markr1 Posted October 5, 2011 Report Share Posted October 5, 2011 does anyone know a good website for finding out about bolinder engines Link to comment Share on other sites More sharing options...
by'eck Posted October 5, 2011 Report Share Posted October 5, 2011 Heres some links I have Marine engine database Kevin Whittle I am sure there are others, but Kevin has written a couple of books The A to Z of Vintage Marine Engines and Vintage Engines for Narrow Boats which may help - see second link Link to comment Share on other sites More sharing options...
markr1 Posted October 5, 2011 Author Report Share Posted October 5, 2011 have you any idea what a bolinder type 1054 is worth roughly Link to comment Share on other sites More sharing options...
carlt Posted October 5, 2011 Report Share Posted October 5, 2011 You could try: Clicky Link to comment Share on other sites More sharing options...
Batavia Posted October 6, 2011 Report Share Posted October 6, 2011 (edited) have you any idea what a bolinder type 1054 is worth roughly There is only a niche market for these engines, largely influenced by the difficulty of finding spares for them. Consequently it is difficult to define a market price for them, especially as they can be purchased relatively cheaply in Europe. The answer therefore is probably "less than you might think/hope". Edited to add - The Bolinder Engines web site mentioned by carlt has some useful contact details. Chris G (owner of 2 x 1052s - more flexible than one 1054!) Edited October 6, 2011 by Batavia Link to comment Share on other sites More sharing options...
Timleech Posted October 6, 2011 Report Share Posted October 6, 2011 There is only a niche market for these engines, largely influenced by the difficulty of finding spares for them. Consequently it is difficult to define a market price for them, especially as they can be purchased relatively cheaply in Europe. The answer therefore is probably "less than you might think/hope". - especially for a 1054, which is seriously big for a narrow boat & AFAIK the nb market is the only real market for them in the UK. Tim Link to comment Share on other sites More sharing options...
MtB Posted October 6, 2011 Report Share Posted October 6, 2011 have you any idea what a bolinder type 1054 is worth roughly As I understand it the 1054 is a modern(ish) four cylinder engine nothing like the Bolinder singles from ex-working boats that have the distinctive sounding hit-and-miss governor. Its 46hp at 1500rpm according to the manual. I'd say the value is very dependant on the condition but four cylinder diesels are not fashionable or sought after, even if they have Bolinder written on the side! Re the value, does it run? How many hours since the last rebuild? If the answers are 'yes' and 'don't know' respectively, I'd hazard a total guess that you'd get about £1k for it, unless in a hurry to get rid, in which case halve that firgure. Mike Link to comment Share on other sites More sharing options...
Batavia Posted October 6, 2011 Report Share Posted October 6, 2011 As I understand it the 1054 is a modern(ish) four cylinder engine nothing like the Bolinder singles from ex-working boats that have the distinctive sounding hit-and-miss governor. Its 46hp at 1500rpm according to the manual. I'd say the value is very dependant on the condition but four cylinder diesels are not fashionable or sought after, even if they have Bolinder written on the side! Re the value, does it run? How many hours since the last rebuild? If the answers are 'yes' and 'don't know' respectively, I'd hazard a total guess that you'd get about £1k for it, unless in a hurry to get rid, in which case halve that firgure. Mike The 1050 series were designed in the late 1950s. I paid £800 for a running 1052 in Holland a few years ago. Bolinder's own gearbox on 1053/4s is a bit of a beast - huge and noisy. Most people who have rebuilt 1053/4s and 1113s in recent years have replaced them with PRMs, so the cost of doing that may need to be factored inot the value calculation. Unless a purchaser is going to spend a great deal on rebuilding the engine (and some spectacular rebuilds have been done recently in the Cassio area), then the best approach isprobably just to use it until something catastrophic goes wrong - and value it on that basis. Chris G Link to comment Share on other sites More sharing options...
BEngo Posted October 6, 2011 Report Share Posted October 6, 2011 have you any idea what a bolinder type 1054 is worth roughly How many hours has it done? Has it got a gearbox- if so what sort is it and what reduction ratio? What does it look like- immaculate, good, rusty, tatty? What does it run like? Then maybe we can give you a better idea. Not as popular as the 1052/3 or 1113 versions so not worth as much as these. N Link to comment Share on other sites More sharing options...
Speedwheel Posted October 6, 2011 Report Share Posted October 6, 2011 (edited) have you any idea what a bolinder type 1054 is worth roughly Nothing like as much as you probably think. (ETA Just repeated what Chris said! ) Pics? There was one someone was trying to sell for £14,000 a couple of years ago. Knock a 0 off the end and you are getting close. Edited October 6, 2011 by Speedwheel Link to comment Share on other sites More sharing options...
Batavia Posted October 6, 2011 Report Share Posted October 6, 2011 There was one someone was trying to sell for £14,000 a couple of years ago. Knock a 0 off the end and you are getting close. Mark, If you are planning to offer John P that (the figure with the nought knocked off) for the one he has just re-built, please let me know, so that I can get a grandstand seat! Chris Link to comment Share on other sites More sharing options...
Chris-B Posted October 6, 2011 Report Share Posted October 6, 2011 Mark, If you are planning to offer John P that (the figure with the nought knocked off) for the one he has just re-built, please let me know, so that I can get a grandstand seat! Chris I will bring the popcorn and beer for that Grumpy would live up to his nickname Chris-B Link to comment Share on other sites More sharing options...
