Bolinder exhaust roof collar

[Jrtm]

Might be a bit of an odd request but i need a bolinder roof collar if its not from a bolinder i need it to be the same as i already have 3 stacks that fit a bolinder on!

 

If all goes to plan and i can get the work done to a boat at a reasonable cost i want to convert it back to having a semi diesel exhaust (well to the eye anyways abit like lamprey)

[X Alan W]

Might be a bit of an odd request but i need a bolinder roof collar if its not from a bolinder i need it to be the same as i already have 3 stacks that fit a bolinder on!

 

If all goes to plan and i can get the work done to a boat at a reasonable cost i want to convert it back to having a semi diesel exhaust (well to the eye anyways abit like lamprey)

Back in the day IIRC My Seffle & i guess you mean the semi diesel Bolinder used the same collar as the back cabin range & the exhaust pipes were the same diameter as the stove chimney in fact I used cabin chimney pipes for the exhaust

[Jrtm]

Bolinder one is a 4.75 inch outside tapered diameter with a small ring around it to that bolts to the roof using 4 bolts. Most chimney ones even the smaller ones are like a big ovel plate with 2 bolt to hold it down

[dave moore]

I may know someone with a collar but it will be a few days before I'm in touch.

 

Cheers

 

Dave

[X Alan W]

Bolinder one is a 4.75 inch outside tapered diameter with a small ring around it to that bolts to the roof using 4 bolts. Most chimney ones even the smaller ones are like a big ovel plate with 2 bolt to hold it down

The fixing plate on the one I had was cut to make it a ring the width of the narrowest part of the flange & had 4 holes drilled & then filed square to accept coach bolts

[dave moore]

Sorry...

 

I drew a blank yesterday with the collar, I thought there may have been one lurking somewhere, apparently not.

 

Dave

[Speedwheel]

Where the the same size for 9 and 15 horse?

What boat is it for?

[Jrtm]

At the moment its not for a boat its so i can finish building the new riveted stacks for peacock and a few sets of short brass ones made from artillery shells i know they fit but to make them i need to keep taking them on and off then doing a few rivets and fitting ect. I then need it to know how many brass ones i can make from each shell think last time i got away with 2 as one just had a thicker wall than the other.

 

After that unless the boat i have dosnt have a bolinder coller it will go onto that to put it back to having one on. If it already has one ill give it back to who ever i got/bought it from

I will then pos build a few more and sell them off cheap to cover the materials

[Jrtm]

My only other option is to use my stack and make mold for it to fit then use that. On the other hand i can always use my stack to try diffrent collars to see if any fit my only worry is peacocks will be diffrent as thats an original.

[Jrtm]

Now have one! Wooo