Lister Changeover Valve

[Jon Carson]

Hello,

Does anyone know where I might be able to get a Changeover Valve, part no 291-2113/9. I live in Australia and have snapped one in my FR4 inboard diesel 1964 engine.

Thankyou, and BTW, love the forum. Just new so... Hi.

[George94]

Marine Engine Services at Uxbridge will either have one, or be able to point you in the right direction. Chris is very helpful (as is Peter!).

 

www.marineengine.co.uk/

 

Did you drop an anvil on it?

[by'eck]

Marine Engine Services at Uxbridge will either have one, or be able to point you in the right direction. Chris is very helpful (as is Peter!).

 

www.marineengine.co.uk/

 

Did you drop an anvil on it?

 

You could also try Martyn at Marine Power Services.

[Jon Carson]

Thanks by'eck. I'll give them a go. I'm not sure how I did it. When I bought her two months ago i had to motor her down to my area on a 11 hour run. When I got home I couldn't lift the Compression lever. She was jammed. So I yanked her hard as I could and that's when the end seat broke off. That valve smoked a bit anyway. Im not that mechanically minded at all but pulled the plug out and cleaned her up. She was carbioned up terribly. I've sourced another valve, , cleaned it all up and ran her on Sunday and she went beautifully with no smoke. I'd just like to have a spare. Once again thankyou so much. Cheers Jon

 

Thankyou also George94. I'll try all suggestions.

Cheers

Jon

[by'eck]

There's a video here on MPS website showing how they should work.