Neil2 Posted July 6, 2019 Report Share Posted July 6, 2019 What wood glue do people like? It's for marine ply specifically. No doubt the question has been asked before but there's always new stuff coming on the market. Link to comment Share on other sites More sharing options...
WotEver Posted July 6, 2019 Report Share Posted July 6, 2019 Titebond, Cascamite, or a PU depending on application. Link to comment Share on other sites More sharing options...
Chewbacka Posted July 6, 2019 Report Share Posted July 6, 2019 Waterproof PVA where any surplus is visible as it dries clear, for everything else (especially joins which are not as tight as they should be) I use pu. Don’t get it on your hands as you have to wait for it to wear away. It is good stuff. Link to comment Share on other sites More sharing options...
pete.i Posted July 6, 2019 Report Share Posted July 6, 2019 You found proper marine ply?? Anyway Cascamite. Link to comment Share on other sites More sharing options...
Ryeland Posted July 6, 2019 Report Share Posted July 6, 2019 Depends what you are trying to do! For fitting out, I found the 5 and 30 minute polyurethane adhesives very good as you don't have to wait for hours for something like PVA to dry, and can move on to the next stage. They are also slightly gap filling. The various grab adhesives are useful for fitting panels to battens. Richard Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now