Sir Richard Head Posted July 2, 2005 Report Share Posted July 2, 2005 Hi All, If you were having a boat built and shotblasting was on offer for £1200, would you consider it a worthwhile investment? Would be very grateful for any advise. Link to comment Share on other sites More sharing options...
nigel carton Posted July 2, 2005 Report Share Posted July 2, 2005 That seems a bit steep! Link to comment Share on other sites More sharing options...
Gary Peacock Posted July 3, 2005 Report Share Posted July 3, 2005 Two questions would spring to mind why does it need shot blasting and if it does why isn't it included? And £1200 is rather a lot. Link to comment Share on other sites More sharing options...
Sir Richard Head Posted July 3, 2005 Author Report Share Posted July 3, 2005 Gary That's really the question that I'm asking. I've read a little bit about it and it would seem like a good idea at the right price, but what, if any are the real benefits? Thanks for the response. Link to comment Share on other sites More sharing options...
Richard Bustens Posted July 3, 2005 Report Share Posted July 3, 2005 I have not bothered, but there are a lot out there that say you should, then there are as many that say no you should not, All i can see it doing is to make a mess that you will be cleaning up for the next five years. Link to comment Share on other sites More sharing options...
Gary Peacock Posted July 3, 2005 Report Share Posted July 3, 2005 Gary That's really the question that I'm asking. I've read a little bit about it and it would seem like a good idea at the right price, but what, if any are the real benefits? Thanks for the response. 24772[/snapback] Most builders use pickled and oiled steel (The mill scale is removed after the plate is rolled and then a protective oil is applied to prevent corrosion) the practise in the dark and distant past was not to pay to have the steel descaled or oiled but to build a hull and then leave it in the open for a few weeks and let the steel rust this also removed the scale. You would then shot blast the hull to remove the rust prior to painting. If you don't remove the scale and paint over it you might get a nasty surprise in the future because the scale as a bad habit of eventually detaching it's self from the steel and brining the paint with it. The cost of getting prepared steel is now less then the cost of blasting and cleaning up afterwards so I would be asking a few question about why it needs to be done in the first place. At the hight of the steel shortage last year all sorts of undocumented steel was being offered at some very tempting prices of course most of this was already very rusty. (If you are really concerned ask to look at the certification paperwork for the steel that was used, it's a bit like a birth certificate and proves the specification and origin of the steel used normally BS EN10025) Link to comment Share on other sites More sharing options...
Golden Duck Posted July 3, 2005 Report Share Posted July 3, 2005 (edited) SRH, What is the square rigged ship that appears on your signature ? Is it the "Marlborough" or the "Worcester" perhaps ? Edited July 3, 2005 by Golden Duck Link to comment Share on other sites More sharing options...
Sir Richard Head Posted July 4, 2005 Author Report Share Posted July 4, 2005 SRH, What is the square rigged ship that appears on your signature ? Is it the "Marlborough" or the "Worcester" perhaps ? 24790[/snapback] It is indeed the Worcester where I leaned the gentile art of seamanship and boat handling from the tender age of 13. Link to comment Share on other sites More sharing options...
Sir Richard Head Posted July 4, 2005 Author Report Share Posted July 4, 2005 Most builders use pickled and oiled steel (The mill scale is removed after the plate is rolled and then a protective oil is applied to prevent corrosion) the practise in the dark and distant past was not to pay to have the steel descaled or oiled but to build a hull and then leave it in the open for a few weeks and let the steel rust this also removed the scale. You would then shot blast the hull to remove the rust prior to painting. If you don't remove the scale and paint over it you might get a nasty surprise in the future because the scale as a bad habit of eventually detaching it's self from the steel and brining the paint with it. The cost of getting prepared steel is now less then the cost of blasting and cleaning up afterwards so I would be asking a few question about why it needs to be done in the first place. At the hight of the steel shortage last year all sorts of undocumented steel was being offered at some very tempting prices of course most of this was already very rusty. (If you are really concerned ask to look at the certification paperwork for the steel that was used, it's a bit like a birth certificate and proves the specification and origin of the steel used normally BS EN10025) 24774[/snapback] Gary Thanks you very much for the very complete explanation. I shall indeed ask the appropriate questions and hopefully avoid the need to part with such a princely sum. Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now