spicemouse Posted August 5, 2021 Report Share Posted August 5, 2021 As title. I'm looking to switch from external padlocks to internal bolts. As I can't weld, my options are either coach bolts (not sure how the square section works with steel doors) or pop-rivets. As with most things on the boat, my initial ideas are often not the best and searching here has already yielded many opinions on this sort of thing. I don't expect anyone to tell me how exactly they secure their hatches, all I'm looking for is advice on the best way to secure latches to the inside of steel doors. Thanks! Link to comment Share on other sites More sharing options...
David Mack Posted August 5, 2021 Report Share Posted August 5, 2021 Pop rivets are very soft and easily drilled out. Bolts would be better. For coach bolts drill round holes then file them out square to take the square section under the bolt head. A pain of a job for which you will need a small square or triangular file. That way nobody can undo them from the outside (but you can from the inside), and the domed heads will look like rivets! 1 Link to comment Share on other sites More sharing options...
Tracy D'arth Posted August 5, 2021 Report Share Posted August 5, 2021 Dome head allen machine screws with nuts are neater and easier than coach bolts. Available in lots of sizes and gauges. Like these on ebay but engineers suppliers will stock. Stainless is nice, no need to paint! https://www.ebay.co.uk/itm/174774640276?_trkparms=ispr%3D1&hash=item28b1615e94:g:q2gAAOSwAIpgrj3V&amdata=enc%3AAQAGAAACkPYe5NmHp%2B2JMhMi7yxGiTJkPrKr5t53CooMSQt2orsSDAeS9EQtjPGVfKXTxF0%2BjpG2iWY5ohPQKW8Lw7w3NQJTAfG6a7O74yHtdRE%2FV9K%2FqoQZJoP3vEsm2AFsS2qOleKxEgA%2F%2FPnBdIhAO6mdSgzep4iVeO0hqcftxZMgbRHG%2BXNomKmtY9iz0VzreHl3Kh1iaGsVX0uYAcgbRLeLZM9aIZEAzinzk3H9%2B4M0Yjn7hAZlKeoDnO%2FOib08vZpUfqsTB3Y7go9ZaTfIVliOw2euwLBC%2F3wYS4TxFqlw4WJ2%2B%2FlZiC51P1V%2FmzORliPicdn%2F%2BXZ%2Fiu0qWhO904NZEAGdHNYRh1oATB2%2Blzcq%2FG9IMLDlFl28SZuB%2Bzw6PBkt8RZaETJw1NFZfXX8Ka6cNGSi4L3T4DMF7Sd42mUWtMTSsl2kSEFfuTHKgGX7JZuyfxDy6ua%2FS1kxTNcOlfZKawW62At6vKdnjCxm%2Bi0z3n9gwUfBwdJPMD9jTZwKfHHZuwlu%2BAL6hzTDiIOgCTBqo1tlvRms%2Fh27KXXo1WMW6NqZUvBpPg1i9ixfedXbMMDBvZCxHvJVY%2BC5enl2XdmVymOsCDULBfj9%2FxcTAU2qmAQPWpjvFMwl1%2BhJGh%2BqWjU2P6CREPHqAphR3x0t5%2FHxRZEI9Zj1bCEICr0WrVpdfl1Z%2BUyTEpKt6zhvd%2FIEuIYKXs2MWMeVkhZLttuim8zbEBLUjnttd%2BZHbYSGdpXtgoioNp0dFRI%2BqqTKPRJrR9npe%2BVpPmR4UigIcCa9TLw2TQ8fDcjf2u7hLurdJrj6ilPfD1m89FkCoJoLmtlYrABi2toncU2CgH5u9caHrAMLVtaaBB2%2B%2FiCAu3RKrlu2CuFV|ampid%3APL_CLK|clp%3A2334524 If the allen head is outside fill them with Araldite after tightening to render them difficult to remove. 1 Link to comment Share on other sites More sharing options...
