ditchy Posted March 29, 2016 Report Share Posted March 29, 2016 I know this is a long shot. Does any one have a spare sheet of glass 50 cm x 72 ish? I'm in the East Midlands. Willing to travel. Link to comment Share on other sites More sharing options...
dor Posted March 29, 2016 Report Share Posted March 29, 2016 What is it for? Really, all glass used on a boat should be at lest toughened, if not laminated. Link to comment Share on other sites More sharing options...
onionbargee Posted March 29, 2016 Report Share Posted March 29, 2016 Any glass supply trade counter will cut you any size while you wait. Bog standard glass is not expensive. Link to comment Share on other sites More sharing options...
RLWP Posted March 29, 2016 Report Share Posted March 29, 2016 Any glass supply trade counter will cut you any size while you wait. Bog standard glass is not expensive. Isn't bog standard glass all lumpy? Richard 3 Link to comment Share on other sites More sharing options...
Murflynn Posted March 29, 2016 Report Share Posted March 29, 2016 Isn't bog standard glass all lumpy? Richard only the public variety. Link to comment Share on other sites More sharing options...
ditchy Posted March 29, 2016 Author Report Share Posted March 29, 2016 What is it for? Really, all glass used on a boat should be at lest toughened, if not laminated. oh yeah. forgot to mention, its for a narrowboat and need to be toughened. Though Id ask here first as it might be quicker than getting some sent away to be toughened. Link to comment Share on other sites More sharing options...
sueb Posted March 29, 2016 Report Share Posted March 29, 2016 What is it for? Really, all glass used on a boat should be at lest toughened, if not laminated. Should it? We had the thinest possible on our front doors. If someone broke in they would cut themselves. Link to comment Share on other sites More sharing options...
Wanderer Vagabond Posted March 29, 2016 Report Share Posted March 29, 2016 Should it? We had the thinest possible on our front doors. If someone broke in they would cut themselves. Wont that work to your disadvantage is someone trips and falls against them? Link to comment Share on other sites More sharing options...
Murflynn Posted March 29, 2016 Report Share Posted March 29, 2016 Should it? We had the thinest possible on our front doors. If someone broke in they would cut themselves. I believe that installing plain non-toughened glass in a door is illegal according to building regs. Link to comment Share on other sites More sharing options...
Dyertribe Posted March 29, 2016 Report Share Posted March 29, 2016 oh yeah. forgot to mention, its for a narrowboat and need to be toughened. Though Id ask here first as it might be quicker than getting some sent away to be toughened. You can't cut toughened glass, you have to cut it then toughen it. Link to comment Share on other sites More sharing options...
Phil Ambrose Posted March 29, 2016 Report Share Posted March 29, 2016 You can't cut toughened glass, you have to cut it then toughen it.Beaten to it.Phil Link to comment Share on other sites More sharing options...
MtB Posted March 29, 2016 Report Share Posted March 29, 2016 You can't cut toughened glass, you have to cut it then toughen it. I can cut it into lots of random 5mm shapes.... Link to comment Share on other sites More sharing options...
rasputin Posted March 29, 2016 Report Share Posted March 29, 2016 I believe that installing plain non-toughened glass in a door is illegal according to building regs. Building regs, on a canal boat? Link to comment Share on other sites More sharing options...
chazzy Posted March 29, 2016 Report Share Posted March 29, 2016 Laminated glass would be OK can be taken from stock and cut to size as needed but is normally 6.5mm thick. Link to comment Share on other sites More sharing options...
DHutch Posted March 30, 2016 Report Share Posted March 30, 2016 Beaten to it. Ditto. Which is why half our wheelhouse is now laminated not toughened as it can be cut 'while you wait' where toughened can not. Most but not all frames will take 6mm glass. Plate glass on a narrowboat is maddness IMO, and as said, your not allowed it in the door of a house, in windows under a certain height (.9m?) , within I think half a metre of a doorway. Daniel Link to comment Share on other sites More sharing options...
Dyertribe Posted March 30, 2016 Report Share Posted March 30, 2016 I can cut it into lots of random 5mm shapes.... and then stick it onto a glass vase, grout it, call it a candle holder and sell for extortionate amounts in a craft fair...... Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now