Jump to content

Jamm

Member
  • Posts

    133
  • Joined

  • Last visited

Posts posted by Jamm

  1. 3 hours ago, zenataomm said:

    It's pointless trying to rationalise such a tiny market concerning such a small hobby, down that road madness lies.

    How many new boats have been made each year for the last X years?

    How many scrapped or removed from the network?

    How many newcomers to the hobby?

    How many have left for whatever reason?

    How much footage of empty towpath is left in London?

     

    I like this poem!  :) 

  2. It's part of a public footpath. Granted it only leads to the next bridge but there is property on that side. I doubt Crt have any right to remove it as rights of way have to be maintained. It's also a historic site of an old tramway. I've never experienced difficulties with it myself.

  3. Sofas tend to be bulky and deep. I opted for a bench seat which is much shallower than most sofas. Mines opposite both a stove and dinette and I also have a central walkway through to the galley. If you opt for a sofa, think about the space it takes up in the width of your cabin and think about what you can't have opposite it.

  4. Hi. Scholar Green.... pub Rising Sun. Gurnett Aqueduct ...Old Kings Head. Bollington. .. Vale Inn. Higher Poynton... Boars Head.

    If you have no guide book then I suggest you get yourself a free leaflet from The Macclesfield Canal Society. If you go on to the Macc from the Trent and Mersey you can get said leaflet from a box next to Hall Green lock, opening with your BW key.

    Mooring can be difficult in places but nothing a car wheel won't sort out. It's all trial and error. Enjoy.

  5. Mmmm Mike wipe a piece of bread on your sump it might taste nicer.

     

    Yer that sounds nice but neat Marmite looks like comastic. Pffft

    No, not when cooked, try it. Only uses a small amount of Marmite and it mostly runs off the taytos.

  6. 1) Generally you should moor on the towpath side unless there is signage to say you can moor on the offside. You also need to observe that sometimes there is private mooring on the towpath.

     

    2) I have tied to a tree once but it's not the done thing and can cause damage to the tree.

     

    3) Mooring with weights on the canal? :o You need to make sure your boat is secure to the side of the canal so it does not interfere with passing boats. Use mooring stakes, mooring hooks or goat chains where there is metal pilings. Visitor moorings tend to have rings.

     

    If you can get your boat in sufficiently to get on and off the boat, then great. It's trial and error in many out of the way parts of the canal system. Sometimes the edges are too silted up to moor and the bank unstable.

  7. I had the same/similar problem with my shower plughole. It was cracked about halfway around the perimeter letting water escape into the cabin bilge below. The water from mine made it's way to the back of the boat where my inspection hatch is.

     

    I did a repair and is still going strong a year later. It looks a bit of a bodge job but it works and now I just keep an eye on it and make sure I never stand over the plughole (it's not well supported underneath anyway).

     

    I used a compound called instant wet grab. Once dry I topped this with some white silicone sealant.

     

    One day I will buy a new shower tray tongue.png

     

    Good luck,

  8. I worry about the boat sinking even though there is only about 6 inches under it before it hits the bottom of the canal laugh.png

     

    It plays on my mind. In the past I have had very weird dreams about the boat sinking in very strange circumstances.

     

    Its a good picture smile.png

    Yeah, me too. Thank goodness for silt :lol:

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.