Redeye Posted September 5, 2011 Report Share Posted September 5, 2011 Hi, This looks like it has just been posted on the Duck: Hope the link works I'm speechless! Link to comment Share on other sites More sharing options...
Timleech Posted September 5, 2011 Report Share Posted September 5, 2011 Hi, This looks like it has just been posted on the Duck: Hope the link works I'm speechless! That's just a piece which was cut out of the original boat to shorten it, with a new-ish counter and horrible (IMVHO) bow added. I think you'll find that the original boat has now been put back to its original length, I think there were some negotiations with the then owner of this craft to 'get the right piece back' but they came to naught. No doubt Mr Harrison will have chapter & verse on that Tim Link to comment Share on other sites More sharing options...
Athy Posted September 5, 2011 Report Share Posted September 5, 2011 As it has a new bow and stern and is only 33 feet long (though it looks longer in the photos) one does wonder how much Starling remains in it. Grandfather's axe? Link to comment Share on other sites More sharing options...
Josher Posted September 5, 2011 Report Share Posted September 5, 2011 I think you'll find that the original boat has now been put back to its original length More details here Link to comment Share on other sites More sharing options...
Speedwheel Posted September 5, 2011 Report Share Posted September 5, 2011 If you could get it for a song and put a nice bow and stern on it, you could have a nice boat with rounded chines (which I like). Link to comment Share on other sites More sharing options...
MoominPapa Posted September 5, 2011 Report Share Posted September 5, 2011 LOL re "pre-nuclear steel", which is only superior if you're making sensitive nuclear instrumentation, not narrowboats! MP. Link to comment Share on other sites More sharing options...
Gibbo Posted September 5, 2011 Report Share Posted September 5, 2011 The new bow looks like it was built by someone with no experience whatsoever of building bows. Skips perhaps, but not bows. Link to comment Share on other sites More sharing options...
alan_fincher Posted September 5, 2011 Report Share Posted September 5, 2011 I think to call that a 1936 Yarwoods boat is being what has in the past been called "economical with the truth". We will certainly not be swapping for our 1936 Yarwoods boat, even though that is known to contain a few new bits! For the record, here is the Starling that contains the more interesting bits! HNBOC Site Linky Link to comment Share on other sites More sharing options...
cereal tiller Posted September 5, 2011 Report Share Posted September 5, 2011 maybe it was built by MIKE YARWOOD,or some other comedian? 1 Link to comment Share on other sites More sharing options...
billh Posted September 6, 2011 Report Share Posted September 6, 2011 maybe it was built by MIKE YARWOOD,or some other comedian? It WAS owned by a comedian, about 12years ago it was out of the water on our slipway for leak investigation. There were holes at the Skip/Yarwoods interfaces which were "repaired" by the then owner. He soon sold it on at a premium based on its supposed historic boat status, I think to the chap who refused to sell the good bit to the owner of the rest of Starling. It seems to have been around a bit since, but not improved any. Bill Link to comment Share on other sites More sharing options...
JonL Posted September 6, 2011 Report Share Posted September 6, 2011 (edited) Should it not be called Starling A, similar to when people sell off parts of their garden and a new house is built on it. For me this seems such a messed about boat that it's provenance now seems nearly irrelevant Edited - for typo's - doh ! Edited September 6, 2011 by JonL Link to comment Share on other sites More sharing options...
pete harrison Posted September 6, 2011 Report Share Posted September 6, 2011 (edited) That's just a piece which was cut out of the original boat to shorten it, with a new-ish counter and horrible (IMVHO) bow added. I think you'll find that the original boat has now been put back to its original length, I think there were some negotiations with the then owner of this craft to 'get the right piece back' but they came to naught. No doubt Mr Harrison will have chapter & verse on that Tim I do have the chapter and verse on STARLING but I wont bore everybody with it here. To my mind this is a perfect example of what makes 'historic' boats interesting. STARLING is certainly not the only 'historic' narrow boat to have a section removed, but is one of the few where the centre section survives (the others being a couple of Small Woolwich motors, a Large Ricky butty, a 'Midlands & Coast' motor and a handful of B.C.N. day boats - off the top of my head). Personally I am glad that all 'historic' narrow boats are not preserved in the same way and that a few have a 'character' all of their own, even if they are not all to everybody's taste. For me this seems such a messed about boat that it's provenance now seems nearly irrelevant But I wonder how many 'enthusiasts' speculated to its original identity whilst it was named LOUISE JANE ? Quite a few I imagine. Edited September 6, 2011 by pete harrison Link to comment Share on other sites More sharing options...
