All Oaks Posted September 11, 2020 Report Share Posted September 11, 2020 (edited) Hi all I'm about to do a service on my Lister ST3C and would like all the help I can get with regards to oils etc. I've looked online but there does seem to be a difference of opinion as to what I should be using! Does anyone know of anywhere that specialises in Listers or does anyone have one of these engines and can advise me on what they have found to be suitable? As well as the oil change I'm looking to replace the oil filter and possibly the fuel filter (assuming they have one). The actual fuel line itself is nothing more than a length of copper pipe which I would like to upgrade to a more modern flexi if anyone has any ideas. Ian Edited September 11, 2020 by All Oaks Link to comment Share on other sites More sharing options...
bizzard Posted September 11, 2020 Report Share Posted September 11, 2020 13 minutes ago, All Oaks said: Hi all I'm about to do a service on my Lister SR3 and would like all the help I can get with regards to oils etc. I've looked online but there does seem to be a difference of opinion as to what I should be using! Does anyone know of anywhere that specialises in Listers or does anyone have one of these engines and can advise me on what they have found to be suitable? As well as the oil change I'm looking to replace the oil filter and possibly the fuel filter (assuming they have one). The actual fuel line itself is nothing more than a length of copper pipe which I would like to upgrade to a more modern flexi if anyone has any ideas. Ian 13 minutes ago, All Oaks said: Hi all I'm about to do a service on my Lister SR3 and would like all the help I can get with regards to oils etc. I've looked online but there does seem to be a difference of opinion as to what I should be using! Does anyone know of anywhere that specialises in Listers or does anyone have one of these engines and can advise me on what they have found to be suitable? As well as the oil change I'm looking to replace the oil filter and possibly the fuel filter (assuming they have one). The actual fuel line itself is nothing more than a length of copper pipe which I would like to upgrade to a more modern flexi if anyone has any ideas. Ian Filters normally used on those engines are. Oil- Fram PH2834, Crosland 547. Fuel- Fram C11931 PL or Crosland 489. Your engine should be solid mounted, you don't need to complicate things with a flexible fuel pipe, just a coil in the tubing before the lift pump to check vibration. These days any good 15/40 CC CF mineral engine oil. Used to be straight 30 sae oils, but the more modern 15/40 is better in my opinion. 1 Link to comment Share on other sites More sharing options...
All Oaks Posted September 11, 2020 Author Report Share Posted September 11, 2020 Hi I updated the original post. I double checked the engine plate and it is in fact an ST3C. Does this make any difference to the information you have given me? Ian Link to comment Share on other sites More sharing options...
bizzard Posted September 11, 2020 Report Share Posted September 11, 2020 5 minutes ago, All Oaks said: Hi I updated the original post. I double checked the engine plate and it is in fact an ST3C. Does this make any difference to the information you have given me? Ian Should be the same. Although folk do sometimes fit different fuel filter units, the one attached on the engine itself, quite a small unit, elements for it should only be about £4 or so. Filters can be bought online from either Filterama, or Inline Filters which have good cross referance charts. Later engine than the SR so 15/40 oil even better. Link to comment Share on other sites More sharing options...
All Oaks Posted September 11, 2020 Author Report Share Posted September 11, 2020 (edited) Thanks for the info. So you suggest I just replace the copper fuel pipe new for old? The old one has been trodden on a few times so a little flat in places! This would be restricting the fuel supply I assume? Edited September 11, 2020 by All Oaks Link to comment Share on other sites More sharing options...
bizzard Posted September 11, 2020 Report Share Posted September 11, 2020 2 minutes ago, All Oaks said: Thanks for the info. So you suggest I just replace the copper fuel pipe new for old? The old one has been trodden n a few times so a little flat in places! This would be restricting the fuel supply I assume? Yes, but double coil the tubing just before the lift pump. The old trodden on one should have it. Make sure you use annealed copper tubing or you might split it coiling it. Link to comment Share on other sites More sharing options...
