Puffling Posted April 6, 2023 Report Share Posted April 6, 2023 -.. .-- .- .-. ...- . ... (If you are so inclined) I'm changing my Morse control after cursing it so often for being positioned suited only for a dwarf helmsman. I'll remove it from the steel panel it's presently mounted on and install a new oak-faced ply board in its place, raising the control by about 25cm. I can see the control from the back of the steel panel, and that it is held with four screws. How do I reach the heads of those screws, please? I'm at the point shown in the photo, with the throttle handle/button assembly off. Expecting the black cover to be held by some concealed fastener. I'm unwilling at this stage to try levering the black cover off, as it feels tightly fitted. The single leaflet of instructions I have for this control shows no exploded diagram, only the advice that it can be removed from the panel without disconnecting the Morse cables. Link to comment Share on other sites More sharing options...
magnetman Posted April 6, 2023 Report Share Posted April 6, 2023 Is the red button the one you press to do the dot dot dash dot thing ? Link to comment Share on other sites More sharing options...
Guest Posted April 6, 2023 Report Share Posted April 6, 2023 (edited) That looks like it does indeed just prise off, or there is a fixing under the Dometic badge. An adult will be along shortly. Somebod like @matty40s will know. This is a picture of the back side of the current version. And the control shows four corresponding holes. Taken from here. https://www.sheridanmarine.com/product/seastar-teleflex-single-lever-700ss-side-mount-control Edited April 6, 2023 by M_JG Link to comment Share on other sites More sharing options...
PaulJ Posted April 6, 2023 Report Share Posted April 6, 2023 (edited) Its the same as mine- cover pops off and fits as M_JG says. Qualified to answer as Im not very tall 😀 Edited April 6, 2023 by PaulJ Link to comment Share on other sites More sharing options...
Puffling Posted April 7, 2023 Author Report Share Posted April 7, 2023 (edited) 16 hours ago, PaulJ said: Its the same as mine- cover pops off and fits as M_JG says. Qualified to answer as Im not very tall 😀 Yes, that was it. I just needed confirmation that it really was a push fit and not some fiendish hidden circlip. No height discrimination intended, no horses or dwarves were harmed in the moving of this control. 17 hours ago, M_JG said: That looks like it does indeed just prise off, or there is a fixing under the Dometic badge. An adult will be along shortly. Somebod like @matty40s will know. This is a picture of the back side of the current version. And the control shows four corresponding holes. Taken from here. https://www.sheridanmarine.com/product/seastar-teleflex-single-lever-700ss-side-mount-control Thanks! Edited April 7, 2023 by Puffling Link to comment Share on other sites More sharing options...
PaulJ Posted April 7, 2023 Report Share Posted April 7, 2023 38 minutes ago, Puffling said: Yes, that was it. I just needed confirmation that it really was a push fit and not some fiendish hidden circlip. No height discrimination intended, no horses or dwarves were harmed in the moving of this control. Thanks! I did chuckle when I first read your post. I was moving a lovely boat not long ago, everything on it and about it was great- except the morse control was at about knee height.What a pain -even I had to bend down to reach it 😀 Link to comment Share on other sites More sharing options...
Puffling Posted April 7, 2023 Author Report Share Posted April 7, 2023 5 minutes ago, PaulJ said: I did chuckle when I first read your post. I was moving a lovely boat not long ago, everything on it and about it was great- except the morse control was at about knee height.What a pain -even I had to bend down to reach it 😀 I do accept that the bargees of yore were shorter in stature than the average today. Lower nutrition, grinding work lifting and hefting must have contributed. But I bet the boat you moved was built in the current era, say since 1970. I've struggled against most things being too low for me, but simply put up with them because alteration (for example with a kitchen sink) would involve so much disruption. At least with this little Morsey alteration I am able to make a new start for relatively little investment. My boat has a trad stern. On windy and rainy days standing inside with the rear doors closed and hatch drawn close to chest, I've previously had to perform a sort of 'boat curtsy' in order to reach the control, not enough space for a bend. From what I've seen, cruiser stern narrowboats have an even lower mounting position for the pylon (or whatever you term the pillar that vital controls are mounted on). Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now