Benno 1688 Posted June 30, 2018 Report Share Posted June 30, 2018 Hi I have had a core plug fail on the cylinder head. I have replaced it but it still has a slight leak, can anyone recommend something I can seal it with. Link to comment Share on other sites More sharing options...
MtB Posted June 30, 2018 Report Share Posted June 30, 2018 Core plugs are domed prior to fitting. The plan is to fit them dome side out then carefully hammer them out flat once in position. This is to make them expand slightly in diameter and make a seal. Did you know this and do this ok? 1 Link to comment Share on other sites More sharing options...
Benno 1688 Posted June 30, 2018 Author Report Share Posted June 30, 2018 No I didn’t. I will fit another thanks. Link to comment Share on other sites More sharing options...
MtB Posted June 30, 2018 Report Share Posted June 30, 2018 Aha that should fix it then!! Good luck and let us know how it goes. Plenty of expertise here if still no luck. Link to comment Share on other sites More sharing options...
RLWP Posted June 30, 2018 Report Share Posted June 30, 2018 45 minutes ago, Mike the Boilerman said: Core plugs are domed prior to fitting. The plan is to fit them dome side out then carefully hammer them out flat once in position. This is to make them expand slightly in diameter and make a seal. Did you know this and do this ok? If they are that kind of core plug, of course Richard Link to comment Share on other sites More sharing options...
Tony Brooks Posted June 30, 2018 Report Share Posted June 30, 2018 Beat me to it, too busy rubbing the paintwork down. I was going to say that later BMCs use at least some Welch plugs (second photo). Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now