All Oaks Posted September 11, 2020 Author Report Share Posted September 11, 2020 You'll have to excuse my ignorance but what exactly do you mean by double coil? Link to comment Share on other sites More sharing options...
David Mack Posted September 11, 2020 Report Share Posted September 11, 2020 Marine ST3 does not have an oil filter fitted as standard, whereas the industrial version does. Link to comment Share on other sites More sharing options...
All Oaks Posted September 11, 2020 Author Report Share Posted September 11, 2020 So the ST3C in my boat is unlikely to be the 'industrial version'? Link to comment Share on other sites More sharing options...
bizzard Posted September 11, 2020 Report Share Posted September 11, 2020 (edited) 14 minutes ago, All Oaks said: You'll have to excuse my ignorance but what exactly do you mean by double coil? Wrap the tubing around, say a log of wood a couple of times, about 6'' diameter. Do it once though, any over manipulating of the tubing will work harden it and will need heating to re. anneal-soften it again. 12 minutes ago, All Oaks said: So the ST3C in my boat is unlikely to be the 'industrial version'? Is likely to be ex industrial if it has an oil filter. My ST2 has one. Is there a spin on oil filter fitted to your engine. Would be on the port side near the fuel lift pump. Edited September 11, 2020 by bizzard Link to comment Share on other sites More sharing options...
All Oaks Posted September 11, 2020 Author Report Share Posted September 11, 2020 (edited) What is the idea behind coiling the fuel line? Also, do they have a gear box oil? Edited September 11, 2020 by All Oaks Link to comment Share on other sites More sharing options...
bizzard Posted September 11, 2020 Report Share Posted September 11, 2020 3 minutes ago, All Oaks said: What is the idea behind coiling the fuel line? Also, do they have a gear box oil? Vibration damping, helps to prevent the tube from ever splitting. they do have gearbox oil. Gear oil, sae 80/90 in either the Lister LM100 mechanical box or in the Hydraulic 150 box, same oil in the reduction box if you have one. Link to comment Share on other sites More sharing options...
Tony Brooks Posted September 11, 2020 Report Share Posted September 11, 2020 8 minutes ago, bizzard said: Vibration damping, helps to prevent the tube from ever splitting. they do have gearbox oil. Gear oil, sae 80/90 in either the Lister LM100 mechanical box or in the Hydraulic 150 box, same oil in the reduction box if you have one. Most likely a Lister box so as above but if its not a Lister box the oil could be anything. If you cant confirm its a Lister box post a photo Link to comment Share on other sites More sharing options...
bizzard Posted September 11, 2020 Report Share Posted September 11, 2020 8 minutes ago, Tony Brooks said: Most likely a Lister box so as above but if its not a Lister box the oil could be anything. If you cant confirm its a Lister box post a photo Yes indeed , I forgot that Tony, many of the ST's were fitted Hurth boxes after Lister stopped making the Lister boxes. Link to comment Share on other sites More sharing options...
All Oaks Posted September 11, 2020 Author Report Share Posted September 11, 2020 (edited) Okay, that make sense. She;s not been started in a while so are there any other tips you can put my way? previously she was quite a smoke free engine unless put in reverse for idling while moored up.and then she threw a bit of black smoke out. I've given her a new exhaust system (pipe work & silencer) as the previous one had as many holes a tea strainer!! I'll post some photos this afternoon for you to take a look at. Lastly, a big thank you to all who have replied even if it was from an empty pilchard tin!! Edited September 11, 2020 by All Oaks Link to comment Share on other sites More sharing options...
