Shipleymanx

Hi Has anybody swopped their leisure batteries for FLT batteries. If so pros and cons

Hi thanks all, now sorted, put a fuse near the batteries, increased cable size, and put a switch in the positive cable, alls good now.

Thanks for your help. i think it is the cables that are two small, plus they run all the way up to the control panel, then back to the fridge, which trebles its run. Why not run straight to the fridge, with a local switch and fuse

Sorry folks was given slightly wrong info. The 10.7 reading was when the compressor was running. But it still goes into limp mode very quickly. Would a seperate battery close to the fridge help.

Hi my son has a 12 volt fridge on his narrowboat. He is having to charge his batteries via a jenny, problems occur when he has used his 12 volt system for a while, his fridge goes into limp mode. He has taken a reading off his batteries and that gave him 12.6 volts, but at the fridge end he only got 10.7. Is this due to the cables being too narrow. When he charges up via his engine it take longer to go into limp mode, also when he was on mains hook up at a previous mooring, he never had a problem. His fridge is a Danfoss. Any help would be appreciated.

Thanks for the replies. This problem has only appeared when my son went from shoreline to charging by genny. The volt reading as from the batteries direct and also looking at the permanent gauge on the boat, does this alter any thing, cheers

Hi i have a Danfoss 12v fridge that has started to flash, indicating a low voltage. The only problem is that the voltage is showing 11.8 to 12.3 when it flashes. The manual states this should only happen at 10.4 volts. The other problem i have is that the two battery banks show different readings.one is 12.5v and the other is 13v, why is there a difference. thanks

Have to agree with Midnight, my son had a boat at ripon, same experience, he got the impression they wanted to try and cash in on the Newcastle area market. He is now at a private marina fro a fraction of the price

HiMy son has 4x 110 Numex maintenance free lead acid batteries, they have been chargeing at 15 volts is that okay?

Hi there reading all the replys,do i take it that its not just a case of plugging in a genny. My son's washing machine is rated at 1500 watts, but a 2.4KW genny won't run it, any help please

thanks thanks

Hi does any body on here have the current situation re river levels at Linton Lock as we areplanning to travle through tomorrow. thanks

Hi if it helps any body, i just found out that Naburn lock will be shut at least another week

Hi just had an update, it needs alot of the electrics replacing due to being under water for four days. They don't know when it will open as they have to wait for the parts and then of course fit them

Hi Has anybody heard any update re situation at Naburn. I understand the sparkies were there yesterday. I was hopeing to go through this weekend?