madsunday Posted July 29, 2020 Report Share Posted July 29, 2020 Just in the process of getting a boat for the first time! Need to hand some bits on the walls like curtain rails and such. Is it any different than mounting into a normal wall? Would be going into the ply with spray foam insulation behind Cheers Link to comment Share on other sites More sharing options...
Onewheeler Posted July 30, 2020 Report Share Posted July 30, 2020 Screws of length to not quite go through the ply. Screwfix turbogold are good. Link to comment Share on other sites More sharing options...
Tony Brooks Posted July 30, 2020 Report Share Posted July 30, 2020 8 hours ago, madsunday said: Just in the process of getting a boat for the first time! Need to hand some bits on the walls like curtain rails and such. Is it any different than mounting into a normal wall? Would be going into the ply with spray foam insulation behind Cheers Depends on the thickness of the ply. Some of mine was only about 3/16" thick and that caused problems for anything but the lightest fixture. Normal wall fixing and plaster board fixing things far too long so I either took the panel off and glued thicker ply to the back or used gravity toggles. Hopefully your ply will be at least 1/2" thick Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now