wiring Alde room stat

[Phoenix_V]

Can anyone tell me which wire from the Alde (vertical old style) gas boiler goes to which screw terminal on the roomstat - please

link to picture of back of stat below (sorry failed miserably to insert as an image)

 

clicky

Edited April 13, 2011 by Phoenix_V

[WotEver]

(sorry failed miserably to insert as an image)

 

Tony

[Phoenix_V]

Wow thanks

Edited April 13, 2011 by Phoenix_V

[Tony Brooks]

Can anyone tell me which wire from the Alde (vertical old style) gas boiler goes to which screw terminal on the roomstat - please

link to picture of back of stat below (sorry failed miserably to insert as an image)

 

clicky

 

 

The instruction manuals are on the Alde website for download. Regrettably I am away from home at the moment so can not look the connections up for you.

[Phoenix_V]

The instruction manuals are on the Alde website for download. Regrettably I am away from home at the moment so can not look the connections up for you.

 

Thanks I have the manual and the wiring at the boiler end is clear but the piece of paper with the roomstat was far from clear! hence the inquiry

[WotEver]

Is the boiler the 2920? If so, fig 10c on this pdf appears to show the wiring.

 

Tony

[Phoenix_V]

Is the boiler the 2920? If so, fig 10c on this pdf appears to show the wiring.

 

Tony

Well yes it does thanks but how to relate that diagram to the unlabeled screw terminals on my photo of the unit is the problem?

[Tony Brooks]

Well yes it does thanks but how to relate that diagram to the unlabeled screw terminals on my photo of the unit is the problem?

 

 

Are the terminals not labelled on the other side? You have to remove the clotted cover to gain access.

[WotEver]

If you take the front cover off the stat (because I can't believe you're supposed to wire it from behind) are the terminals then numbered?

 

Tony

[Phoenix_V]

If you take the front cover off the stat (because I can't believe you're supposed to wire it from behind) are the terminals then numbered?

 

Tony

 

Are the terminals not labelled on the other side? You have to remove the clotted cover to gain access.

 

 

 

Right yes I see now, thanks, feel a bit silly really

Edited April 14, 2011 by Phoenix_V