sanctuary79

I have 3 of these ... would recommend! https://www.montaguebikes.com/folding-mountain-bikes/ A

will do, ta

Thanks for the replies. Will order the controller this week. (with meter) Looking forward to hooking these up!

i have bought some heavy duty tube clamps and will have them attached across the (metal) grab rails. It took me ages to sort out the fixings! Yes, they will be flat - but as they are so big, I'm sure they'll power up my lesuires nicely. But yes, good point on the size!

thanks

http://i.imgur.com/aYL76gd.jpg http://www.bsp.lt/en/polycrystalline-solar-panels/130-jinko-jkm-245-poly.html Jinko 245w (2 of) I have seen a few on Bimble. (are these all for 12v?) What should I be looking for? Thanks in advance this top of the list. http://www.bimblesolar.com/offgrid/mppt/40amppt thoughts?

thanks again

thanks

I have decided to sell a set of heavy brass closed portholes I bought for my boat a few years back and buy a set (8) of new portholes to fit 11" holes. If anyone could recommend chandlers that would most helpful! I am looking for 4 that are closed and 4 that open. Open to suggestion on style/metal/fixings. The lining inside the boat has not been completed yet, but it has been insulated with Celotex. Not keen on 'S' types btw! Thanks in advance. A

Just to echo as a few other here, I too have had very positive experiences when dealing with Kedian Engineering. Recommended for quality of work and communications. A.

sounds perfect. PM sent! thank you for the replies.

Thank you, this is helpful. Ive been up to visit a few, north of Coventry (Atherstone/Fazley), but not found anything suitable yet!

I'm looking for a long-term mooring near to the city of Coventry. I am currently looking over various marina websites alongside auction pages on CRT too. Has anyone got any suggestions for places to look? Boat length = 45ft. Thanks

well who saw it coming? http://www.bbc.co.uk/news/uk-england-london-19615815 wonder on where those beams will end up?

Thats right the idea was to follow the curve from the fluch celeotex boards and fix onto 1" battens that run along the sides...ie most of the sheet would be stuck (marine flex) to the roof - id say 70% would be in contact with boards and angles. the air gap debate is now in the bin for me. a trim would hide the sheets meeting (5ft by 4ft) with no lighting from the roof and 4/5" holes for vents thanks for all the replies GGRRRR need my camera back form the missus - would be easier to show you all ....right?

@twbm hands up...my bad @higgs thanks very helpful...will try and cancel the order and get some thicker sheets Ta

thanks for the relpy however, im a little confused the floor is 22mm - done the ply (3.5) has been brought for the side (under and above gun) and the inside of the roof covering 50mm and 25mm celeotex boards in steel structure

so i have just ordered some 8 by 4 sheets of 3.5 ply ext, not birch plans to just vanish them however is this too thin? im using them for the roof and sides with battens 2ft apart thoughts?

thanks for the replies!

Please explain the no air gap for me This is really bugging me!!!! Thanks in advance

Hey all id like to ask any friendly and local boaters if they wouldnt mind giving me some advice on some work that is needed on my boat im located near Springfield park I have to make a wooden hatch and finish insulating the inside i have no camera and little use of the laptop most of the time hence the face to face (human) interaction willing to make tea and provide cake A 07722454777 Ps - I really need to sort my batteries out too... can these (120a) be taken to scrapies for cash?

Is there anyone around the Springfield Marina area that could help me get my Lister running I have been away from the boat for months and am now having trouble starting the boat! perhaps a jump? Or even better a hitch up to Haggerston? Help 07722454777