Markon SL105G Alternator Brushes

[Biggles]

Hello

I am looking for some brushes for my 240v Alternator.

The physical size is 9.98mm x 4.88mm the depth of the holder from base to flush at the top is 26.5mm but I have no idea of the original length of the brush.

I need 1 pair only

[Tony Brooks]

Have you talked to https://www.macfarlanegenerators.com.au/products/c143/Markon

 

I would also talk to Lancashire Rotating Electrics https://lre-ltd.co.uk/

 

In the past, I have filed down brushes from other machines to fit and resoldered the tails into the existing terminals.

[Biggles]

Thanks Tony

 

I will investigate there.  I too have also in the past used wet and dry to sand them down.  Just getting lazy nowadays

[Tonka]

I have one brand new. Unfortunately the Markon went down the tip beginning of this month having gone u/s and Cox at Atherstone were not able to get a spare part for having tried looking for 7 months world wide. Have replaced it with a Mecc-Alte es16f-150 but will confirm. 

[Tonka]

On 17/11/2023 at 12:55, Tony Brooks said:

Have you talked to https://www.macfarlanegenerators.com.au/products/c143/Markon

 

I would also talk to Lancashire Rotating Electrics https://lre-ltd.co.uk/

 

In the past, I have filed down brushes from other machines to fit and resoldered the tails into the existing terminals.

Macfarlane are in Australia.

@Biggles if you want the brush let me know and I can post it to you as I have it at home now