Keith M

For the Mass Combi 12 / 4000 / 200 to function correctly the input current required needs to be around 17 amps Inside the unit are two rows of dip switches you can limit the input current via these dip switches Please PM if you need any further help.

Hi All, I have been searching for this relay with out any success Can any help Many Thanks

Try disconnecting the battery temperature sender from the battery charger.

I have been adding some replys for a day or two as I am a new member. Which ever meter you buy if you can run to the eacher cost pick a ture RMS type of meter with a good resolution.

Hi I have been involed with installing AC and DC system in all types of craft for more than 20 years. You get what you pay for, take a look at Mastervolts BTM 3. quote name='Moisha' date='Jan 29 2007, 03:45 PM' post='103886'] Hello all--now that we are edging our way toward electrics--the stove is in!!!!---all sorts of electrical queries will be flying your way. We were told that as we will be living mainly off batteries and with little access to on-shore mains electricity, we must invest in a battery monitor/shunt. The prices quoted have been exorbitant and I was wondering if any of you had suggestions for reliable yet not scrape-the-crumbs-out-of-the-wholes-in-your-pocket monitors. I came across these on line: http://www.yachtbits.com/nasa/nasa_clipper...itor_system.php, but was told that they are not accurate enough by a salesman for VoltMaster. Is that true? Because 80 quid seems ok, but 300--not! Any shops/websites for these things that you would recommend? Thanks again--don't know what we would be doing without you, Fine People. Mosha.

Hi what was the voltage of the batteries before you stated the engine Gel batteries have a very slow discharge rate

In my opinon there is only one builder to who can builder your new boat that is NORTON CANES BOAT BUILDERS.