alan_fincher Posted September 6, 2011 Report Share Posted September 6, 2011 STARLING is certainly not the only 'historic' narrow boat to have a section removed, but is one of the few where the centre section survives (the others being a couple of Small Woolwich motors, a Large Ricky butty and a 'Midlands & Coast' motor - off the top of my head). Any a "Middle Northwich" (former) butty that has bequeathed 10 foot of it's former length to re-lengthening a "Middle Northwich" motor ? Or so I have been led to believe ? Link to comment Share on other sites More sharing options...
pete harrison Posted September 6, 2011 Report Share Posted September 6, 2011 Any a "Middle Northwich" (former) butty that has bequeathed 10 foot of it's former length to re-lengthening a "Middle Northwich" motor ? Or so I have been led to believe ? Yes that is true, and I am sure if I spent some time thinking about it I could add several more. Again I will say that this is the sort of thing that makes 'historic' boats interesting. Link to comment Share on other sites More sharing options...
Speedwheel Posted September 8, 2011 Report Share Posted September 8, 2011 Relisted on eBay. Starting bid of £2,000. Link to comment Share on other sites More sharing options...
Redeye Posted September 10, 2011 Author Report Share Posted September 10, 2011 Hi Guys, The reason for the original post was that I actually think the centre section is quite interesting. My understanding is that there are relatively few examples of the rounded chine construction and to my knowledge only the C&C boats and the E Class boats were built using that method of construction. While I agree that the bow and stern details are interesting it is the underwater details comprising the swims and chine details that are often lost durin restoration or rebuiling as they may be perceived as being unimportant because the arn't seen. To put such a pig ugly bow and stern on an interesting example of construction still leaves me speechless. Cheers Redeye Link to comment Share on other sites More sharing options...
Chris Pink Posted September 10, 2011 Report Share Posted September 10, 2011 So what in your opinion were the benefits of round chines? One major disadvantage is a decrease in stability. The underwater nature of the bow section is beautiful and, for some reason has a 'secret' decorative bit where the two chines meet. Link to comment Share on other sites More sharing options...
Mike C Posted September 12, 2011 Report Share Posted September 12, 2011 So what in your opinion were the benefits of round chines? One major disadvantage is a decrease in stability. The advantages of rounded chines can be that when you ride up on the mud the boat tends to slide off, the rounded chines can make them tender rather than unstable. The reason for the original post was that I actually think the centre section is quite interesting. My understanding is that there are relatively few examples of the rounded chine construction and to my knowledge only the C&C boats and the E Class boats were built using that method of construction. While I agree that the bow and stern details are interesting it is the underwater details comprising the swims and chine details that are often lost durin restoration or rebuiling as they may be perceived as being unimportant because the arn't seen. To put such a pig ugly bow and stern on an interesting example of construction still leaves me speechless. The George and Mary also have rounded chines. The Centre section of the ‘Starling’ when called something like the ‘Louise’ or ‘Louise Jane’ was given the bow and stern a long time ago, I remember it on the moorings at or near Lymm in the 1970’s with each rivet painted in alternating colours of the boats colour scheme. While it may be less than beautiful it is much more interesting in every way that the masses of bland 57ft ‘Clone craft’ that are so popular and has probably been 'as is' for nearly half its life. Link to comment Share on other sites More sharing options...
mykaskin Posted September 15, 2011 Report Share Posted September 15, 2011 The George and Mary also have rounded chines. As do other Royalty boats. The rounded chines on a boat like this will make it roll worse than without, and with little other benefit due to its shallow draft and presumabably level trim in the water. Handy for rolling off the shallows however. Mike Link to comment Share on other sites More sharing options...
Speedwheel Posted September 18, 2011 Report Share Posted September 18, 2011 Well it went for £2k. Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now