Keeping Up Posted October 1, 2020 Report Share Posted October 1, 2020 Does anyone know whether the top part of Thermostatic Radiator Valves is standardised or not? Can the top part from one manufacturer simply screw on to the bottom part of one from another manufacturer as a simple replacement? One of mine still works fine as a valve (turn it fully one way and the radiator is fully on, turn it the other way and the radiator is off) but doesn't seem to function as a thermostat in any way. As it's almost 30 years old, a direct replacement seems unlikely although maybe the same manufacturer still exists if I can find a name anywhere on it. Simply exchanging the head would remove the need to drain and refill the system, so would be a lot easier. Link to comment Share on other sites More sharing options...
Hudds Lad Posted October 1, 2020 Report Share Posted October 1, 2020 we had an iffy one a few years back, BGas chap just unscrewed it and put on another from the back of his van, totally different manufacturer but same thread etc. Link to comment Share on other sites More sharing options...
Keeping Up Posted October 1, 2020 Author Report Share Posted October 1, 2020 2 minutes ago, Hudds Lad said: we had an iffy one a few years back, BGas chap just unscrewed it and put on another from the back of his van, totally different manufacturer but same thread etc. That's encouraging, thanks Link to comment Share on other sites More sharing options...
Guest Posted October 1, 2020 Report Share Posted October 1, 2020 2 minutes ago, Hudds Lad said: we had an iffy one a few years back, BGas chap just unscrewed it and put on another from the back of his van, totally different manufacturer but same thread etc. Same here. Our plumber changed one for us. but it wasn't thirty years old. (It's also possible to change a radiator valve without completely draining the system, but it's a bit of a faff). My late father in law once changed one for us doing this. There are some vids on You Tube. Link to comment Share on other sites More sharing options...
1st ade Posted October 1, 2020 Report Share Posted October 1, 2020 30 minutes ago, Keeping Up said: Does anyone know whether the top part of Thermostatic Radiator Valves is standardised or not? From experience - yes - but there are multiple "standards". I've swapped heads from one with the body of another without issues and had some which just don't mate. It's also worth noting that a mechanical fit is not the only issue - I've ended up with a working head but it's range is "hot" to "warm" and can't be set to "cool" or "frost" Link to comment Share on other sites More sharing options...
Ex Brummie Posted October 1, 2020 Report Share Posted October 1, 2020 There are a few generic valves with many different names, so an experienced techie will recognise this. Post a picture and I may be able to advise. Link to comment Share on other sites More sharing options...
Keeping Up Posted October 1, 2020 Author Report Share Posted October 1, 2020 Thanks. Unfortunately I can't get on board atm because the boat is in dock having blacking and paintwork done, so I can't post a picture yet. Encouraged by these responses I will buy a cheap one from Screwfix to take with me next week; if it fits & works that's Job Done, otherwise it's on a 30 day return. Link to comment Share on other sites More sharing options...
Cas446 Posted October 1, 2020 Report Share Posted October 1, 2020 (edited) 5 hours ago, Keeping Up said: Does anyone know whether the top part of Thermostatic Radiator Valves is standardised or not? Can the top part from one manufacturer simply screw on to the bottom part of one from another manufacturer as a simple replacement? Have a look at this pdf. Although written by Drayton it summarises all the types. https://wiser.draytoncontrols.co.uk/support/document/wiser-radiator-thermostat-adapter-guide Edited October 1, 2020 by Cas446 Duff link Link to comment Share on other sites More sharing options...
Keeping Up Posted October 1, 2020 Author Report Share Posted October 1, 2020 That's really useful, thanks Link to comment Share on other sites More sharing options...
Martin Nicholas Posted October 1, 2020 Report Share Posted October 1, 2020 Electronic ones are pretty good: https://ebay.us/dypVTl I have Honeywell ones, no longer available I believe. Link to comment Share on other sites More sharing options...
phantom_iv Posted October 1, 2020 Report Share Posted October 1, 2020 18 minutes ago, Martin Nicholas said: Electronic ones are pretty good: https://ebay.us/dypVTl I have Honeywell ones, no longer available I believe. I swapped an old Honeywell for a Drayton head just last night.... seems to work. I'm a little suspicious of the electronic ones as I had one that worked way too fast - the air around the radiator warmed up, electronic thermostat shut it down, leaving the rest of the room cold. I guess you could make it better with software, but not sure you achieve a huge amount over a mechanical one if you do. I solved the problem by linking the electronic one to an (expensive!) wall thermostat at the other side of the room, that controls the electronic one based on the temperature in the rest of the room. On the other hand, they might work quite well in a smaller space such as a boat! Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now