dreadnought Posted December 19, 2016 Report Share Posted December 19, 2016 hi all, i`ve got glass fibre pothole liners for my nb and they are a little too deep, i`m looking at trimming five mill off, i`m not sure the best (neatest) way of doing this ,is there anyone come across this before, whats the best method to use, many thanks Link to comment Share on other sites More sharing options...
pophops Posted December 19, 2016 Report Share Posted December 19, 2016 Never done this but I think I'd try a belt sander. Link to comment Share on other sites More sharing options...
PaulJ Posted December 19, 2016 Report Share Posted December 19, 2016 I use a 'skinny' metal cutting disc in an angle grinder. Gives a very good finish with the least amount of dust.. Link to comment Share on other sites More sharing options...
Top cat Posted December 19, 2016 Report Share Posted December 19, 2016 I used a jigsaw with a metal cutting blade to trim ours , worked a treat. Just take it slow Top cat Link to comment Share on other sites More sharing options...
series3 Posted December 20, 2016 Report Share Posted December 20, 2016 As said. Grinder with 1mm disc...try a flapper disc if it's only a couple of mm Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now