Nuts!!!

[alvicchas1]

Greetings All,

 

Connecting and disconnecting and connecting the leads from engine glow plugs is a fiddly job. I seem to drop the connection nuts into places where I cannot retrieve them. The plugs are Champion CH32. The threaded part is about 4mm diameter. A tall order but would anybody know the size and thread form of the nuts.Champion is now owned by Federal-Mogul in America and I have not been able to access any technical info.

 

Thanks

 

Vic

[Sir Nibble]

The threaded part is about 4mm diameter. Thanks

 

Vic

They are 4mm nuts!

[alvicchas1]

They are 4mm nuts!

 

Thanks, but are they a metric thread?

[RLWP]

Thanks, but are they a metric thread?

 

A 4mm nut is a nut that fits onto a 4mm metric thread

 

Richard

[sharpness]

Thanks, but are they a metric thread?

 

Yes they are, if you cant find any, PM me an address & I'll post you some, we've got hundreds at work.

 

Steve

[Steve Goddard]

They could also be 4BA which are 3.6 mm major dia

[WotEver]

They could also be 4BA which are 3.6 mm major dia

But they're not, because they're M4.

 

Tony

[Sir Nibble]

Lordy! How complex can it get?

They are 4mm nuts with a thread pitch of 0.7mm, spanner size is 7mm. Standard ordinary any hardware shop M4 nuts.

[RLWP]

Lordy! How complex can it get?

They are 4mm nuts with a thread pitch of 0.7mm, spanner size is 7mm. Standard ordinary any hardware shop M4 nuts.

 

What finish do they have?

[Gibbo]

They are 4mm nuts with a thread pitch of 0.7mm, spanner size is 7mm.

 

Rubbish. This is the correct size.

 

[WotEver]

What finish do they have?

Is it okay to mix Cad Pass with Zinc?

 

Tony

[RLWP]

Is it okay to mix Cad Pass with Zinc?

 

Tony

 

Just don't cut yourself

 

Richard