Hi all.
This is my first post on the forum, although I have been avidly browsing for a whie. It's a good balance between good practical advice and some very witty humour.
To get to the point, I bought a 56' NB in November this year and have decided to fit a Morso squirrel 1410. i am trying to install to the guidelines in the Sliftec document https://www.google.co.uk/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0ahUKEwjvsaeegJbYAhWMaFAKHZMzDmIQjBAILzAB&url=http%3A%2F%2Fwww.soliftec.com%2FBoat%20Stoves%201-page.pdf&usg=AOvVaw3lL3VSFbJtXoT8qzXs8wyr
The document states that the stove needs to have the stove fixed to the hearth. The legs on the stove do not have any fixing points. Any pointers as to how to fix the stove will be much appreciated - would a chain bolted to the stove and to an anchor point on the hearth be sufficient (possibly two)?
There is also a vent for the cold water tank which will be behind the stove. I am going to put 25mm Cal-sil board behind the stove. Can I just cut a square hole in the Cal-sil and scre the vent cover onto the cal-sil board. If I block off the vent then i fear I will get more condensation on the cold water tank. Any thoughts appreciated.
TIA