Speedwheel Posted October 6, 2011 Report Share Posted October 6, 2011 Mark, If you are planning to offer John P that (the figure with the nought knocked off) for the one he has just re-built, please let me know, so that I can get a grandstand seat! Chris I'm selling tickets! Isn't he keeping that one? Link to comment Share on other sites More sharing options...
Chris-B Posted October 6, 2011 Report Share Posted October 6, 2011 I'm selling tickets! Isn't he keeping that one? I will take the refreshments franchise then Link to comment Share on other sites More sharing options...
XAlan W Posted October 6, 2011 Report Share Posted October 6, 2011 have you any idea what a bolinder type 1054 is worth roughly One sold recently taken from a boat in running order [ don`t know about condition with velvet drive 2/1 box]near tome on the river LOT[The guy had it up for 1,400 euro`s but I understand to make a sale he had to accept 600 `euro`s Link to comment Share on other sites More sharing options...
Batavia Posted October 6, 2011 Report Share Posted October 6, 2011 Isn't he keeping that one? Probably - but I just wanted to see what would happen! Chris Link to comment Share on other sites More sharing options...
Speedwheel Posted October 6, 2011 Report Share Posted October 6, 2011 have you any idea what a bolinder type 1054 is worth roughly I suppose we should also ask if you are buying or selling. Link to comment Share on other sites More sharing options...
Proper Job Posted October 6, 2011 Report Share Posted October 6, 2011 Ok............ markr1........ are you buying or selling? Sorry....... Couldn't help myself Some spec info on bolinders can be found here: link Link to comment Share on other sites More sharing options...
steamraiser2 Posted October 6, 2011 Report Share Posted October 6, 2011 Bolinder 1054 engines are not worth much at all. I was offered one for €500 a short while ago but the lack of parts and little commercial value put me off Link to comment Share on other sites More sharing options...
MtB Posted October 6, 2011 Report Share Posted October 6, 2011 What about the 1053s? I saw a riveted iron tug called Victoria (no not myaskin's Victoria) with a 1053 in it I believe, which sounded delightful for a three cyl engine. A few days later I bumped into John P in his immaculate Bolinder-powered josher and he spent quite a while explaining to me, totally unprompted, that a newly rebuilt one would cost £14k and why that should be the case. Hobby horses sprang to mind and somehow I got the feeling he might have one in build at the moment ;-) He could have saved his breath though as I fully understand already that ground-up rebuilds are expensive and I'm not in the market for one anyway. Even if I was, a 1054 has three too many cylinders... and the hot-bulb Kromhout on the market for a while now would be my first choice Might yet go for it if the Gleniffer continues to mess me about! I'm rambling now, I'll shut up. Nice chatting to John though, despite the grumpiness :-) Link to comment Share on other sites More sharing options...
Speedwheel Posted October 6, 2011 Report Share Posted October 6, 2011 I saw a riveted iron tug called Victoria (no not myaskin's Victoria) with a 1053 in it I believe, which sounded delightful for a three cyl engine. That's my dads. 1113 not 1053. Link to comment Share on other sites More sharing options...
Timleech Posted October 6, 2011 Report Share Posted October 6, 2011 (edited) What about the 1053s? I saw a riveted iron tug called Victoria (no not myaskin's Victoria) with a 1053 in it I believe, which sounded delightful for a three cyl engine. A few days later I bumped into John P in his immaculate Bolinder-powered josher and he spent quite a while explaining to me, totally unprompted, that a newly rebuilt one would cost £14k and why that should be the case. Hobby horses sprang to mind and somehow I got the feeling he might have one in build at the moment ;-) He could have saved his breath though as I fully understand already that ground-up rebuilds are expensive and I'm not in the market for one anyway. Even if I was, a 1054 has three too many cylinders... and the hot-bulb Kromhout on the market for a while now would be my first choice Might yet go for it if the Gleniffer continues to mess me about! I'm rambling now, I'll shut up. Nice chatting to John though, despite the grumpiness :-) Are they really that desirable, even in rebuilt state? Never seen them as very special myself, I know some others will disagree Yes there are aspects which make rebuilding (with minimal spares availability) an expensive business, not sure if I dare to ask 'why bother?' with anything bigger than the twin!! Yes a 1052 in good order does make a decent narrow boat engine, not sure about a 1054 though ?? Tim Edited October 6, 2011 by Timleech Link to comment Share on other sites More sharing options...
Pluto Posted October 6, 2011 Report Share Posted October 6, 2011 Are they really that desirable, even in rebuilt state? Never seen them as very special myself, I know some others will disagree Tim Now, if it was a Widdop..... Link to comment Share on other sites More sharing options...
Timleech Posted October 6, 2011 Report Share Posted October 6, 2011 Now, if it was a Widdop..... Absolutely. Always hankered after one. They do have much greater scarcity value, though Never forgiven Norman ??, who used to own the Bridgewater tug Ellesmere and had a yard by the canal at Worsley, for refusing to sell me a 21 hp single which lay rusting in his yard on the basis that I didn't know what I would be buying (I didn't, then, aged about 18). It was, of course, scrapped. Tim Link to comment Share on other sites More sharing options...
markr1 Posted October 6, 2011 Author Report Share Posted October 6, 2011 How many hours has it done? Has it got a gearbox- if so what sort is it and what reduction ratio? What does it look like- immaculate, good, rusty, tatty? What does it run like? Then maybe we can give you a better idea. Not as popular as the 1052/3 or 1113 versions so not worth as much as these. N not sure about the run time, it does have a gear box and i think its 2to1 its in good condition no rust and runs fine i have been offered one at what i thought was a good price but as i dont know a lot about them i just wanted to check i wasn't gona have my pants down Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now