Plumbing Parts Help

[Biggles]

Can someone please tell me what to order from the screwfix catalog to connect 22mm copper to the coils on a copper cylinder.

 

Cheers

 

Biggles

[Ark Right]

Can someone please tell me what to order from the screwfix catalog to connect 22mm copper to the coils on a copper cylinder.

 

Cheers

 

Biggles

I hope this is non boat related

If it then In would be more than happy to point you in the right direction

[springy]

Depends on the size of the fittings on the coil - they are probably either 1" BSP male - in which case you could use

http://www.screwfix.com/prods/50777/Plumbing/Compression-Fittings/Flowflex-Female-Coupler-22mm-x-1

or

http://www.screwfix.com/prods/96133/Plumbing/Compression-Fittings/Flowflex-Female-Coupler-28mm-x-1 with

a 28-22 reducing bush

Or they may be 3/4" BSP male in which case you could use

http://www.screwfix.com/prods/81402/Plumbing/Compression-Fittings/Flowflex-Female-Coupler-22mm-x

 

elbows are also available and screwfix list several brands - prices vary & I can't comment on quality

 

springy

[david and julie]

Personally I'd go for the union type.

http://www.plumbcall...nder-Unions.htm

[Strads]

mine were 22mm and i used compresion joints on one pair and have hep ones on the other (as installed) and they fecking awkward to undo / and will if i have to "remove" work on the calorifier again be changed for compresion joints..as i can get "leverage" on these to tighten - undo when needed......