ukdiggerboy Posted February 10, 2015 Author Report Share Posted February 10, 2015 hi neil as long as it stops the worst of it i'll be happy, I'm not a fan of the pram cover either , im going to put a drip around the new deck boards to help the water into the channel,and ive seen that sound proofing but isnt it expensive lol. the sr3 is bolted direct to the hull might try putting rubber matting between the mounts but cant see that making much difference either. Was waiting for a mate who's a welder but cant wait forever need to get on so had a go meself ?. Link to comment Share on other sites More sharing options...
ukdiggerboy Posted June 2, 2015 Author Report Share Posted June 2, 2015 back from working away a lot and heres some more progress ? bloddy hard work and more than i thought lol anyone heard that before ? so new front frame and doors/windows in Link to comment Share on other sites More sharing options...
bargemast Posted June 6, 2015 Report Share Posted June 6, 2015 Your job on the boat is progressing well, all the work you've done is looking good. Good luck with the rest. Peter. Link to comment Share on other sites More sharing options...
ukdiggerboy Posted June 6, 2015 Author Report Share Posted June 6, 2015 thanks Peter more done this weekend will post again after sunday Gary Link to comment Share on other sites More sharing options...
NickF Posted June 6, 2015 Report Share Posted June 6, 2015 thanks Peter more done this weekend will post again after sunday Gary I look forward to reading about it! Link to comment Share on other sites More sharing options...
ukdiggerboy Posted June 8, 2015 Author Report Share Posted June 8, 2015 heres a couple more of the lining and around the front frame all done over the weekend found the gunwales to the frame where it turns up and in and all over the place a right pain in the a--e . the roof collars are made by laminating three strips of ply glued and screwed together in a jig then removed after the glue set we took the screws out Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now