Newtocanals1 Posted February 5, 2014 Report Share Posted February 5, 2014 I am looking getting a Bayliner 285 as a cabin cruiser. I know the beam is 10ft and it won't win prices for clearance. Would it still be able to do River Severn and Glouceser/Sharpness canal? I am also hoping it could dart down the Severn and join the Avon via Bristol. Am I right in thinking that the Avon has sufficient clearance/width&height to cater for such a gin palace? Link to comment Share on other sites More sharing options...
mattlad Posted February 5, 2014 Report Share Posted February 5, 2014 (edited) Yes, you'll be able to do The Severn as far as Stourport, and the Avon but I'm not sure if your air-draft is low enough to make it to Stratford. Edited February 5, 2014 by mattlad Link to comment Share on other sites More sharing options...
Newtocanals1 Posted February 5, 2014 Author Report Share Posted February 5, 2014 Thanks for the reply. I've seen Bridge 83 (Hungerford Station Road) on the Avon is quite low as well, with a height of 3.10/3.7m it could be tricky. Grateful for any extra advice. All new and very exciting but don't want to make a huge mistake...! Link to comment Share on other sites More sharing options...
Naughty Cal Posted February 6, 2014 Report Share Posted February 6, 2014 Thanks for the reply. I've seen Bridge 83 (Hungerford Station Road) on the Avon is quite low as well, with a height of 3.10/3.7m it could be tricky. Grateful for any extra advice. All new and very exciting but don't want to make a huge mistake...! If that is the true bridge height then a 285 will clear that as it is higher then the Lincoln bridges and 285's can squeeze under those. Link to comment Share on other sites More sharing options...
IanM Posted February 6, 2014 Report Share Posted February 6, 2014 Have we got our Avons mixed up in this topic? Link to comment Share on other sites More sharing options...
Naughty Cal Posted February 6, 2014 Report Share Posted February 6, 2014 (edited) . Edited February 6, 2014 by Naughty Cal Link to comment Share on other sites More sharing options...
BGA Posted February 6, 2014 Report Share Posted February 6, 2014 If that is the true bridge height then a 285 will clear that as it is higher then the Lincoln bridges and 285's can squeeze under those. Is the bridge low or the river high? Link to comment Share on other sites More sharing options...
Naughty Cal Posted February 6, 2014 Report Share Posted February 6, 2014 Is the bridge low or the river high? Bridges low, river not very deep Link to comment Share on other sites More sharing options...
Stilllearning Posted February 6, 2014 Report Share Posted February 6, 2014 River deep, mountain high? Link to comment Share on other sites More sharing options...
PaulG Posted February 6, 2014 Report Share Posted February 6, 2014 Yes, you'll be able to do The Severn as far as Stourport, and the Avon but I'm not sure if your air-draft is low enough to make it to Stratford. I think that is the wrong "Avon". But anyway, the air draught of the Bayliner 285 is 9ft 1in (according to this advert): http://www.rightboat.com/boats-for-sale/bayliner-285-cruiser-31896 It should be *just about* OK on the lower reaches of the Avon at normal water levels, where the bridge clearance is quoted 10ft minimum. I suspect the "pinch points" are probably King John's Bridge in Tewkesbury and Eckington Bridge. The bridge clearance on the Upper Avon is quoted as 8ft, so there's no chance of getting to Stratford. Not exactly sure offhand where the "pinch point" is on the upper river, but Binton is a good candidate, or possibly Bidford. Link to comment Share on other sites More sharing options...
Naughty Cal Posted February 6, 2014 Report Share Posted February 6, 2014 It's not a big job to chop the arch on these to gain more clearance. Link to comment Share on other sites More sharing options...
Graham Davis Posted February 6, 2014 Report Share Posted February 6, 2014 I doubt that something that big would get under Eckington Bridge on the WARWICKSHIRE Avon, but is the OP talking about the "Bath" Avon? Link to comment Share on other sites More sharing options...
Phil Ambrose Posted February 6, 2014 Report Share Posted February 6, 2014 It's not a big job to chop the arch on these to gain more clearance.Phylis is right, have seen this done more than oncePhil Link to comment Share on other sites More sharing options...
mattlad Posted February 6, 2014 Report Share Posted February 6, 2014 It's not a big job to chop the arch on these to gain more clearance. Or pump the water from under the boat!!! :-D :-D :-D Link to comment Share on other sites More sharing options...
