Flocal Posted October 11, 2011 Report Share Posted October 11, 2011 Simple job? Link to comment Share on other sites More sharing options...
alan_fincher Posted October 11, 2011 Report Share Posted October 11, 2011 Simple job? Not at all, (or "dead easy" depending on your viewpoint!). A BMC 1.8 doesn't have a cam belt. Link to comment Share on other sites More sharing options...
FadeToScarlet Posted October 11, 2011 Report Share Posted October 11, 2011 It has a chain to drive the timing gear. Link to comment Share on other sites More sharing options...
Flocal Posted October 12, 2011 Author Report Share Posted October 12, 2011 Urghhhh a chain.. I havent got a clue the working hours of my engine.. another worry to ponder Link to comment Share on other sites More sharing options...
MtB Posted October 12, 2011 Report Share Posted October 12, 2011 Urghhhh a chain.. I havent got a clue the working hours of my engine.. another worry to ponder Not really. A cam chain needs no maintenance, unlike a cam belt. Except that it doesnt have a chain either IIRC. I think the cam is gear-driven on a BMC 1.8. No doubt someone will correct me on this in a sec! Link to comment Share on other sites More sharing options...
alan_fincher Posted October 12, 2011 Report Share Posted October 12, 2011 Except that it doesnt have a chain either IIRC. I think the cam is gear-driven on a BMC 1.8. No doubt someone will correct me on this in a sec! Happy to oblige! - It is chain driven! To the OP....... This is not something to have sleepless nights about! Just be happy with the knowledge you don't have a timing belt to worry about! Link to comment Share on other sites More sharing options...
Flocal Posted October 12, 2011 Author Report Share Posted October 12, 2011 Cheers Alan, i will sleep sound tonight ( more so as know i have some more ballast for the boat ) Link to comment Share on other sites More sharing options...
David Schweizer Posted October 12, 2011 Report Share Posted October 12, 2011 (edited) Cheers Alan, i will sleep sound tonight ( more so as know i have some more ballast for the boat ) Definitely a chain, see downloadable workshop manual here (page 21):- http://www.calcuttboats.com/pdfs/Workshop%20Manual%201.8.pdf Edited October 12, 2011 by David Schweizer Link to comment Share on other sites More sharing options...
Neil2 Posted October 12, 2011 Report Share Posted October 12, 2011 I think I read somewhere that there isn't a single recorded instance of a bmc diesel timing chain breaking. Link to comment Share on other sites More sharing options...
cereal tiller Posted October 12, 2011 Report Share Posted October 12, 2011 I think I read somewhere that there isn't a single recorded instance of a bmc diesel timing chain breaking. yes,they will clatter for a very long time when worn,a very worn chain can upset idling. it is usual for people to renew the chain when they get fed up with the noise! my BMC 2.5 developed a tick at tickover a 3 years ago,curiosity got the better of me,so i took the timing cover off. one of the timing chain silencer set screws had decided to loosen after 30 years of use,the locking tab had not been set properly from new. set it up with new locktab,started up engine,all sweet again. Link to comment Share on other sites More sharing options...
Speedwell Posted October 13, 2011 Report Share Posted October 13, 2011 Not really. A cam chain needs no maintenance, unlike a cam belt. Except that it doesnt have a chain either IIRC. I think the cam is gear-driven on a BMC 1.8. No doubt someone will correct me on this in a sec! It's the 1.5 that's gear driven Arthur Link to comment Share on other sites More sharing options...
Tony Brooks Posted October 17, 2011 Report Share Posted October 17, 2011 It's the 1.5 that's gear driven Arthur On a BMC 1.5 the CAMSHAFT is chain driven. The camshaft then drives the injector pump by a pair of skew gears. It is the extra lubrication that these skew gears require to drive the diesel pump that necessitates the oil jet and strainer located at the rear of the left hand side of the the engine below the manifold. If anyone has a 1.5 and is unsure about the past maintenance of the strainer and jet it would be a good idea to remove them for inspection and cleaning. I suspect wear in these gears goes some way to explain the BMCs reputation for smoking a bit. Link to comment Share on other sites More sharing options...
Carl123 Posted November 15, 2018 Report Share Posted November 15, 2018 On 17/10/2011 at 09:00, Tony Brooks said: On a BMC 1.5 the CAMSHAFT is chain driven. The camshaft then drives the injector pump by a pair of skew gears. It is the extra lubrication that these skew gears require to drive the diesel pump that necessitates the oil jet and strainer located at the rear of the left hand side of the the engine below the manifold. If anyone has a 1.5 and is unsure about the past maintenance of the strainer and jet it would be a good idea to remove them for inspection and cleaning. I suspect wear in these gears goes some way to explain the BMCs reputation for smoking a bit. BMC 1.8 diesel is a cam chain they changed to a belt when they went in to the new age engine Link to comment Share on other sites More sharing options...
cereal tiller Posted November 15, 2018 Report Share Posted November 15, 2018 9 minutes ago, Carl123 said: BMC 1.8 diesel is a cam chain they changed to a belt when they went in to the new age engine The Engine that the New Age travellers use? or the BMC Newage Engine Marinisation? Link to comment Share on other sites More sharing options...
Boater Sam Posted November 15, 2018 Report Share Posted November 15, 2018 (edited) I had a chain fail because it was so slack that it wrapped around the crankshaft sprocket. The tensioner and slipper have to be totally worn away for this to happen. The racket before they fail leaves you in no doubt that attention is required. Never seen a 1.5D chain drive fail The 1.8D chain is much longer than the 1.5D as it also drives the injection pump, the skew gears on the 1.5D pump drive get neglected, they should have the plugs and filters removed and cleaned regularly. Edited November 15, 2018 by Boater Sam added more Link to comment Share on other sites More sharing options...
Tony Brooks Posted November 16, 2018 Report Share Posted November 16, 2018 12 hours ago, cereal tiller said: The Engine that the New Age travellers use? or the BMC Newage Engine Marinisation? I think he is talking about the OHC diesel that Perkins flirted with, or designed, that the called the Prima Link to comment Share on other sites More sharing options...
Boater Sam Posted November 16, 2018 Report Share Posted November 16, 2018 (edited) The Montego engine? Prima diesel. Was an OK motor, some ally head problems and yes it is a rubber band engine. They didn't use it for long. Is the Rover diesel the same motor or is it a diesel "O" series? Later Rover version was the "L" series engine Edited November 16, 2018 by Boater Sam Link to comment Share on other sites More sharing options...
cereal tiller Posted November 16, 2018 Report Share Posted November 16, 2018 2 hours ago, Tony Brooks said: I think he is talking about the OHC diesel that Perkins flirted with, or designed, that the called the Prima 42 minutes ago, Boater Sam said: The Montego engine? Prima diesel. Was an OK motor, some ally head problems and yes it is a rubber band engine. They didn't use it for long. Is the Rover diesel the same motor or is it a diesel "O" series? Later Rover version was the "L" series engine That Engine (Montego)also appeared as the Volvo/Perkins 2002 ,not that popular have seen a couple and they did have a Cambelt. Link to comment Share on other sites More sharing options...
Stilllearning Posted November 16, 2018 Report Share Posted November 16, 2018 4 hours ago, Boater Sam said: The Montego engine? Prima diesel. Was an OK motor, some ally head problems and yes it is a rubber band engine. They didn't use it for long. Is the Rover diesel the same motor or is it a diesel "O" series? Later Rover version was the "L" series engine The Rover I had, and still miss, was the 620 SDi. It had the Honda engine, don’t know what it was called though, but it was lovely. Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now