DannyC Posted December 24, 2018 Report Share Posted December 24, 2018 Hi everyone, I hope you are all enjoying the build up to Christmas. I have just moved onto my Liverpool Boats Cruiser Stern and I am looking to secure the back door in a way that is cryptic - so potentially burglars cannot tell whether I am in or out just by looking at the boat. The issue with putting a big padlock on the door is that it advertises that the boat is empty. I also want to ensure that it is secure when my other half is in so I don't have to worry about her. Does anyone have any good ideas for this? I had someone come and take a look recently but he didn't have any suggestions other than to put a sort of cover over the padlock. Thanks Link to comment Share on other sites More sharing options...
haggis Posted December 24, 2018 Report Share Posted December 24, 2018 (edited) I agree that a padlock advertises the fact that the boat is unoccupied and I was surprised when one of the canal magazines advocated using a large padlock when they did a feature on boat security . A mortice type lock for a door which needs to be opened from either side (front door ?) or a means of locking from the inside for a door used mainly for exit (stern?) . Neither solution tells passers by whether a boat is occupied or not. haggis Edited December 24, 2018 by haggis Link to comment Share on other sites More sharing options...
DannyC Posted December 24, 2018 Author Report Share Posted December 24, 2018 https://www.bing.com/images/search?view=detailV2&ccid=k02XmioH&id=3DE6B575A18E388D8774B15CC2348A9B4B7015B0&thid=OIP.k02XmioH8Jz-4cSJuCH1QgHaFc&mediaurl=http%3a%2f%2fc8.alamy.com%2fcomp%2fF41HJC%2fcolourful-paintings-on-narrowboat-doors-F41HJC.jpg&exph=956&expw=1300&q=sterm+doors+narrow+boat&simid=607994001257792959&selectedIndex=14&ajaxhist=0 The doors are the same design as these ones. I am not sure whether a yale would work... Link to comment Share on other sites More sharing options...
Alan de Enfield Posted December 24, 2018 Report Share Posted December 24, 2018 21 minutes ago, DannyC said: Does anyone have any good ideas for this? I had someone come and take a look recently but he didn't have any suggestions other than to put a sort of cover over the padlock. You don't want any sort of padlock (covered or not) when you are inside. You need a form of lock that can be locked / unlocked from both inside and outside. A Yale type lock is not difficult to fit but you may need to have doors 'altered' for it to work. Link to comment Share on other sites More sharing options...
Athy Posted December 24, 2018 Report Share Posted December 24, 2018 As implied above: never, never, NEVER* have the back door padlocked from the outside when you are inside. I hope I don't need to explain why. So, since you'll be locking it from the inside, whether you use a padlock, bolts or whatever, nothing will give away your absence to passers-by. If you use a padlock, make sure it's locked only when you're away from the boat: how will you go about finding its fiddly little key when smoke and flames start to engulf the bedroom (or whichever room you have at the blunt end)? * in case you missed the point, that's never. Link to comment Share on other sites More sharing options...
DannyC Posted December 24, 2018 Author Report Share Posted December 24, 2018 I am not planning on padlocking it from the outside. I recognise that would be very stupid! What I need is something that I can open and close from inside and outside. I just don't know whether a yale/ mortise lock will work on the type of doors I have (see the picture) or what kind of alterations I know. Link to comment Share on other sites More sharing options...
Athy Posted December 24, 2018 Report Share Posted December 24, 2018 4 minutes ago, DannyC said: I am not planning on padlocking it from the outside. I recognise that would be very stupid! Good - it's a pity that whichever boatimag advocated fitting one didn't have your common sense. Yes, a Yale would work with those doors, but making the hole for it to fit into could spoil part of your decorative paintwork. Link to comment Share on other sites More sharing options...
