ditchy Posted January 14, 2017 Report Share Posted January 14, 2017 I want my webasto them top to stay on longer that 30-40 minutes. It's turns its self of after it reaches temperature but doesn't come back on in till turned back on by the timer. I know people that turn theirs on with the flame Sybil and it stays on until they press the flame symbol again. Please help. It seems like it's not worth havin if it's only on for this short time Link to comment Share on other sites More sharing options...
Brian M Posted January 14, 2017 Report Share Posted January 14, 2017 I've just fitted a 7day timer to our Webasto,purchased from Webasto marine, it is a simple swap with the original, unplug old,plug in New. Gives 4 settings per day for however long you want. I believe there is a fix for the basic control to allow manual on/off for longer running time, it's posted on the forum if you do a search. Link to comment Share on other sites More sharing options...
Jrtm Posted January 14, 2017 Report Share Posted January 14, 2017 I want my webasto them top to stay on longer that 30-40 minutes. It's turns its self of after it reaches temperature but doesn't come back on in till turned back on by the timer. I know people that turn theirs on with the flame Sybil and it stays on until they press the flame symbol again. Please help. It seems like it's not worth havin if it's only on for this short time Sounds silly but unplug the power to it and wait afew mins and put back then see what it does it may ave been programed without realising it. Link to comment Share on other sites More sharing options...
ditchy Posted January 15, 2017 Author Report Share Posted January 15, 2017 Think this is the job, page 24. https://www.butlertechnik.com/downloads/4110310A_Thermotop_C_E_Install.pdf Link to comment Share on other sites More sharing options...
mross Posted January 15, 2017 Report Share Posted January 15, 2017 If you cut the power to a Webasto it won't shut down in proper sequence, it will just stop suddenly. NMEA will advise the consequences, if any. Link to comment Share on other sites More sharing options...
Brian M Posted January 15, 2017 Report Share Posted January 15, 2017 (edited) Our basic timer had this fix,pressing the flame button to start and stop. Pressing stop at any time and the Webasto would run through its shutdown cycle. Edited January 15, 2017 by Brian M Link to comment Share on other sites More sharing options...
Jrtm Posted January 15, 2017 Report Share Posted January 15, 2017 If you cut the power to a Webasto it won't shut down in proper sequence, it will just stop suddenly. NMEA will advise the consequences, if any. If it was from what i said it was ment when it wasnt / hasnt been running Link to comment Share on other sites More sharing options...
mross Posted January 15, 2017 Report Share Posted January 15, 2017 If it was from what i said it was ment when it wasnt / hasnt been running Sorry , I was answering post #2. I 'got' your point ;-) Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now