BODs SR2 Posted September 22, 2023 Report Share Posted September 22, 2023 Does this anode need changing. Very rarely connected to shore power. Will it last another 2-3 years before the next blacking. Cheers. Link to comment Share on other sites More sharing options...
dmr Posted September 22, 2023 Report Share Posted September 22, 2023 Its hard to answer that as different boats appear to consume anodes at very different rates. Do you know when it was last replaced? Link to comment Share on other sites More sharing options...
matty40s Posted September 22, 2023 Report Share Posted September 22, 2023 That's 2/3 gone, I would add another about 2 feet away and leave that one to finish. Link to comment Share on other sites More sharing options...
blackrose Posted September 22, 2023 Report Share Posted September 22, 2023 1 hour ago, BODs SR2 said: Does this anode need changing. Very rarely connected to shore power. Will it last another 2-3 years before the next blacking. Cheers. It's not really a question of being connected to shore power or not. If you were connected to shore power then you should be properly isolated in which case your anodes wouldn't be doing anything other than their normal sacrificial rate of decay. To me that anode looks like it would last another few years. Give it a quick wire brush before the boat goes back in. Link to comment Share on other sites More sharing options...
BODs SR2 Posted September 23, 2023 Author Report Share Posted September 23, 2023 On 22/09/2023 at 11:03, dmr said: Its hard to answer that as different boats appear to consume anodes at very different rates. Do you know when it was last replaced? Been on about 8 years Link to comment Share on other sites More sharing options...
Chewbacka Posted September 23, 2023 Report Share Posted September 23, 2023 25 minutes ago, BODs SR2 said: Been on about 8 years So roughly a third every 4 years, probably last another 3 years or so - depending on who you moor next to etc. I would change it next time. Some may tell you they get less effective as they get smaller, but I suspect the opposite as all the pitting greatly increases the surface area to make them more effective. But I don’t suppose there is any real data to prove either view. Link to comment Share on other sites More sharing options...
Alan de Enfield Posted September 23, 2023 Report Share Posted September 23, 2023 1 minute ago, Chewbacka said: So roughly a third every 4 years, probably last another 3 years or so - depending on who you moor next to etc. I would change it next time. Some may tell you they get less effective as they get smaller, but I suspect the opposite as all the pitting greatly increases the surface area to make them more effective. But I don’t suppose there is any real data to prove either view. Do a Google search and you'll see that every article feature about anodes says they should be replaced when they are about 50% depleted, after that they lose effectiveness. Whilst you might thing they increase the surface area with the pitting, you will find that as it changes colour it becomes coated with a sort of 'rust' that, in effect coats the anode and stops it working. A boat which did not renew its anodes - this is after an estimated 18-24 months without protection. Link to comment Share on other sites More sharing options...
ditchcrawler Posted September 23, 2023 Report Share Posted September 23, 2023 7 minutes ago, Alan de Enfield said: Do a Google search and you'll see that every article feature about anodes says they should be replaced when they are about 50% depleted, after that they lose effectiveness. Whilst you might thing they increase the surface area with the pitting, you will find that as it changes colour it becomes coated with a sort of 'rust' that, in effect coats the anode and stops it working. A boat which did not renew its anodes - this is after an estimated 18-24 months without protection. Lot of dissimilar metals there, will a magnesium anode protect aluminium on a steel narrowboat ? Link to comment Share on other sites More sharing options...
Tracy D'arth Posted September 23, 2023 Report Share Posted September 23, 2023 I would just weld a new one next to the existing. There is a school of thought that on a fully epoxy coated hull and base plate the anodes have not much to do. They certainly last longer in that application. Zinc for salt water. Link to comment Share on other sites More sharing options...
Alan de Enfield Posted September 23, 2023 Report Share Posted September 23, 2023 (edited) 1 hour ago, ditchcrawler said: Lot of dissimilar metals there, will a magnesium anode protect aluminium on a steel narrowboat ? Yes as Magnesium is further along the scale and is less Noble (more active) than Aluminium. 45 minutes ago, Tracy D'arth said: Zinc for salt water. And Aluminium for 'brackish' water (tidal rivers, estuaries etc) Edited September 23, 2023 by Alan de Enfield Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now