Detling Posted August 5, 2021 Report Share Posted August 5, 2021 If use cross head countersunk bolts use a drill to round the cross head after fitting. Link to comment Share on other sites More sharing options...
ditchcrawler Posted August 5, 2021 Report Share Posted August 5, 2021 4 minutes ago, Detling said: If use cross head countersunk bolts use a drill to round the cross head after fitting. I went with the coach bolts, handy if you need to remove them for any reason Link to comment Share on other sites More sharing options...
spicemouse Posted August 5, 2021 Author Report Share Posted August 5, 2021 Think I'll go return the coach bolts. Got files, fitting, drills & impact driver.. shouldn't be too hard. Link to comment Share on other sites More sharing options...
FredDrift Posted August 5, 2021 Report Share Posted August 5, 2021 2 hours ago, Tracy D'arth said: Dome head allen machine screws with nuts are neater and easier than coach bolts. Available in lots of sizes and gauges. Like these on ebay but engineers suppliers will stock. Stainless is nice, no need to paint! https://www.ebay.co.uk/itm/174774640276?_trkparms=ispr%3D1&hash=item28b1615e94:g:q2gAAOSwAIpgrj3V&amdata=enc%3AAQAGAAACkPYe5NmHp%2B2JMhMi7yxGiTJkPrKr5t53CooMSQt2orsSDAeS9EQtjPGVfKXTxF0%2BjpG2iWY5ohPQKW8Lw7w3NQJTAfG6a7O74yHtdRE%2FV9K%2FqoQZJoP3vEsm2AFsS2qOleKxEgA%2F%2FPnBdIhAO6mdSgzep4iVeO0hqcftxZMgbRHG%2BXNomKmtY9iz0VzreHl3Kh1iaGsVX0uYAcgbRLeLZM9aIZEAzinzk3H9%2B4M0Yjn7hAZlKeoDnO%2FOib08vZpUfqsTB3Y7go9ZaTfIVliOw2euwLBC%2F3wYS4TxFqlw4WJ2%2B%2FlZiC51P1V%2FmzORliPicdn%2F%2BXZ%2Fiu0qWhO904NZEAGdHNYRh1oATB2%2Blzcq%2FG9IMLDlFl28SZuB%2Bzw6PBkt8RZaETJw1NFZfXX8Ka6cNGSi4L3T4DMF7Sd42mUWtMTSsl2kSEFfuTHKgGX7JZuyfxDy6ua%2FS1kxTNcOlfZKawW62At6vKdnjCxm%2Bi0z3n9gwUfBwdJPMD9jTZwKfHHZuwlu%2BAL6hzTDiIOgCTBqo1tlvRms%2Fh27KXXo1WMW6NqZUvBpPg1i9ixfedXbMMDBvZCxHvJVY%2BC5enl2XdmVymOsCDULBfj9%2FxcTAU2qmAQPWpjvFMwl1%2BhJGh%2BqWjU2P6CREPHqAphR3x0t5%2FHxRZEI9Zj1bCEICr0WrVpdfl1Z%2BUyTEpKt6zhvd%2FIEuIYKXs2MWMeVkhZLttuim8zbEBLUjnttd%2BZHbYSGdpXtgoioNp0dFRI%2BqqTKPRJrR9npe%2BVpPmR4UigIcCa9TLw2TQ8fDcjf2u7hLurdJrj6ilPfD1m89FkCoJoLmtlYrABi2toncU2CgH5u9caHrAMLVtaaBB2%2B%2FiCAu3RKrlu2CuFV|ampid%3APL_CLK|clp%3A2334524 If the allen head is outside fill them with Araldite after tightening to render them difficult to remove. Same theme but pin hex in a plethora of sizes… https://www.tcfixings.co.uk/product/m10-x-30mm-h6-pin-hex-a2-button-head-security-screws/13201 Link to comment Share on other sites More sharing options...
dmr Posted August 5, 2021 Report Share Posted August 5, 2021 Coach bolts are much more secure than button heads etc and look better. Making a round hole square is much quicker than it might sound. Coach bolts are available in black stainless which is rather nice. 1 Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now