Derek Porteous Posted December 24, 2018 Report Share Posted December 24, 2018 We had a Yale type lock fitted to our Liverpool cruiser. I believe it may have been imported from the USA. It has a Yale lock on the outside, but the inside interlocks to a grid like receptor which is on the underside of the hatch cover (sorry, no pics). From the outside you cannot tell if is is locked or not, and it can be locked both from the inside and the outside. 1 Link to comment Share on other sites More sharing options...
cereal tiller Posted December 24, 2018 Report Share Posted December 24, 2018 Just now, Derek Porteous said: We had a Yale type lock fitted to our Liverpool cruiser. I believe it may have been imported from the USA. It has a Yale lock on the outside, but the inside interlocks to a grid like receptor which is on the underside of the hatch cover (sorry, no pics). From the outside you cannot tell if is is locked or not, and it can be locked both from the inside and the outside. I have 4 Doors on the Narrowboat and one of them has a Yale lock which is Key outside and Knob for Inside.all the other Doors have Barrel Bolts so can ALWAYS be opened from the inside .Athy omitted a Few Nevers from his Post. Link to comment Share on other sites More sharing options...
Athy Posted December 24, 2018 Report Share Posted December 24, 2018 Sounds good. Do you know the brand name, so that the O.P. could find one in a store or on the internet?> Just now, cereal tiller said: I have 4 Doors on the Narrowboat and one of them has a Yale lock which is Key outside and Knob for Inside.all the other Doors have Barrel Bolts so can ALWAYS be opened from the inside .Athy omitted a Few Nevers from his Post. I never did. Never. (Enough, already)? Link to comment Share on other sites More sharing options...
cereal tiller Posted December 24, 2018 Report Share Posted December 24, 2018 1 minute ago, Athy said: Sounds good. Do you know the brand name, so that the O.P. could find one in a store or on the internet?> I never did. Never. (Enough, already)? OK the O.P. has likely understood the Importance of NEVER NEVER Padlock Boat Doors from the Outside so I shall not mention the matter again ,well , hardly ever... Link to comment Share on other sites More sharing options...
TheBiscuits Posted December 24, 2018 Report Share Posted December 24, 2018 3 minutes ago, Athy said: (Enough, already)? No Nay Never! Link to comment Share on other sites More sharing options...
Steve42 Posted December 24, 2018 Report Share Posted December 24, 2018 Fit a Yale or mortice deadlock, but leave the hasp and put the lock through it not locking the door, or somewhere obvious, it look like you are in. Deadlocks can be hidden more easily as you only need a key sized hole. 2 Link to comment Share on other sites More sharing options...
dmr Posted December 24, 2018 Report Share Posted December 24, 2018 Another reason for not having a padlock (based on a real experiences reported by two friends) when you are inside the boat its very easy for bad people to put a screwdriver or a convenient stick through the hasp to lock you inside the boat whist they go through your front lockers or get the boltcroppers working to liberate your bike or generator. .............Dave 1 Link to comment Share on other sites More sharing options...
cereal tiller Posted December 24, 2018 Report Share Posted December 24, 2018 3 minutes ago, dmr said: Another reason for not having a padlock (based on a real experiences reported by two friends) when you are inside the boat its very easy for bad people to put a screwdriver or a convenient stick through the hasp to lock you inside the boat whist they go through your front lockers or get the boltcroppers working to liberate your bike or generator. .............Dave A friend had their Biggish Generator Stolen in the Manner you describe ,branches through Door Handles and Hasp. good Job the thieves were not Arsonists as well. My Friends could not get out of the Boat in ti me to stop the Thieves Loading the Generator into the Back of an Estate Car. Link to comment Share on other sites More sharing options...
Detling Posted December 24, 2018 Report Share Posted December 24, 2018 With a cruiser stern it is quite likely to be the main means of entry and exit. You need to make sure the hatch cannot be lifted up at either end when shut. The doors can use a Yale but these are easily jemmied open using the lip, unless the hatch drops down over the top. I have seen garage like locks used where the key on the centre moves two bolts, one each side, which hold the hatch to the side runners to prevent sliding and lifting. I have a similar locking up and over garage door but it came with the door and I don't know where to get them. Side doors are usually easily jemmied again due to the lip providing a nice leverage point. Front doors a bar across outside stops them opening. As said you need to be able to get out in a hurry, but you can have bars across when you are out, just need to take off when home. Link to comment Share on other sites More sharing options...
celiaken Posted December 24, 2018 Report Share Posted December 24, 2018 We have a pair of locks which fit roller garage doors, many combinations of key patterns and can be used from both sides of the door. quite easy to fit. Link to comment Share on other sites More sharing options...
