Frankieboy Posted February 9, 2011 Report Share Posted February 9, 2011 Evening all, After our recent discussion,I now know I want a 17 x 10 or 17 x 11 prop. I have a standard 1.5" stern tube with greaser, nowt fancy, and someone suggested I get an aquapoise prop, as it wont make a whining sound as much when running on tickover. Something to do with a thinner blade edge..... Is this right or should I go for the standdard prop, or is this a standard prop? Im all confused by it. Link to comment Share on other sites More sharing options...
MoominPapa Posted February 9, 2011 Report Share Posted February 9, 2011 Maybe you mean "equipoise"? Equipoise props. MP. Link to comment Share on other sites More sharing options...
Ark Right Posted February 9, 2011 Report Share Posted February 9, 2011 Evening all, After our recent discussion,I now know I want a 17 x 10 or 17 x 11 prop. I have a standard 1.5" stern tube with greaser, nowt fancy, and someone suggested I get an aquapoise prop, as it wont make a whining sound as much when running on tickover. Something to do with a thinner blade edge..... Is this right or should I go for the standdard prop, or is this a standard prop? Im all confused by it. Frankie what you want to do is listen to the people who spend the time and effort to reply to all your questions, when you start listening you will find all the answers are already there for you. Go back and look how many times you have asked the same question For example in this post about propellers.... go out and do us all a favour and buy yourself a Crowthers prop. I expect I'm going to get a load of shxte from this post, I will help any one, any where but Frankieboy you just don't listen mate. But fear not I am Open All Hours Off Topic Just where exactly do you buy the popcorn from on here ? 3 Link to comment Share on other sites More sharing options...
RLWP Posted February 9, 2011 Report Share Posted February 9, 2011 <snip> But fear not I am Open All Hours <snip> Your stammer doesn't show up on the forum Richard 1 Link to comment Share on other sites More sharing options...
Ark Right Posted February 9, 2011 Report Share Posted February 9, 2011 Your stammer doesn't show up on the forum Richard With very grateful thanks to Nurse Gladys Emmanuel Link to comment Share on other sites More sharing options...
PhilR Posted February 9, 2011 Report Share Posted February 9, 2011 Evening all, After our recent discussion,I now know I want a 17 x 10 or 17 x 11 prop. I have a standard 1.5" stern tube with greaser, nowt fancy, and someone suggested I get an aquapoise prop, as it wont make a whining sound as much when running on tickover. Something to do with a thinner blade edge..... Is this right or should I go for the standdard prop, or is this a standard prop? Im all confused by it. Equipoise props are normally fitted to high revving outboards and outdrives. Turbine props are usually fitted to narrowboats. I have never heard of anyone complaining of a whining sound at low revs with any type of prop. A thinner blade edge is likely to suffer from much more impact damage than a more robust turbine prop. Link to comment Share on other sites More sharing options...
bottle Posted February 10, 2011 Report Share Posted February 10, 2011 Frankie I have a 'bog standard' prop (Midland Chandlers) it does not make a noise at tick-over, it makes hardly any wash even at cruising speed. The boat goes forward and backwards if I need it to, forward planning means I very rarely use reverse (astern) in anger. An aside...... I see there is another miracle prop on the market that is claiming it can stop your boat quicker. Link to comment Share on other sites More sharing options...
bottle Posted February 10, 2011 Report Share Posted February 10, 2011 (edited) Edit: double posted Edited February 10, 2011 by bottle Link to comment Share on other sites More sharing options...
Timleech Posted February 10, 2011 Report Share Posted February 10, 2011 Equipoise props are normally fitted to high revving outboards and outdrives. Turbine props are usually fitted to narrowboats. I have never heard of anyone complaining of a whining sound at low revs with any type of prop. A thinner blade edge is likely to suffer from much more impact damage than a more robust turbine prop. Surely the shape doesn't determine the blade thickness, and either type can be made light or heavy duty? Tim Link to comment Share on other sites More sharing options...
Frankieboy Posted February 10, 2011 Author Report Share Posted February 10, 2011 Thanks all for you reply, Ill go for a standard one. Ark Right, Im sorry if it seems a bit repetitive, but bear in mind that once the boats in the water, the prop is on for good. When someone suggests something that I have not heard of then surely it makes sense to ask further info rather than just going on what they say. In this case it seems that an Equipoise prop wasnt for me so I was misinformed. If it makes you feel better, I'll go buy a prop today and then you can have some peace. Link to comment Share on other sites More sharing options...