Tony Brooks Posted September 11, 2020 Report Share Posted September 11, 2020 1 minute ago, bizzard said: Yes indeed , I forgot that Tony, many of the ST's were fitted Hurth boxes after Lister stopped making the Lister boxes. I have even been asked about a Lister with what looked like a remote shaft driven machinery gearbox so once boats get on a bit its hard to know exactly what has been used. 1 minute ago, All Oaks said: Okay, that make sense. She;s not been started in a while so are there any other tips you can put my way? previously she was quite a smoke free engine unless put in reverse for idling while moored up.and then she threw a bit of black smoke out. I've given her a new exhaust system (pipe work & silencer) as the previous one had as many hole a tea strainer!! Are you on a river? CaRT won't like you running in gear when moored up. You should not be battery charging on idle for the first few hours. Its a direct injected engine and direct injected engines tend not to have the cleanest combustion at idle and low speed. Link to comment Share on other sites More sharing options...
ditchcrawler Posted September 11, 2020 Report Share Posted September 11, 2020 For oil I have just bought some Morris oil on ebay with free delivery and they gave a discount for bulk, I bought 5 5lt for less that Morris charge for 4. https://www.ebay.co.uk/itm/MORRIS-20W50-GOLDEN-FILM-CLASSIC-ENGINE-OIL-5-Litres/303674764612?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 Link to comment Share on other sites More sharing options...
All Oaks Posted September 11, 2020 Author Report Share Posted September 11, 2020 I have a permanent mooring on the GUC. I only used to run for charging battery but as I'm restoring her I'll be adding solar so the running for charge will be a thing of the past. She is a very basic boat so there will be no big demands on the electrics. Laptop and phone charge, extractor fan and shower pump, lights and maybe a 12v TV. I have a 300w panel waiting to go on and a good controller from Bimble Solar which should look after the starter battery and one leisure battery. Link to comment Share on other sites More sharing options...
David Mack Posted September 11, 2020 Report Share Posted September 11, 2020 1 hour ago, Tony Brooks said: Most likely a Lister box so as above but if its not a Lister box the oil could be anything. If you cant confirm its a Lister box post a photo My ST3 has had the original Lister gearbox replaced with a PRM hydraulic box. Link to comment Share on other sites More sharing options...
All Oaks Posted September 11, 2020 Author Report Share Posted September 11, 2020 Hi guys, here are a few pics of the ST3 And here's a couple more Link to comment Share on other sites More sharing options...
Tony Brooks Posted September 11, 2020 Report Share Posted September 11, 2020 I have no idea what that gearbox is, it looks very like the one I saw remote from a similar engine that I took to be a machinery gearbox of a lathe or some-such. I await with great interest to hear from others. I am sure its a mechanical gearbox with that stout leaver on the side. Link to comment Share on other sites More sharing options...
All Oaks Posted September 11, 2020 Author Report Share Posted September 11, 2020 What gearbox would you expect to see on such an engine? Either way I've had no problem with this one throughout the time the boat was up and running. Link to comment Share on other sites More sharing options...
Tony Brooks Posted September 11, 2020 Report Share Posted September 11, 2020 24 minutes ago, All Oaks said: What gearbox would you expect to see on such an engine? Either way I've had no problem with this one throughout the time the boat was up and running. Any one of a variety. Unless someone recognises the gearbox then I fear we will have no idea what oil should be used. We know there are four different ones - Lister LH150. Lister L100, Hurth, PRM. yours is none of these. You asked abut the correct oil for the gearbox. If the oil is fairly thin and redish its probably ATF/Dexron. If its like clean engine oil and of similar runnienes then its probably engine oil. If the colour is like clean engine oil but is far less runny then its probably EP 80 gear oil. Link to comment Share on other sites More sharing options...
All Oaks Posted September 11, 2020 Author Report Share Posted September 11, 2020 Of course, yes I see your point now, I did ask about gear box oil. I'm trawling through some Lister sites and yeah I see the gearboxes that you mention. Like you said hopefully someone will recognise the box so I can then find out what oil is suitable but I will make a note of what you have said and try and get a look tomorrow and report back with my findings. Link to comment Share on other sites More sharing options...
bizzard Posted September 11, 2020 Report Share Posted September 11, 2020 The fuel filter is different from the norm so my numbers will be wrong, could be a 296 see if there's any numbers on it. The oil filter looks ok so my numbers should be ok, but read numbers on it, looks lik a Mahl something or other. No idea what gearbox that is either. Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now