jddevel Posted May 18, 2017 Report Share Posted May 18, 2017 Advice please. How do you: 1) Size buzz bars. 2) Best place to fix them. 3) How do you fix them. Lastly best source. Thank Link to comment Share on other sites More sharing options...
nicknorman Posted May 18, 2017 Report Share Posted May 18, 2017 1/ by max current and number of connections needed 2/ near where they are needed! 3/ depends on the type (insulated or non-insulated) but anyway, if you don't have a convenient bit of wood to attach them to, you could screw (or bond, if water is the other side) a thick sheet of ply onto steel. Various sources, here is one: https://www.asap-supplies.com/electrical-components/busbars-power-posts-connectors/busbars-power-distribution Also look for Blue Sea Systems and BEP Marine eg http://www.force4.co.uk/department/electrical/electrical-accessories/busbars-terminal-blocks.html Link to comment Share on other sites More sharing options...
mross Posted May 18, 2017 Report Share Posted May 18, 2017 And, if you are researching them, or looking for suppliers, they are properly called busbars or bus bars. (comes from the Latin omnibus - of all- because they carry all the current). Sometimes confused with Buss or Bussmann - a manufacturer of fuses. Link to comment Share on other sites More sharing options...
rusty69 Posted May 18, 2017 Report Share Posted May 18, 2017 (edited) I got some off ebay, although dont think they were listed as Busbars iirc. Edited May 18, 2017 by rusty69 Link to comment Share on other sites More sharing options...
jddevel Posted May 18, 2017 Author Report Share Posted May 18, 2017 Thank you. By maximum current does it mean total battery amperage? Link to comment Share on other sites More sharing options...
cereal tiller Posted May 18, 2017 Report Share Posted May 18, 2017 11 hours ago, mross said: And, if you are researching them, or looking for suppliers, they are properly called busbars or bus bars. (comes from the Latin omnibus - of all- because they carry all the current). Sometimes confused with Buss or Bussmann - a manufacturer of fuses. So that is why the Ticket collecting person on a Bus is called a conductor? 2 Link to comment Share on other sites More sharing options...
nicknorman Posted May 18, 2017 Report Share Posted May 18, 2017 4 minutes ago, jddevel said: Thank you. By maximum current does it mean total battery amperage? What does total battery amperage mean? By maximum current, it means the maximum current that could flow between different terminals on the busbar. This could be the full output of the alternator flowing into the battery (if the alternator connection to the battery is via the busbar). It could be the starter motor current (if the starter motor connection is via the busbar - probably not!). It could be the current to a 3kw inverter (if an inverter is fitted and routed via the busbar). But more likely it will be the maximum current going to the boat's 12v services - all depends on what the busbar is used for. Link to comment Share on other sites More sharing options...
Chewbacka Posted May 18, 2017 Report Share Posted May 18, 2017 The max current will be the sum of all the loads that use it. If you don't know the loads, what size is the master fuse for all the circuits it is feeding?? Link to comment Share on other sites More sharing options...
jddevel Posted May 18, 2017 Author Report Share Posted May 18, 2017 Quote The more I try and understand and think I`ve comprehended the advice from the forum the more I conclude that I need, in order to get this boat into the water in the next coupe of months, the professional to sort this part of the sailaway out. Once the basics are there I can study and learn. Just need to find the right boatyard for the job. Link to comment Share on other sites More sharing options...
nicknorman Posted May 18, 2017 Report Share Posted May 18, 2017 6 minutes ago, jddevel said: The more I try and understand and think I`ve comprehended the advice from the forum the more I conclude that I need, in order to get this boat into the water in the next coupe of months, the professional to sort this part of the sailaway out. Once the basics are there I can study and learn. Just need to find the right boatyard for the job. You're depressed. Sleep on it! Link to comment Share on other sites More sharing options...
jddevel Posted May 19, 2017 Author Report Share Posted May 19, 2017 Thank you Nicknorman. Sound advice. At my age finding the learning curve frustrating. Whilst I consider myself quite a practical person if I see something I find it easier to understand than the written word. Never been diagnosed with dyslexia but a mild form may be my problem- or is it an excuse for just being a bit thick!!! Link to comment Share on other sites More sharing options...
nb Innisfree Posted May 19, 2017 Report Share Posted May 19, 2017 Problem is you need to understand the subject to understand the answer. Link to comment Share on other sites More sharing options...
