robtheplod Posted January 12, 2020 Report Share Posted January 12, 2020 Hi Everyone, we have a Bubble solid fuel stove, which works well. It has a 'flap' in it though which gets in the way of putting in coal - it can be lifted up and is just held by a screw at the back - is this required to be in the stove - does it serve a purpose or can I remove it? thanks!!! Link to comment Share on other sites More sharing options...
rusty69 Posted January 12, 2020 Report Share Posted January 12, 2020 (edited) Dunno, but it looks like a baffle plate to me. ETA.If it is a baffle plate, the stove will be more efficient if it left in place. Edited January 12, 2020 by rusty69 1 Link to comment Share on other sites More sharing options...
Tumshie Posted January 12, 2020 Report Share Posted January 12, 2020 (edited) It does look like it's the baffle plate and yes it's there for a reason, like Rusty says it's there to improve efficiency of the fire, you can take it out and see how it burns with out it if you really wanted but could you not find something to wedge while you put you coal in, like a stick of kindling or something of that shape? Edited January 12, 2020 by Tumshie 1 Link to comment Share on other sites More sharing options...
Parahandy Posted January 12, 2020 Report Share Posted January 12, 2020 (edited) Sorry wrong Model Edited January 12, 2020 by Parahandy 1 Link to comment Share on other sites More sharing options...
Tumshie Posted January 12, 2020 Report Share Posted January 12, 2020 Is that plate actually sitting in the right position in your fire? 1 Link to comment Share on other sites More sharing options...
robtheplod Posted January 12, 2020 Author Report Share Posted January 12, 2020 4 minutes ago, Tumshie said: Is that plate actually sitting in the right position in your fire? its where its always been...… it does get in the way and needs to be lifted. I've not had one of these before so assumed that was how its supposed to be. … does it seem low to you? Link to comment Share on other sites More sharing options...
rusty69 Posted January 12, 2020 Report Share Posted January 12, 2020 (edited) 16 minutes ago, Tumshie said: Is that plate actually sitting in the right position in your fire? 9 minutes ago, robtheplod said: its where its always been...… it does get in the way and needs to be lifted. I've not had one of these before so assumed that was how its supposed to be. … does it seem low to you? Dunno again, but looks too low to me. Hopefully someone who has one will be along shortly. The baffle plate on my squirrel is much higher than that. ETA.Lots of documentation on this site: https://www.harworthheating.co.uk/downloads/Technical/Bubble/Bubble User Info/ Edited January 12, 2020 by rusty69 1 Link to comment Share on other sites More sharing options...
Ex Brummie Posted January 12, 2020 Report Share Posted January 12, 2020 Looking at the pictures on the website, it would appear that this is a baffle that has fallen. Have good look inside and you'll probably see something broken/burnt out, that should support it in a position that clears the door. 1 Link to comment Share on other sites More sharing options...
Tumshie Posted January 12, 2020 Report Share Posted January 12, 2020 3 minutes ago, robtheplod said: its where its always been...… it does get in the way and needs to be lifted. I've not had one of these before so assumed that was how its supposed to be. … does it seem low to you? Have a look inside your stove and see if there is something on the sides of the stove walls that the plate might sit on or catch onto in some way. These photos aren't a bubble stove be they show what you might be looking for. 1 Link to comment Share on other sites More sharing options...
robtheplod Posted January 12, 2020 Author Report Share Posted January 12, 2020 Thanks everyone so much … its great its not supposed to be like this so will take a look next time on the boat and sort...... Link to comment Share on other sites More sharing options...
Parahandy Posted January 12, 2020 Report Share Posted January 12, 2020 http://www.bubbleproducts.co.uk/info-(corner-multi-fuel).html Link to comment Share on other sites More sharing options...
Tumshie Posted January 12, 2020 Report Share Posted January 12, 2020 The baffle plate is there to stop the fire being drawn up the chimney so it stays in the body of the stove and to heat that more efficiently so it should sit relatively high up in the stove where it can't interfere with the actual fire as it burns. Link to comment Share on other sites More sharing options...
ditchcrawler Posted January 12, 2020 Report Share Posted January 12, 2020 19 minutes ago, Tumshie said: Is that plate actually sitting in the right position in your fire? My thoughts as well but I can't find a manual online Link to comment Share on other sites More sharing options...
Tumshie Posted January 12, 2020 Report Share Posted January 12, 2020 Just now, ditchcrawler said: My thoughts as well but I can't find a manual online Me neither, the only bubble website I could find seems to be under construction so not much help. 4 minutes ago, robtheplod said: Thanks everyone so much … its great its not supposed to be like this so will take a look next time on the boat and sort...... Let us know how it goes ? Link to comment Share on other sites More sharing options...
Parahandy Posted January 12, 2020 Report Share Posted January 12, 2020 If you look carefully you can see the outline of the chimney on the fallen plate 1 Link to comment Share on other sites More sharing options...
rusty69 Posted January 12, 2020 Report Share Posted January 12, 2020 7 minutes ago, ditchcrawler said: My thoughts as well but I can't find a manual online 5 minutes ago, Tumshie said: Me neither, the only bubble website I could find seems to be under construction so not much help. Let us know how it goes ? https://www.harworthheating.co.uk/documents/Technical/Bubble/Bubble User Info/Bubble_Corner_Solid_Fuel-user_Instructions_Issue_8_Sept_2011.pdf 1 Link to comment Share on other sites More sharing options...
