1agos Posted July 8, 2020 Report Share Posted July 8, 2020 I measured the oil removed from my year old PRM 150 gearbox and it was 1/2 pint more than recommended. Is this extra to allow for the volume inside the pipes and cooler or do the dipstick marks allow for this.? Thanks for any advice Link to comment Share on other sites More sharing options...
Tracy D'arth Posted July 8, 2020 Report Share Posted July 8, 2020 (edited) 7 minutes ago, 1agos said: I measured the oil removed from my year old PRM 150 gearbox and it was 1/2 pint more than recommended. Is this extra to allow for the volume inside the pipes and cooler or do the dipstick marks allow for this.? Thanks for any advice Almost certainly. Fill to the mark, run engine, stop, check and top up to the mark. Done. Been said before, the dipstick has 2 marks, consider the top mark is max with it screwed in, bottom mark is max with it not screwed in. Saves time and screwing around! TD' Edited July 8, 2020 by Tracy D'arth Link to comment Share on other sites More sharing options...
1agos Posted July 8, 2020 Author Report Share Posted July 8, 2020 That was quick, you have put my mind at rest that I wasn't overfilling. Thanks Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now