freddy
-
Posts
68 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Store
Everything posted by freddy
-
we have the above mentioned fridge,it seems not to want to work,the compresser which is a danfoss bd35f comes on,but the fridge doesn,t get cold,i have bypassed the thermostat but still no joy,any suggestions please,the fridge is 3 years old and we are on the boat every other week throughout the year,thank you john
-
This post cannot be displayed because it is in a forum which requires at least 10 posts to view.
-
hi,your 4+1&5+1do programmes 1 hourlater than 4&5 main channels are broadcast,hope this helps,john
-
goog luck,and relax and enjoy,john
-
hi,no contest,4 stroke all the way,had a dawncraft 25 for 5 years with a honda 9.9,never used full power cruising,otherwise would have been well over the normal cruise speed,very economical as well,2 strokes are better for rivers/sea where you can really open them up.hope this helps john
-
congrats,you must be so excited,enjoy.john
-
This post cannot be displayed because it is in a forum which requires at least 10 posts to view.
-
hi,first welcome,i don,t think anyone has said a very important bit of kit,hosepipe for filling up with water.john
-
the shroppie is shallow on the sides unless you are on official moorings,the shelf is where the sides have been built up do to subsidence,hence about a foot under water you have a concrete shelf which does'nt allow a peaceful nights sleep !most boats carry small wheel,s to put down the side,we use trailer wheel,s complete with tires.(tyres)
-
£200 a week at bw wigan.john ps must be the north v south thing !
-
have a look around hot water tank,mine is under the bed,the accumalator is next to it.john
-
thanks to catweasel for highlighting these plugs.
-
This post cannot be displayed because it is in a forum which requires at least 10 posts to view.
-
we have a big hasp and lack welded straight over the whole thing,it's 3 inch wide x 6inch length works well,so you don't have to drill the lip.
-
memories!!
-
oh,i had better read the destruction manual,i have both open at the same time!
-
hi,the dry mesh works very well,we had it for years in our motorhome,now on the boat,it works even better with slats instead of solid boards.john
-
hi,invest your money in solar panels,wind tubines tooo noisey,with hardley any output,john
-
hi,i agree with carl,go for the honda 2,and have it coverted to run on gas,runs quieter,just had my 2.6 honda done at edge technology.john
-
thanks for that info,i will give him a ring,what a great forum this is.
-
cheers for the info biggles/mrsmelly,the marine kit is 12 months old brand new,all for £732,have a sqirrell with back boiler,4 radiators,towel rail,just need to work out the plumbing to cali.thank you.
-
flea bay bargain,just like to thank mrsmelly for pointing this out,won today,will fit my 70' just right,cheers
-
had the same op a few years ago,the problems start when they take the stitches out i ended up with a heamorage? that needed cleaned and plugged everyday for a fortnight,had a plastic plate put in.!
-
This post cannot be displayed because it is in a forum which requires at least 10 posts to view.
-
Pre-purchase surveys on modern as in none historic boats
freddy replied to a topic in General Boating
yes we had a full survey done,