nicknorman Posted May 19, 2017 Report Share Posted May 19, 2017 2 hours ago, jddevel said: Thank you Nicknorman. Sound advice. At my age finding the learning curve frustrating. Whilst I consider myself quite a practical person if I see something I find it easier to understand than the written word. Never been diagnosed with dyslexia but a mild form may be my problem- or is it an excuse for just being a bit thick!!! No I think it just illustrates that "a picture is worth 1000 words". Link to comment Share on other sites More sharing options...
mross Posted May 19, 2017 Report Share Posted May 19, 2017 Googling 'busbar calculation' brings up lots of info, including this https://www.copper.org/applications/electrical/busbar/bus_table3.html I hope this is helpful? Obviously, it is intended for busbars carrying current for some distance whereas your busbar may only be a foot or so long, but it does give the basic sizing. Link to comment Share on other sites More sharing options...
WotEver Posted May 19, 2017 Report Share Posted May 19, 2017 Think about why you want the busbar. What's it for? Obviously it's feeding several things, so what are they? What is the maximum current that they could demand if they were all on at the same time? Once you know the answer to the last question you know what size busbar you require. Link to comment Share on other sites More sharing options...
mross Posted May 19, 2017 Report Share Posted May 19, 2017 The busbar calculation I quoted above does not allow for drilling and bolting conductors. Can anyone point OP at some relevant tables? Link to comment Share on other sites More sharing options...
rusty69 Posted May 19, 2017 Report Share Posted May 19, 2017 (edited) Or you could just buy the biggest you can find(space permitting) and forget the calculations Eg http://m.ebay.co.uk/itm/272642283054 Edited May 19, 2017 by rusty69 1 Link to comment Share on other sites More sharing options...
nicknorman Posted May 19, 2017 Report Share Posted May 19, 2017 11 minutes ago, rusty69 said: Or you could just buy the biggest you can find(space permitting) and forget the calculations Eg http://m.ebay.co.uk/itm/272642283054 Fine for -ve but I think id want something insulated for +ve. Link to comment Share on other sites More sharing options...
rusty69 Posted May 19, 2017 Report Share Posted May 19, 2017 (edited) 5 minutes ago, nicknorman said: Fine for -ve but I think id want something insulated for +ve. Good point. Built a cover for mine and used on negative only. Edited May 19, 2017 by rusty69 Link to comment Share on other sites More sharing options...
mross Posted May 19, 2017 Report Share Posted May 19, 2017 2 minutes ago, nicknorman said: Fine for -ve but I think id want something insulated for +ve. Well spotted. It's meant for earths, not live connectors. The insulation voltage is not even mentioned. Link to comment Share on other sites More sharing options...
andyb116 Posted May 19, 2017 Report Share Posted May 19, 2017 With my job I use buss bar p/no VA/189B/2 from a company called Furneaux Riddall, these comply with the BSS and all the relevant BMET ISO's. I have no connection with this company other than being a satisfied customer. They have a very good website. Link to comment Share on other sites More sharing options...
nicknorman Posted May 19, 2017 Report Share Posted May 19, 2017 26 minutes ago, andyb116 said: With my job I use buss bar p/no VA/189B/2 from a company called Furneaux Riddall, these comply with the BSS and all the relevant BMET ISO's. I have no connection with this company other than being a satisfied customer. They have a very good website. Useful shop, thanks. Only trouble is it doesn't quote any current or voltage ratings. Link to comment Share on other sites More sharing options...
mross Posted May 19, 2017 Report Share Posted May 19, 2017 Here's a meaty one https://www.mobilecentre.co.uk/index.php?main_page=product_info&products_id=678 Link to comment Share on other sites More sharing options...
andyb116 Posted May 19, 2017 Report Share Posted May 19, 2017 Nick Norman, if you blow the pictures of the covers up, it gives the current ratings on them, I thought the same when I ordered my first batch though. Link to comment Share on other sites More sharing options...
WotEver Posted May 19, 2017 Report Share Posted May 19, 2017 1 hour ago, andyb116 said: With my job I use buss bar p/no VA/189B/2 from a company called Furneaux Riddall, these comply with the BSS and all the relevant BMET ISO's. I have no connection with this company other than being a satisfied customer. They have a very good website. Nice 300A http://www.furneauxriddall.com/cgi-bin/sh000004.pl?WD=va%2f189b%2f2&PN=Enclosed-Busbar-4-x-6mm-Studs---12-x-4mm-Screws-VA_189B_2.html#SID=983 3 hours ago, nicknorman said: Fine for -ve but I think id want something insulated for +ve. Worth noting that the BSS demands a cover. Link to comment Share on other sites More sharing options...
Featured Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now