Jo_ Posted May 27, 2018 Report Share Posted May 27, 2018 30 minutes ago, Theo said: The thing that I immediately notice is that it is designed for only on size of spindle. I need to use my windlass on Hatton and the BCN. N Yes, true. And I noticed that the Fradley lock spindles are thin so the windlass does need to be pushed 'home'. But my other windlasses (both short and long throw) have one 'ole and so are also one size Link to comment Share on other sites More sharing options...
Guest Posted May 27, 2018 Report Share Posted May 27, 2018 I feel like these expensive windlasses are both solutions looking for a problem. My windlass cost me 25 quid, it's a rotating handle type which I thought was flash in itself. I haven't yet found a lock paddle it was unable to raise. 79 quid for a windlass? 150 quid?? They're 'avin' a larf! I'm sure they're well engineered but as I say, solutions looking for a problem. Link to comment Share on other sites More sharing options...
Jo_ Posted May 27, 2018 Report Share Posted May 27, 2018 3 minutes ago, welly said: I feel like these expensive windlasses are both solutions looking for a problem. My windlass cost me 25 quid, it's a rotating handle type which I thought was flash in itself. I haven't yet found a lock paddle it was unable to raise. 79 quid for a windlass? 150 quid?? They're 'avin' a larf! I'm sure they're well engineered but as I say, solutions looking for a problem. Yes, I know. But I do have a problem in that on stiff paddles I can't do 360 degrees and the ratchet 160 or whatever is perfect. Of course it's only right for those it's right for - bit like boats and engines! And mine will have a rotating handle because my engineering buddy is giving it one! ? Link to comment Share on other sites More sharing options...
Robbo Posted May 27, 2018 Report Share Posted May 27, 2018 (edited) 10 minutes ago, welly said: I feel like these expensive windlasses are both solutions looking for a problem. My windlass cost me 25 quid, it's a rotating handle type which I thought was flash in itself. I haven't yet found a lock paddle it was unable to raise. 79 quid for a windlass? 150 quid?? They're 'avin' a larf! I'm sure they're well engineered but as I say, solutions looking for a problem. Perhaps you don’t have the problem for what they provide the solution for? I have a lightweight aluminium windlass, I don’t have a problem with a normal windlass but it’s just nicer to use and for me that was worth the extra. Edited May 27, 2018 by Robbo Link to comment Share on other sites More sharing options...
Grassman Posted May 27, 2018 Report Share Posted May 27, 2018 Thanks for your valuable feedback Jo. We bought one today at Crick (£10 less than normal price) before I saw your thread. My wife loves working the locks but following major heart surgery last year she now struggles with them sometimes. Prior to that we would never have dreamed of buying one of these. I recognise that due to the normal length handle there will no advantage of extra leverage but the fact that she will be able to wind a few inches at a time rather than the struggle of winding it right round will I'm sure be of great benefit. We will be leaving Crick on Tuesday to continue down the GU to London so I will report back. Hopefully she will like it as much as Jo does. Link to comment Share on other sites More sharing options...
roggie Posted June 18, 2018 Author Report Share Posted June 18, 2018 Grassman, so how did your experience back down the GU with the windlass go? We will be heading the other way sometime this/next month. Link to comment Share on other sites More sharing options...
Grassman Posted June 18, 2018 Report Share Posted June 18, 2018 8 hours ago, roggie said: Grassman, so how did your experience back down the GU with the windlass go? We will be heading the other way sometime this/next month. We are now moored in London (Little Venice) so my wife has used it quite a lot since Crick. She loved it. She used it just as you would with any windlass then if she found one was a struggle to wind it all the way round she merely began to ratchet it up and down which was so easy. Granted it was a little slower raising a paddle but it was so much easier. When it came to lowering a paddle there's a fixed square next to it which she used. I'm not sure if it would fit the hydraulic type paddles further up the GU such as on the Hatton flight, but those aren't usually stiff and we would just use a normal windlass. Having been used to an aluminium one she got used to the extra weight and really it isn't much heavier than a normal steel one anyway. She wouldn't be without it now. Link to comment Share on other sites More sharing options...
Laurie Booth Posted June 18, 2018 Report Share Posted June 18, 2018 On 27/05/2018 at 22:48, Grassman said: Thanks for your valuable feedback Jo. We bought one today at Crick (£10 less than normal price) before I saw your thread. My wife loves working the locks but following major heart surgery last year she now struggles with them sometimes. Prior to that we would never have dreamed of buying one of these. I recognise that due to the normal length handle there will no advantage of extra leverage but the fact that she will be able to wind a few inches at a time rather than the struggle of winding it right round will I'm sure be of great benefit. We will be leaving Crick on Tuesday to continue down the GU to London so I will report back. Hopefully she will like it as much as Jo does. I've bought one as well. Link to comment Share on other sites More sharing options...
MtB Posted June 18, 2018 Report Share Posted June 18, 2018 13 minutes ago, Laurie.Booth said: I've bought one as well. For starting Ena??!! Link to comment Share on other sites More sharing options...
David Mack Posted June 19, 2018 Report Share Posted June 19, 2018 (edited) 11 hours ago, Grassman said: I'm not sure if it would fit the hydraulic type paddles further up the GU such as on the Hatton flight, The paddles on the Hatton flight are not hydraulic (except to the extent that all paddles could be regarded as hydraulic devices in that their function is to control the flow of water). Edited June 19, 2018 by David Mack 1 Link to comment Share on other sites More sharing options...
