shaun.riley Posted June 26, 2006 Report Share Posted June 26, 2006 hi i have a beta marine B3KR1 engine do any of you know what heater glow plugs i need Link to comment Share on other sites More sharing options...
Canal Shop Man Posted June 26, 2006 Report Share Posted June 26, 2006 hi i have a beta marine B3KR1 engine do any of you know what heater glow plugs i need Have you looked to see what it says on the existing ones? Either on the white ceramic bit or on one hexagon face. What you already have is a good starting point Link to comment Share on other sites More sharing options...
Cafnod Posted June 26, 2006 Report Share Posted June 26, 2006 Are you sure the glow plugs are at fault? If they are a multimeter will show them as open circuit. You could do worse than go to a DECENT motor factors and put them on the counter and say four of these please. Link to comment Share on other sites More sharing options...
shaun.riley Posted June 26, 2006 Author Report Share Posted June 26, 2006 (edited) all it say on the hex bit is 8j and nothing else i think this is the fault because the engine used to start with me using them then now it wont and there is power going to the plugs so i am thinking it is the plugs at fault however i can start the engine by putting a flame down the air intake and the engine fires and runs normal Edited June 26, 2006 by shaun.riley Link to comment Share on other sites More sharing options...
bottle Posted June 26, 2006 Report Share Posted June 26, 2006 (edited) Hi Shaun Here is Beta Marine website it will not give you the answer directly but gives ways of contacting them, I expect they will know the right ones. You say there is no power going to the plugs have you checked all the wiring and connections right back to the point of supply. Edited June 26, 2006 by bottle Link to comment Share on other sites More sharing options...
shaun.riley Posted June 26, 2006 Author Report Share Posted June 26, 2006 Hi Shaun Here is Beta Marine website it will not give you the answer directly but gives ways of contacting them, I expect they will know the right ones. You say there is no power going to the plugs have you checked all the wiring and connections right back to the point of supply. i said there is power going to the plugs. Link to comment Share on other sites More sharing options...
bottle Posted June 26, 2006 Report Share Posted June 26, 2006 i said there is power going to the plugs. Sorry Shaun I misread it. Link to comment Share on other sites More sharing options...
shaun.riley Posted July 10, 2006 Author Report Share Posted July 10, 2006 thank you all for your help i have now found some at a company called jennings in netherton the guy there is well up on his trade very knowledgible Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now