IDS Posted November 5, 2016 Report Share Posted November 5, 2016 You are quite right. I suppose my main point is that it is a simple check without having to get down on your knees, and at the end of the day I'd be happy with a setting +/-20% of the optimum. Link to comment Share on other sites More sharing options...
ditchcrawler Posted November 5, 2016 Report Share Posted November 5, 2016 You are quite right. I suppose my main point is that it is a simple check without having to get down on your knees, and at the end of the day I'd be happy with a setting +/-20% of the optimum. Its a super quick check, I know but when I fill the kettle, If I fill it without the pump starting all is fine. If the pump does start but then runs for several seconds after I turn the pump off things are still fine. Link to comment Share on other sites More sharing options...
Happydays66 Posted November 7, 2016 Author Report Share Posted November 7, 2016 Hi I did what IDS suggested and it's worked a treat!! It's the best the water system has been. As the instructions just gave dimensions in MM rather than litres I estimated the accumulator held a litre and armed with my half litre glass I switch the pump on, turned it off and open the tap. Nothing came out. I started letting air out of the accumulator and repeated the steps until I got my half litre glass full. No more back flow and a roasting hot shower. Thanks for everyone's help. Link to comment Share on other sites More sharing options...
ditchcrawler Posted November 7, 2016 Report Share Posted November 7, 2016 Hi I did what IDS suggested and it's worked a treat!! It's the best the water system has been. As the instructions just gave dimensions in MM rather than litres I estimated the accumulator held a litre and armed with my half litre glass I switch the pump on, turned it off and open the tap. Nothing came out. I started letting air out of the accumulator and repeated the steps until I got my half litre glass full. No more back flow and a roasting hot shower. Thanks for everyone's help. Well done Link to comment Share on other sites More sharing options...
mross Posted November 7, 2016 Report Share Posted November 7, 2016 Thanks for updating us. It's good to have people who take up suggestions, achieve success and update the forum! I'm very happy that you are sorted. Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now