umpire111 Posted April 21, 2017 Report Share Posted April 21, 2017 Erbespacher problems, any experts out there? Have a D5-WSC and after running for varying times it just cuts out. The timer seems to be ok. There are fault codes 52 and 30 showing, have seen what they mean but they add little. If I switch off the heater and turned it back on it works ok then again shuts off at varying time intervals....any ideas? Link to comment Share on other sites More sharing options...
umpire111 Posted April 22, 2017 Author Report Share Posted April 22, 2017 It starts then stops after a few minutes however has run on a couple of occasions. Fault code 052 is showing now. Anyone know someone in Nottingham or Sawley who will repair? Link to comment Share on other sites More sharing options...
chubby Posted April 22, 2017 Report Share Posted April 22, 2017 (edited) Do u not perhaps think that if you advise what " code 052 "' actually means then you might get some help ? Or , are you expecting potential helpers to go away & google what it means in order to come back and provide advice ? " Code 052 & 30 " means absolutely nothing unless you own the exact same unit . You say that the fault code info "'adds little " . This i don't understand- surely these codes , once interpreted, are telling you fault that needs adressing ? cheers Edited April 22, 2017 by chubby Link to comment Share on other sites More sharing options...
mrsmelly Posted April 22, 2017 Report Share Posted April 22, 2017 A quick google states code 052 is the safety cut out code as there has been no flame detected during start up. Have you done the basics like changed the glowplug for instance? Link to comment Share on other sites More sharing options...
chubby Posted April 22, 2017 Report Share Posted April 22, 2017 (edited) The only work ive ever done on my eber was 3 years ago and involved stripping it down and decoking & changing a pair of gaskets . At the same time i cleaned out a tiny fuel filter ( i have a wsc 4 ) & i replaced the wire gauze that fits over the glowpin . I used a video on YouTube about 8 minutes long . Cant put a link up though but its definately there . Thats all ive ever done but its been fine since . From time to time it does just cut out very instantly after about 40 mins . It just stops dead . But always runs fine next day . I can t be bothered to worry about it . when was yours last serviced / decoked etc Edited April 22, 2017 by chubby Link to comment Share on other sites More sharing options...
umpire111 Posted April 23, 2017 Author Report Share Posted April 23, 2017 Serviced last year but the engineer, thanks for all above Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now