Benno 1688

Does anyone know the name of the head gasket test fluid on ebay

I have opened the bleed tap until water is spraying out but i have not done the main pipes.

How would I know if it was the head gasket?

hi all my 1800 bmc runs fine for about an hour then it starts to over heat I ran with the engine cover open and its blowing water out of the over fow pipe on the filling cap. It appears to have loads of air in the system, any ideas.

Done it just needed to keep at it. I did not go near the idle damper something I learned early on dont touch it. The title by the way was my attempt at humour. Thanks for your replies.

Yes fuel is on. It comes out of all the bleed points except the injector unions.

Yes I disconnected them nothing, them I just disconected 1 and 3 nothing ?

Yes thats the problem I carn't get the fuel up to the injectors ?

Hi I have read most of the comments about bleeding these engines, its got a reconditioned cav pump it has always run well, I have recently changed the filters and im now struggling to get any fuel to the injectors. I bleed it from the lift pump to the filter top it come out like a fountain. then down to the diesel pump the bleed screw on the top blows out like moby dick, I just cannot get it to the injectors what am iI doing wrong. Im getting sick of taking the batteries off and charging them at home. Any help would be greatly recieved.