pearley Posted December 24, 2018 Report Share Posted December 24, 2018 From years of installing both passive and active security on all types of cars and commercial vehicles I woild first say that if someone is determined to break into your boat, nothing will stop them. What you are really doing by improving security is buying time, either so they will be disturbed or getting them to break into your neighbours boat which may be less secure. Our boat, a Reeves Trad, has doors and hatch similar to yours. It has a large bar inserted into brackets bolted on the inside of the doors with a key operated bolt on the inside of the first leaf. The bolt shoots up behind the steel lip of the hatch thus preventing the hatch being slid open or the doors being opened. We have aluminium sliding doors at the front which have lockable sliding door bolts onnthe top edge, again preventing the doors from being opened and the same on the inside on both pairs of side doors. Link to comment Share on other sites More sharing options...
Ray T Posted December 24, 2018 Report Share Posted December 24, 2018 2 hours ago, TheBiscuits said: No Nay Never! Sorry cannot resist. Other versions are are available. Link to comment Share on other sites More sharing options...
Jim Riley Posted December 24, 2018 Report Share Posted December 24, 2018 I got a pair of locks from Spain where double doors are common. Yale type on the outside, a 20mm long throw bolt on the inside assing through a sturdy bracket on the other leaf. I tried several locksmiths here with no joy. I eventually came across them as "gate fastenings" in Parrs Builders merchants, after I had fitted the Spanish ones. My brother lives in Spain so was able to bring them over, cheap too, under €20 each. Link to comment Share on other sites More sharing options...
ditchcrawler Posted December 24, 2018 Report Share Posted December 24, 2018 54 minutes ago, Jim Riley said: I got a pair of locks from Spain where double doors are common. Yale type on the outside, a 20mm long throw bolt on the inside assing through a sturdy bracket on the other leaf. I tried several locksmiths here with no joy. I eventually came across them as "gate fastenings" in Parrs Builders merchants, after I had fitted the Spanish ones. My brother lives in Spain so was able to bring them over, cheap too, under €20 each. What these https://www.metalines.com/en/gate-locks/593-gatemaster-dgl-01.html?gclid=Cj0KCQiApILhBRD1ARIsAOXWTztYCwW-LKb34vbBtfmnWPW1WGTRGr8pXeae96jtujUI3-FhE_tyFqAaAmAuEALw_wcB#/keyed-alikeno/lock-barrellock-with-normal-eurocylinder Link to comment Share on other sites More sharing options...
Jim Riley Posted December 24, 2018 Report Share Posted December 24, 2018 Similar. The gate lock I saw, and the ones I have, are 20mm sq bolts, with a "tube" socket 25mm long. and bolted to the face of the other leaf. The Spanish ones don't have a key on the inside, just a sneck to flick to slide the bolt open. Link to comment Share on other sites More sharing options...
ditchcrawler Posted December 24, 2018 Report Share Posted December 24, 2018 2 minutes ago, Jim Riley said: Similar. The gate lock I saw, and the ones I have, are 20mm sq bolts, with a "tube" socket 25mm long. and bolted to the face of the other leaf. The Spanish ones don't have a key on the inside, just a sneck to flick to slide the bolt open. It would worry me to have key operated locks on the inside of the boat. Just think trying to put a key in in a smoky dark boat at night Link to comment Share on other sites More sharing options...
mrsmelly Posted December 24, 2018 Report Share Posted December 24, 2018 1 minute ago, ditchcrawler said: It would worry me to have key operated locks on the inside of the boat. Just think trying to put a key in in a smoky dark boat at night Quite so. I have yale type front and back that are easily opened from within with flush locks on front and rear outside of doors. This way no one knows if u are in or out and they deter opportunistic thieves. You can put the biggest most secure locks on yer narrowboat that money can buy but a proper scumbag intent and equipped to enter will always get in and on top of theft you will then have considerable damage to sort out. Link to comment Share on other sites More sharing options...
TheBiscuits Posted December 24, 2018 Report Share Posted December 24, 2018 9 minutes ago, ditchcrawler said: It would worry me to have key operated locks on the inside of the boat. Just think trying to put a key in in a smoky dark boat at night Just leave the key in the lock. Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now