jddevel Posted January 10, 2018 Report Share Posted January 10, 2018 Folding tiller arm. Are they a specialist item or available "off the shelf" please. If so any recommendations? Link to comment Share on other sites More sharing options...
Peter Reed Posted January 10, 2018 Report Share Posted January 10, 2018 Google is your friend. http://www.procastnotts.com/www.procastnotts.coms/info.php?p=24&pid=4090146&ack=9 Link to comment Share on other sites More sharing options...
Ray T Posted January 10, 2018 Report Share Posted January 10, 2018 (edited) You can safely use one knowing it has historical precedence. Or a wee bit less expensive: https://www.midlandchandlers.co.uk/store/product/at-004.aspx Edited January 10, 2018 by Ray T Link to comment Share on other sites More sharing options...
jddevel Posted January 11, 2018 Author Report Share Posted January 11, 2018 Thank you both. Sorted. Link to comment Share on other sites More sharing options...
CapitalD Posted April 11, 2018 Report Share Posted April 11, 2018 Does anyone know where to find a tiller hinge in stainless rather than brass? Pretty much everything else on the boat is chrome or stainless, so for the look of the thing, I'd prefer to avoid brass. I have searched the web and can't find any alternative material. Makes you wonder how many people make these things. Link to comment Share on other sites More sharing options...
Jen-in-Wellies Posted April 11, 2018 Report Share Posted April 11, 2018 1 hour ago, CapitalD said: Does anyone know where to find a tiller hinge in stainless rather than brass? Pretty much everything else on the boat is chrome or stainless, so for the look of the thing, I'd prefer to avoid brass. I have searched the web and can't find any alternative material. Makes you wonder how many people make these things. I have seen chrome plated brass ones. Some friends liked their folding tiller so much that when they sold the boat they kept it and mounted it on the living room wall of the house. Doubt there is more than one or two people making these at once. The market must be tiny. If not currently available you could buy a brass one, dismantle it and get it chrome plated. Jen Link to comment Share on other sites More sharing options...
Jen-in-Wellies Posted April 11, 2018 Report Share Posted April 11, 2018 Part number T007 stainless folding tiller. http://www.procastnotts.com/www.procastnotts.coms/info.php?p=25 Link to comment Share on other sites More sharing options...
zenataomm Posted April 11, 2018 Report Share Posted April 11, 2018 There are some girls involved in keeping the tradition alive. Click for details Link to comment Share on other sites More sharing options...
CapitalD Posted April 11, 2018 Report Share Posted April 11, 2018 1 hour ago, Jen-in-Wellies said: Part number T007 stainless folding tiller. http://www.procastnotts.com/www.procastnotts.coms/info.php?p=25 Yes, I found that one, but the hinge unit is brass. The good folk at P.R.O. Cast say that chrome plating would flake off pretty quickly, so they can't see the point. I have to say that I agree with that, Chrome plating on bits that rub gets quite manky. Link to comment Share on other sites More sharing options...
Markinaboat Posted April 11, 2018 Report Share Posted April 11, 2018 Do the hinges become loose over time, whereby you'd feel a slight wiggle when moving from side to side? Link to comment Share on other sites More sharing options...
WhiteSuit Posted April 11, 2018 Report Share Posted April 11, 2018 37 minutes ago, Markinaboat said: Do the hinges become loose over time, whereby you'd feel a slight wiggle when moving from side to side? Yes I have just taken two lump hammers to mine to reshape. I don't think it will last to long but feels tighter now. It also sags a bit and the threads for the screw have gone. Brass is a soft metal. Link to comment Share on other sites More sharing options...
Markinaboat Posted April 11, 2018 Report Share Posted April 11, 2018 1 minute ago, WhiteSuit said: Yes I have just taken two lump hammers to mine to reshape. I don't think it will last to long but feels tighter now. It also sags a bit and the threads for the screw have gone. Brass is a soft metal. How long did it last before loosening? Link to comment Share on other sites More sharing options...
WhiteSuit Posted April 11, 2018 Report Share Posted April 11, 2018 Honestly don't know it was with the boat when we bought it. I liked it but the wiggle got increasingly annoying then I started rapping my knuckles on he cabin top. Found a non folding one buried under the bed and swapped over about 3 years ago. I have just tried my repair so although it now feels tight it's not been used in anger yet. Link to comment Share on other sites More sharing options...
MtB Posted April 11, 2018 Report Share Posted April 11, 2018 1 hour ago, CapitalD said: The good folk at P.R.O. Cast say that chrome plating would flake off pretty quickly, so they can't see the point. I have to say that I agree with that, Chrome plating on bits that rub gets quite manky. Chrome plating correctly done does not 'flake off'. It might wear off though, or peel off if the underlying workpiece is bent or distorted after the plating is applied. Link to comment Share on other sites More sharing options...
Iain_S Posted April 11, 2018 Report Share Posted April 11, 2018 1 hour ago, WhiteSuit said: Honestly don't know it was with the boat when we bought it. I liked it but the wiggle got increasingly annoying then I started rapping my knuckles on he cabin top. Found a non folding one buried under the bed and swapped over about 3 years ago. I have just tried my repair so although it now feels tight it's not been used in anger yet. We have one that allowed the end of the tiller to foul the hatch coaming. My cure was drill the bearing surface of the hinge and put a screw in, which prevents the tiller going fully horizontal. Link to comment Share on other sites More sharing options...
CapitalD Posted April 12, 2018 Report Share Posted April 12, 2018 15 hours ago, Mike the Boilerman said: Chrome plating correctly done does not 'flake off'. It might wear off though, or peel off if the underlying workpiece is bent or distorted after the plating is applied. That may be true for a while, but my experience is that any scratch (or other imperfection) that allows water to get onto the base metal will cause corrosion and separation of the two metals. Basically it seems that the contact layer is a vulnerable area prone to breakdown. Link to comment Share on other sites More sharing options...
Markinaboat Posted April 12, 2018 Report Share Posted April 12, 2018 Thanks for the replies, I think I'll give it a miss! Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now