Grassman Posted June 19, 2018 Report Share Posted June 19, 2018 1 hour ago, David Mack said: The paddles on the Hatton flight are not hydraulic (except to the extent that all paddles could be regarded as hydraulic devices in that their function is to control the flow of water). Okay be picky then ?. What I meant was that they are different to most lock gear. I assumed they were hydraulic inside those 'drums' because the gear is enclosed and they don't go 'rat tat tat' like the others ?. Link to comment Share on other sites More sharing options...
Jo_ Posted June 19, 2018 Report Share Posted June 19, 2018 I am delighted with my GoWindlass. Will use it in preference to any other now since it makes my life with rough tough paddles easier! As Grassman says, using the ratchet so you don't have to go all the way round makes raising a paddle a slighly slower operation. But I'm not bothered - after all, as W.H.Davies wrote about 100 years ago: "A poor life this if, full of care, We have no time to stand and stare". Link to comment Share on other sites More sharing options...
Grassman Posted June 19, 2018 Report Share Posted June 19, 2018 10 minutes ago, Jo_ said: I am delighted with my GoWindlass. Will use it in preference to any other now since it makes my life with rough tough paddles easier! As Grassman says, using the ratchet so you don't have to go all the way round makes raising a paddle a slighly slower operation. But I'm not bothered - after all, as W.H.Davies wrote about 100 years ago: "A poor life this if, full of care, We have no time to stand and stare". But what she really likes about it is that if the paddle gear isn't stiff she can wind it all the way round just as you can with a normal windless. So it isn't always a slower process but only in some instances. Link to comment Share on other sites More sharing options...
roggie Posted June 19, 2018 Author Report Share Posted June 19, 2018 Thanks for the positive feedback, on the back of these I ordered one last night. Their website is slightly disappointing with very few testimonials, almost as thought no one has much positive to say. Guess they are more into design and production than marketing. Link to comment Share on other sites More sharing options...
Laurie Booth Posted June 19, 2018 Report Share Posted June 19, 2018 10 hours ago, Mike the Boilerman said: For starting Ena??!! ? Link to comment Share on other sites More sharing options...
MtB Posted June 19, 2018 Report Share Posted June 19, 2018 Just now, Laurie.Booth said: ? Oh dear did I get the name wrong? Your Rolls Royce! Link to comment Share on other sites More sharing options...
Laurie Booth Posted June 19, 2018 Report Share Posted June 19, 2018 2 minutes ago, Mike the Boilerman said: Oh dear did I get the name wrong? Your Rolls Royce! Yep, never get a girls name wrong Link to comment Share on other sites More sharing options...
MtB Posted June 19, 2018 Report Share Posted June 19, 2018 12 minutes ago, Laurie.Booth said: Yep, never get a girls name wrong Oh bugger. Very wise advice...! 1 Link to comment Share on other sites More sharing options...
roggie Posted July 18, 2018 Author Report Share Posted July 18, 2018 The GoWindlass was a success (said my wife). It was used on all the locks on the Grand Union south between Watford and Heyford Fields marina (Salar is in for blacking). Surprisingly it is only a couple of ounces heavier than the standard sleeved windlass - video of it in action on a Tweet I sent at Link to comment Share on other sites More sharing options...
Grassman Posted July 19, 2018 Report Share Posted July 19, 2018 My wife wouldn't be without hers now. We've been cruising for two months now and it's made such a difference for her. Link to comment Share on other sites More sharing options...
Jo_ Posted July 19, 2018 Report Share Posted July 19, 2018 (edited) 8 minutes ago, Grassman said: My wife wouldn't be without hers now. We've been cruising for two months now and it's made such a difference for her. Ditto. Love mine and delighted to hear it's not just me that thinks this windlass is a superb addition to boaty life ?? Edited July 19, 2018 by Jo_ Auto spell check ? Link to comment Share on other sites More sharing options...
haggis Posted July 19, 2018 Report Share Posted July 19, 2018 1 hour ago, Jo_ said: Ditto. Love mine and delighted to hear it's not just me that thinks this windlass is a superb addition to boaty life ?? I am finding this thread interesting as anything which makes my boating life easier is good. I currently use a long throw aluminium windlass (with jubilee clips so it can be retrieved if it goes swimming) and I find it really good and very light. On the odd occasions when I have to use a "normal" windlass (as the lock beam is too near the paddle) I find it very heavy and often just resort to putting my alu one on and off and doing three quarter turns with it. A Gowindlass would help with that! I wonder how the weight compares between the long throw alu and the Gowindlass. Does anyone know? haggis Link to comment Share on other sites More sharing options...
MtB Posted July 19, 2018 Report Share Posted July 19, 2018 36 minutes ago, haggis said: A Gowindlass would help with that! I wonder how the weight compares between the long throw alu and the Gowindlass. The GoWindlass is a lot heavier. Someone mentions earlier in the thread it weights a little bit more than the ordinary steel windlass you mention finding too heavy. Link to comment Share on other sites More sharing options...
haggis Posted July 19, 2018 Report Share Posted July 19, 2018 8 minutes ago, Mike the Boilerman said: The GoWindlass is a lot heavier. Someone mentions earlier in the thread it weights a little bit more than the ordinary steel windlass you mention finding too heavy. Thanks, Mike. Not for me then :-) haggis Link to comment Share on other sites More sharing options...
Jo_ Posted July 19, 2018 Report Share Posted July 19, 2018 I'll weigh mine and tell you! And you can compare it to the weight of your long throw! ? Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now