BGA Posted February 7, 2014 Report Share Posted February 7, 2014 I doubt that something that big would get under Eckington Bridge on the WARWICKSHIRE Avon, but is the OP talking about the "Bath" Avon? Could fill the water and Poo tanks, (equivalent of letting air out of the tyres to get a vehicle under a road bridge. Link to comment Share on other sites More sharing options...
Naughty Cal Posted February 7, 2014 Report Share Posted February 7, 2014 Could fill the water and Poo tanks, (equivalent of letting air out of the tyres to get a vehicle under a road bridge. You do need to make sure you can get back though. A large flybridge went away for a week from Burton Waters. On the way out fully laden with water, fuel, food and booze they squeezed under the railway bridge at Saxilby. On the way back they didnt fit as the tanks were empty and the load lighter. Unfortunately for them they had to go back to Torksey to fill up with water as the waterpoint at Saxilby is the wrong side of the bridge for them. Link to comment Share on other sites More sharing options...
Newtocanals1 Posted February 7, 2014 Author Report Share Posted February 7, 2014 Many thanks for all of the feedback, we will try and find a Bayliner 285. If anyone is selling one near Gloucestershire or Bristol please let me know! Thanks, James Link to comment Share on other sites More sharing options...
blackrose Posted February 7, 2014 Report Share Posted February 7, 2014 I knew a bloke with a Bayliner when I was moored on the Thames. He told me some people called them "Binliners" on account of the fact that they didn't handle well. Still, it's all relative - perhaps he'd never moved a canal boat! Link to comment Share on other sites More sharing options...
Naughty Cal Posted February 7, 2014 Report Share Posted February 7, 2014 I knew a bloke with a Bayliner when I was moored on the Thames. He told me some people called them "Binliners" on account of the fact that they didn't handle well. Still, it's all relative - perhaps he'd never moved a canal boat! Folks in these parts refer to them as bin liners on account of their often questionable build quality! You can see they are built to a stricter budget than some other makers. That said there are enough if them around providing good service so they can't be all that bad. What is petrol availability like in your intended cruising area? You will be lucky to find a 285 with a Diesel engine. Link to comment Share on other sites More sharing options...
JV44 Posted February 7, 2014 Report Share Posted February 7, 2014 Folks in these parts refer to them as bin liners on account of their often questionable build quality! You can see they are built to a stricter budget than some other makers. That said there are enough if them around providing good service so they can't be all that bad. What is petrol availability like in your intended cruising area? You will be lucky to find a 285 with a Diesel engine. And if you find a Diesel one it will be up for a lot more dosh than the petrol one ,we looked at some 285 and 2855 bayliners before the Rinker but the slow speed handling was no where near as good . they are as I am sure the OP realises the about the biggest single leg cruiser out there so bang for buck sizewise a good choice ....as mentioned the build quality aint all that Link to comment Share on other sites More sharing options...
Newtocanals1 Posted February 8, 2014 Author Report Share Posted February 8, 2014 Thanks for all your comments. I have discovered my mooring won't have shore power, and the G&S canal ain't great for power access. To that end, is the Bayliner likely to be restricted to charging batteries whilst motoroing, and only then, for 12V devices? Trying to learn quickly! Link to comment Share on other sites More sharing options...
Naughty Cal Posted February 8, 2014 Report Share Posted February 8, 2014 More likely to be restricted by your cooking. They have electric stoves! Link to comment Share on other sites More sharing options...
Newtocanals1 Posted February 8, 2014 Author Report Share Posted February 8, 2014 Thanks, can I assume that I could get a 285 and use it reliably without the need to ever have shore power? Will hot water work if the engine is running? Thanks, Link to comment Share on other sites More sharing options...
JV44 Posted February 8, 2014 Report Share Posted February 8, 2014 (edited) We used our Honda suitcase genny for Charging batteries and cooking on the leccy stoves....those stoves aint up to much we had a little gas portable one for boiling a cuppa etc Edit cross posted the calorifier only works well when the engines being worked properly ie blastiung around at sea the internal coils are small and at slow speed it don`t warm water....or at least it didn`t in the rinker Steve Edited February 8, 2014 by JV44 Link to comment Share on other sites More sharing options...
Newtocanals1 Posted February 8, 2014 Author Report Share Posted February 8, 2014 Cheers. I have seen better value for boats being sold of of the US. Are there any issues with getting a used boat shipped to the UK? I assume insurance etc still all ok? Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now