hello Mike. Yes it is only the top section of the boat, that is to say everything above the 'D' rail or 'Strake rail'. Which should include the front deck area, the well deck, the rear deck, gunwhales and fashes. The blacking was done a few months ago and again is priced by the foot length of your boat and is generally something between £7 and £10 per foot including hauling the boat out of the water, jet washing the hull, and two coats of bitumastic. If you want the hull grit blasted clean and a more hard wearing 'two pack' coating applied the cost will be considerably more but is supposedly expected to last around 3 times that of standard bitumastic.
The fittings being removed from my boat consist of the portholes and mushroom air vents which has less to do with a steady hand or masking tape, but more to do with exposing and treating any rust that is hidden prior to a nice new paint job that may very soon look spoilt if such action has not been undertaken.
Andy