton company Link to comment Share on other sites More sharing options...
Ray T Posted July 29, 2016 Report Share Posted July 29, 2016 Sorry but found a wonderful DIY Store in Corwen where you can still buy one nut or bolt if required, instead of a packet of 10 as at B & Q etc. Link to comment Share on other sites More sharing options...
WotEver Posted July 29, 2016 Report Share Posted July 29, 2016 Nearly. Toolstaion and Wickes are owned by Travis Perkins, a fine Northampton company And B&Q and Screwfix are owned by Kingfisher. Sorry but found a wonderful DIY Store in Corwen where you can still buy one nut or bolt if required, instead of a packet of 10 as at B & Q etc. Green Lane Corwen.jpg Lovely ? Link to comment Share on other sites More sharing options...
RLWP Posted July 29, 2016 Report Share Posted July 29, 2016 Sorry but found a wonderful DIY Store in Corwen where you can still buy one nut or bolt if required, instead of a packet of 10 as at B & Q etc. Green Lane Corwen.jpg I have a local supplier who will do the same, in really, really odd sizes Richard Link to comment Share on other sites More sharing options...
bizzard Posted July 29, 2016 Report Share Posted July 29, 2016 I remember touring Cornwall years ago in a Rover 105 when the silencer rotted away and fell off near Falmouth. I had to visits 4 different shops for the bits. First shop to buy the silencer who sent me to old 'Jack the Nuts' shop up the road for 6 nuts and bolts for the flange connections, they sent me to old 'Bert Pellywhistles' shop down the road for a Junior hacksaw who sent me to old 'Glyn Pasties' shop round the corner for a tin of Gun Gum. It was nearly dark by the time I'd fixed the thing on in the gutter in Killigrew St. Link to comment Share on other sites More sharing options...
RLWP Posted July 29, 2016 Report Share Posted July 29, 2016 I remember touring Cornwall years ago in a Rover 105 when the silencer rotted away and fell off near Falmouth. I had to visits 4 different shops for the bits. First shop to buy the silencer who sent me to old 'Jack the Nuts' shop up the road for 6 nuts and bolts for the flange connections, they sent me to old 'Bert Pellywhistles' shop down the road for a Junior hacksaw who sent me to old 'Glyn Pasties' shop round the corner for a tin of Gun Gum. It was nearly dark by the time I'd fixed the thing on in the gutter in Killigrew St. My Father in Law had a 105. It is the only car I have seen with an adjustable gear lever I disliked driving it Richard Link to comment Share on other sites More sharing options...
bizzard Posted July 29, 2016 Report Share Posted July 29, 2016 My Father in Law had a 105. It is the only car I have seen with an adjustable gear lever I disliked driving it Richard Yes, smooth enough but very lumbery and heavy steering. They were the slightly quicker version of the Rover 90. Link to comment Share on other sites More sharing options...
RLWP Posted July 29, 2016 Report Share Posted July 29, 2016 It was the leaning out on corners I couldn't get used to. Otherwise a highly sophisticated motor car Richard Link to comment Share on other sites More sharing options...
bizzard Posted July 29, 2016 Report Share Posted July 29, 2016 It was the leaning out on corners I couldn't get used to. Otherwise a highly sophisticated motor car Richard Yes, they were heavy and a bit top heavy, crossply tyres didn't help but they would have been unsteerable on radials with no power steering. Strong old engines though the 6 cyl OHISE. very juicy though, but petrol was cheap then. Link to comment Share on other sites More sharing options...
Murflynn Posted July 30, 2016 Report Share Posted July 30, 2016 I remember touring Cornwall years ago in a Rover 105 when the silencer rotted away and fell off near Falmouth. sounds like it happened all of a sudden. must be the salty atmosphere Link to comment Share on other sites More sharing options...
W+T Posted July 30, 2016 Author Report Share Posted July 30, 2016 And we digress slightly lol Link to comment Share on other sites More sharing options...
WotEver Posted July 30, 2016 Report Share Posted July 30, 2016 And we digress slightly lol Can you tell we're bored awaiting your next photo instalment? Link to comment Share on other sites More sharing options...
W+T Posted July 30, 2016 Author Report Share Posted July 30, 2016 Can you tell we're bored awaiting your next photo instalment? Ok Ok, i am off to get some done while its nice, been busy spending all i have on it, so bare with and ILL BE BACK with pics Link to comment Share on other sites More sharing options...
W+T Posted July 31, 2016 Author Report Share Posted July 31, 2016 Here we go then, not much done again but looking betetr now, i reckon anyway, only as i am happy with it and not faffed about umming n arring about it. I got the screen out and set it in place so i could laminate it in place. I left it over night to set then cut the windows out A quick skim with GRP filler and nice and smooth, no need for gel coat, well the rest of the boat hasnt got much lol. I still need to fettle the other side but getting there. The canopy is next once this is done and will be narrowed a little now. I will need to redo the wiring, with the boat getting so warm the gaffer tape and perm foil tape i held it inplace with decided to detach itself so the most of the wiring has fell out the channels i routed into the insulation. Will not take long though and this time i will tape it inpalce just before i line out with ply. 1 Link to comment Share on other sites More sharing options...
W+T Posted August 8, 2016 Author Report Share Posted August 8, 2016 This is not an update as nothing has been achieved, but a few things have been learnt, no not to buy a clapped out boat and let it become an obsession but read on. I got onto finishing the screen frame which infact ok and worked all good, so i guess something was done after a bit of filling and smoothing out. Then came the canopy.top, to the point, dont ever use polyurethane foam sheets and remove the foil, reason this happens when open to sun light That happened after just 30 mins or so in the sun. Wasnt happy as i paid full wack for a sheet from Wicks when i can get it half price from a suppliers i found local to me. So i went and made it again from MDF and timber, but then the expanding foam i used as in pic would not set after 12hrs. Then that put me back a few days, then tonight i went to laminate it and then the whole surface would not take to the PVA Blue release agent......one was pulling ones hair out, what i had left anyway, that was saying it in readable terms that would not get reported to the mods on here.. Ok, bare with me, bare all if you like and i will be back as i mite just stat again this weekend when i can get some more insulation sheets. Just not remove the foil backing. IT WILL BE WORTH IT LUVIN IT really Link to comment Share on other sites More sharing options...
W+T Posted August 8, 2016 Author Report Share Posted August 8, 2016 The screen done and smooth as the first pint of Bow on a Friday night 1 Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now