Ray55
-
Posts
7 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Blogs
Store
Posts posted by Ray55
-
-
This is the first time I've used the generator, as always had shore power before and no problems.
Mains sockets work fine off the inverter but it is a different lead to the one I used for shore power at the marina, so you could be onto something there?. Will try a different one tomorrow before I charge up and also try the earth - neutral link as suggested by Richard.
Really appreciate all your help guys - what a wonderful community we have!
-
Thanks Tony, I think you could be right because I have two (one for each side of the boat) and even with no load on one side of the boat, I still can't engage that RCBO. Off with my head tourch to trace some wires!
-
They are RCBO's B16 30mA if that helps?
-
Thanks Richard that's really interesting and I didn't realise that. I will definitely give that a try!
Hi Nick the breakers in the 240v DB/consumer unit trip out. I do have a basic grasp of Ohms law but if you can shed any light on this I would be grateful ?
-
Thanks Matty for prompt reply!
I was wondering that? The supply goes straight to the inverter/charger and then to 240v DB. Once the charger goes into float - should I then be able to get 240? Thanks again Ray
Just my fridge/freezer, which when the compressor is running is pulling 3-4 amps according to my battery monitor. ? Think I've just answered my own question! Bigger Generator or 12v fridge required ?
-
Hi I'm Ray I'm new to the forum so excuse me if I make any elementary mistakes! I've recently moved from a marina onto the canal. When I was in the marina I was plugged into shore power and no problems. On the canal when I plug my generator into the shoreline socket the batteries charge but 240v to the boat trips out and won't allow me to switch it back on? The generator is a Honda eu20i. Is this normal? Any help greatly appreciated. Cheers Ray
Generator to pro combi s
in Technical & Account Support
Posted
Hi Guys thanks so much for all your advice. I've managed to sort out the problem!
I replaced the RCBO'S with MCB's and an RCD and low and behold the problem solved ?.
Many thanks for all your help, Happy New Year Ray