Tumshie Posted January 12, 2020 Report Share Posted January 12, 2020 1 minute ago, rusty69 said: https://www.harworthheating.co.uk/documents/Technical/Bubble/Bubble User Info/Bubble_Corner_Solid_Fuel-user_Instructions_Issue_8_Sept_2011.pdf Yeah I get that now, but I didn't see that you had edited your post to eloquently included all that info I was scrambling about trying to find and post further down the thread. 1 1 Link to comment Share on other sites More sharing options...
rusty69 Posted January 12, 2020 Report Share Posted January 12, 2020 4 minutes ago, Tumshie said: Yeah I get that now, but I didn't see that you had edited your post to eloquently included all that info I was scrambling about trying to find and post further down the thread. I am baffled! 1 Link to comment Share on other sites More sharing options...
robtheplod Posted January 12, 2020 Author Report Share Posted January 12, 2020 (edited) thanks for all your valued info … I followed the links and it gives a pic of the baffle - I don't recall seeing the bent bits of metal at the two sides - I'm fairly sure mine is just a flat sheet of metal so this would explain it not sitting correctly - maybe these rest on the side bricks? https://www.harworthheating.co.uk/product/bubble-b1c-baffle-plate-assembly-solid-fuel-stove/ Edited January 12, 2020 by robtheplod Link to comment Share on other sites More sharing options...
rusty69 Posted January 12, 2020 Report Share Posted January 12, 2020 1 minute ago, robtheplod said: thanks for all your valued info … I followed the links and it gives a pic of the baffle - I don't recall seeing the bent bits of metal at the two sides - I'm fairly sure mine is just a flat sheet of metal so this would explain it not sitting correctly: https://www.harworthheating.co.uk/product/bubble-b1c-baffle-plate-assembly-solid-fuel-stove/ That doesn't look exactly like your pic.The wrong one, or the tabs have fallen off? Link to comment Share on other sites More sharing options...
Parahandy Posted January 12, 2020 Report Share Posted January 12, 2020 2 minutes ago, robtheplod said: thanks for all your valued info … I followed the links and it gives a pic of the baffle - I don't recall seeing the bent bits of metal at the two sides - I'm fairly sure mine is just a flat sheet of metal so this would explain it not sitting correctly - maybe these rest on the side bricks? https://www.harworthheating.co.uk/product/bubble-b1c-baffle-plate-assembly-solid-fuel-stove/ Exactly that Rob Link to comment Share on other sites More sharing options...
matty40s Posted January 12, 2020 Report Share Posted January 12, 2020 (edited) 1 hour ago, robtheplod said: Hi Everyone, we have a Bubble solid fuel stove, which works well. It has a 'flap' in it though which gets in the way of putting in coal - it can be lifted up and is just held by a screw at the back - is this required to be in the stove - does it serve a purpose or can I remove it? thanks!!! This used to happen to the one I installed on Kathys old boat, the front edge is supposed to sit high up, not visible through the glass. It occasionally drops down, either by naughty coal insertion using the hod knocking it off, or just being a lackadaisibaffle. The metal is thin anyway - and will burn through in the centre eventually, Kathys tabs had fallen off but it still sat high most of the time. Edited January 12, 2020 by matty40s Link to comment Share on other sites More sharing options...
Tumshie Posted January 12, 2020 Report Share Posted January 12, 2020 It looks like there should be something at the front of the stove above the door that the plate should hook over. https://www.harworthheating.co.uk/product/corner-b1c-baffle-plate-solid-fuel-stove/ 2 minutes ago, matty40s said: or just being a lackadaisibaffle. ??? Link to comment Share on other sites More sharing options...
rusty69 Posted January 12, 2020 Report Share Posted January 12, 2020 (edited) 50 minutes ago, matty40s said: The metal is thin anyway - and will burn through in the centre eventually, Kathys tabs had fallen off but it still sat high most of the time It does look thin.I suspect the tabs have fallen off the OP's one and it has dropped. It would be worth looking inside the stove to see if the support brackets are still there before getting a replacement. The baffle plate in the squirrel is a big cast iron jobby. I wonder if a cast iron ones exists for the bubble stove? Eta, I bet you could bodge some tabs back onto that plate. Edited January 12, 2020 by rusty69 Link to comment Share on other sites More sharing options...
Parahandy Posted January 12, 2020 Report Share Posted January 12, 2020 7 minutes ago, rusty69 said: It does look thin.I suspect the tabs have fallen off the OP's one and it has dropped. It would be worth looking inside the stove to see if the support brackets are still there before getting a replacement. The baffle plate in the squirrel is a big cast iron jobby. I wonder if a cast iron ones exists for the bubble stove? I have known several People replace the Diesel Bubbles with Squirrels but the Multi Fuel Models are a competent enough Stove but youre right it does look very thin Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now