Jump to content

pquinn

Member
  • Posts

    1,441
  • Joined

  • Last visited

Everything posted by pquinn

  1. Hello Folks, Any idea where I could find one of those brass plaques that people put in their bathrooms along the lines of "If you haven't eaten it or you haven't drank it, don't put it in here"? Thanks, Paul.
  2. No, i dont think so as i asked leesan the best way to cut the hole and they said a hole saw.
  3. What else would i be doing on a saturday night after x factor?
  4. Hi folks, I am fitting a toilet waste holding tank and am gettuing one of those toilet tank packages from leesan. The tank will be a ''rotary molded tank' which i assume is some kind of plastic/fiberglass. what i would like to know is if it would be a good idea to use a jig saw to cut the inspection hatch as i need to buy at least five different holesaws for the installation and will have little or no use for these hole saws after i have installed the toilet and tank. the inspection hatch needs a 121 mm hole saw. Any ideas for cutting down on all these hole saws would be welcome. Thanks . Paul.
  5. landline, invertor, travelpower?. Ours is not a liverpool boat but much the same and this is our setup.
  6. This post cannot be displayed because it is in a forum which requires at least 10 posts to view.
  7. Not to hijack your thread EssBee but....... does anybody know of a good [solvent?] way to soften up the adhesive that holds them on, as far as i can tell mine were stuck on with something like marine flex/sika flex, or any tips would be appreciated. cheers, Paul.
  8. Oh! there not so bad, once you get to know them.
  9. This post cannot be displayed because it is in a forum which requires at least 10 posts to view.
  10. This post cannot be displayed because it is in a forum which requires at least 10 posts to view.
  11. This post cannot be displayed because it is in a forum which requires at least 10 posts to view.
  12. This post cannot be displayed because it is in a forum which requires at least 10 posts to view.
  13. Check the dimensions. Width wise i believe it is from under the gunnel to under the gunnel but i am sure somebody will be along to explain the easiest/quickest way to do this.
  14. Hello hopefulboater, now i am very more than likely wrong and do not want to cast any aspersions on the seller but to my eye and the perspective of the pictures'that boat does not look 57x 10 to me.
  15. I got a ski jacket and trousers from lidl or aldi about eight or nine years ago and still going strong. cheap and effective in poxy weather.
  16. This post cannot be displayed because it is in a forum which requires at least 10 posts to view.
  17. Ours stopped working fairly early on and i never bothered to fix it. After a while it just becomes a second nature most of the time to know roughly when it needs emptying. two days for some folks, longer for others.The exception to this is when you have visitors and kids,unless instructed they can fill the damn things in an hour. I am always amazed at the ammount of water that many house dwellers waste.
  18. This post cannot be displayed because it is in a forum which requires at least 10 posts to view.
  19. This post cannot be displayed because it is in a forum which requires at least 10 posts to view.
  20. This post cannot be displayed because it is in a forum which requires at least 10 posts to view.
  21. This post cannot be displayed because it is in a forum which requires at least 10 posts to view.
  22. This post cannot be displayed because it is in a forum which requires at least 10 posts to view.
  23. This post cannot be displayed because it is in a forum which requires at least 10 posts to view.
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.