Detling Posted December 15, 2013 Report Share Posted December 15, 2013 I want to have a relay that switches on when the engine is running and off when the engine is stopped, a bit like the ignition on wiring in a car. This is so that items that should be off, when the engine is off, automatically stop and I can't leave them on and flatten the battery. It is an Isuzu diesel engine with a 4 position start switch but I cannot get at the rear of the switch. is there anywhere on the engine I can connect to ? Link to comment Share on other sites More sharing options...
Keeping Up Posted December 15, 2013 Report Share Posted December 15, 2013 If the alternator has a "D" terminal, that should do it. It's the same terminal that connects to the warning light bulb and is often used to drive a split-charge relay. Link to comment Share on other sites More sharing options...
RLWP Posted December 15, 2013 Report Share Posted December 15, 2013 Another possibility might be the feed to the stop solenoid on the fuel pump Richard Link to comment Share on other sites More sharing options...
by'eck Posted December 15, 2013 Report Share Posted December 15, 2013 And yet another possibility is wiring a relay such that it receives its negative coil feed from the oil pressure switch. Link to comment Share on other sites More sharing options...
Detling Posted December 15, 2013 Author Report Share Posted December 15, 2013 Wow so many choices I thought it would be difficult, just got to find them now. Thanks Link to comment Share on other sites More sharing options...
Nickhlx Posted December 15, 2013 Report Share Posted December 15, 2013 .. or a voltage sensitive relay that closes when the voltage exceeds say 13.9 volts ? Nick Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now