RLWP Posted February 10, 2011 Report Share Posted February 10, 2011 <snip> as it wont make a whining sound as much when running on tickover. <snip> Are you sure that your thrust bearing is OK? Tawny Owl's used to make a noise before it seized up Richard Link to comment Share on other sites More sharing options...
Frankieboy Posted February 10, 2011 Author Report Share Posted February 10, 2011 Thrust bearing should be ok, its all new and hasnt run yet. Was only responding as someone had said about equipoise removing a small whining sound. It seems after all its irrelevant. I'll prob not know of any issues such as that till its on the water, but was just looking into what this equipoise prop was as someone had sung its praises. Link to comment Share on other sites More sharing options...
Timleech Posted February 10, 2011 Report Share Posted February 10, 2011 Thanks all for you reply, Ill go for a standard one. Ark Right, Im sorry if it seems a bit repetitive, but bear in mind that once the boats in the water, the prop is on for good. When someone suggests something that I have not heard of then surely it makes sense to ask further info rather than just going on what they say. In this case it seems that an Equipoise prop wasnt for me so I was misinformed. If it makes you feel better, I'll go buy a prop today and then you can have some peace. You may be confusing different bits of advice. Some props do 'sing', not especially at tickover though. This is sometimes solved by 'sharpening' the blade edge, but this is generally AIUI more beneficial on the trailing edge which is only vulnerable when going astern. I've no idea whether equipoise props are more or less prone to 'singing' than the standard 'Turbine' type. What they do generally have is a slightly larger blade area, so you may be able to use a slightly smaller diameter which can be an advantage with some installations. There are other shapes as well, before even thinking about novel types such as Axiom, but all are likely to be more expensive than the basic turbine. Tim Link to comment Share on other sites More sharing options...
bottle Posted February 10, 2011 Report Share Posted February 10, 2011 the prop is on for good. Well hopefully but you will have the opportunity to change it every two years when you have the boat blacked. Link to comment Share on other sites More sharing options...
Frankieboy Posted February 10, 2011 Author Report Share Posted February 10, 2011 Well hopefully but you will have the opportunity to change it every two years when you have the boat blacked. Sorry, what I meant was, once the boats in the water, whatever prop is on will be there until next blacking day. Link to comment Share on other sites More sharing options...
bottle Posted February 10, 2011 Report Share Posted February 10, 2011 Frankie I know, that you know, that I know you meant that, just a bit of leg pulling. I know think. Link to comment Share on other sites More sharing options...
Albion Posted February 10, 2011 Report Share Posted February 10, 2011 You may be confusing different bits of advice. Some props do 'sing', not especially at tickover though. This is sometimes solved by 'sharpening' the blade edge, but this is generally AIUI more beneficial on the trailing edge which is only vulnerable when going astern. I've no idea whether equipoise props are more or less prone to 'singing' than the standard 'Turbine' type. What they do generally have is a slightly larger blade area, so you may be able to use a slightly smaller diameter which can be an advantage with some installations. There are other shapes as well, before even thinking about novel types such as Axiom, but all are likely to be more expensive than the basic turbine. Tim They do indeed. Usually this is slightly above tickover and sounds like grit in a bearing (scratchy sort of sound). Slight alteration of the revs up or down usually stop it. It can be a bit irritating as sod's law dictates that it will happen at exactly the revs you wish to cruise at. I've been involved in grinding prop blades to cure it but, other than knowing where and how to grind, it still is a bit hit and miss, like a lot to do with props. Jooren (Dutch) props, from whom I sourced Phoenix's 24 x 17, come ready ground to prevent singing. Roger Link to comment Share on other sites More sharing options...
Frankieboy Posted February 10, 2011 Author Report Share Posted February 10, 2011 Frankie I know, that you know, that I know you meant that, just a bit of leg pulling. I know think. I know that you know that I know hat you know that I meant that. Bet you cant say that after a few pints. Link to comment Share on other sites More sharing options...
bottle Posted February 11, 2011 Report Share Posted February 11, 2011 I could not even say it sober, had enough trouble typing it. Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now